朔黄铁路POC语音调度系统服务质量测试方法研究

POC语音调度系统在朔黄铁路运营生产中发挥了重要作用,本文为朔黄POC语音调度系统设计了一种语音服务质量评价指标体系,并详细描述了各指标的计算公式和测试方法,为朔黄铁路LTE系统服务质量检测评价提供指导和支撑。     

基于虚拟化云技术的路局中心地震预警监测系统方案及联动研究

通过研究铁路地震预警监测系统现状和建设趋势,从资源共享、重复性建设、地震联动触发信号系统停车、牵引供电系统断电等多角度分析存在的问题,结合实际需求,提出铁路局中心系统采用虚拟化云技术的建设思路,并提出地震预警监测系统通过路局中心系统与信号RBC、牵引供电中心接口的联动触发策略。文中论述了采用虚拟化云技术搭建的地震预警监测铁路局中心系统功能、系统构成、硬件配置,从而解决各条铁路接入路局中心增加大量服务器等所带来的资源浪费严重、重复性建设等问题,为建设项目节省投资;阐述了通过路局中心系统与信号RBC、牵引供电中心接口的联动触发方案,为安全提供保障的同时尽可能节省建设投资和维护成本,更好地为铁路安全保驾护航。     

散粮输送工艺设备分析

通过对散粮输送行业中常见的工艺设备进行探究,分析设备运行过程中可能存在的问题,提出合理的解决方案,为散粮系统工艺设计及工程运行提供重要参考意义。     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.     

浅谈信号系统侧冲防护在城市轨道交通中的应用

防侧面冲突是信号系统最基本的安全功能之一,城市轨道交通信号系统如何在兼顾安全与效率的前提下进行侧冲防护,对整个信号系统的设计尤为重要.本文重点介绍了侧冲防护的原则及其防护原理.     

Impact assessment of extreme weather events on transport networks: A data-driven approach

The present paper presents a data-driven method for assessing the resilience of the European passenger transport network during extreme weather events. The method aims to fill in the gap of current research efforts regarding the quantification of impacts attributed to climate change and the identification of substitutability opportunities between transport modes in case of extreme weather events (EWE). The proposed method consists of three steps concerning the probability estimation of an EWE occurring within a transportation network, the assessment of its impacts and the passengers’ flow shift between various transport modes. A mathematical formulation for the proposed data-driven method is provided and applied in an indicative European small-scale network, in order to assess the impacts of EWE on modal choice. Results are expressed in passenger differentiated flows and the paper concludes with future research steps and directions.     

绿色公路技术LCA评价体系及效益分析

针对各类绿色公路技术难以横向比较的问题,文章从技术可行性、经济效益、节能减排效益等方面,提出建立绿色公路技术LCA评价体系,并以G312苏州西段工程为例进行综合效益分析,其综合效益最为显著,具备规模化、资源化、投资适宜的绿色公路技术;技术瓶颈问题的突破和创新,是推进绿色公路发展的根本动力;将绿色理念融入公路建设的全生命周期的前提,是因地制宜的前期规划布局研究,也是合理选择适宜绿色公路技术的基础。     

兰州地铁地温分布特性及其演化规律

以兰州地铁所在地区为研究对象,实测地铁隧道开挖前的地温(简称为初始地温),根据实测数据,提出地铁初始地温预测模型公式。采用非稳态传热的数值模型,分析运营条件下地铁隧道围岩温度的演化规律。结果表明:兰州地铁初始地温随环境气温和埋深的变化而变化;年变温层位于自地表至埋深12m处;年恒温层位于埋深12m及其以下,温度为15℃左右;年变温层中,1年内初始地温变化规律与环境气温变化规律相似,近似呈正弦曲线状分布,但存在相位滞后的现象;1年中初始地温的振幅随埋深的增大呈指数下降趋势。在隧道内空气与围岩之间热交换中,兰州地铁隧道围岩的温度及其梯度、热透厚度(未达到极限时)均与隧道内环境温度、热交换时间成正相关关系,但与距隧道内壁的距离成负相关关系。     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.     

汽车前照灯闪烁问题分析及设计优化

汽车前照灯是整车照明的重要组成,随着时代的发展,汽车前照灯的设计也越来越简单化、多样化。本文针对某车型项目阶段出现的前照灯闪烁问题,从前照灯的控制逻辑展开,分析故障产生的原因,并研究优化方案。