SCW-based Outsourcing Operation Modeling in the Case of Integrated Supply Chain Management

By analyzing the features of integrated supply chain management （SCM） and its environment, this paper puts forward the types of outsourcing under this environment and their functions for different type of outsourcing models. This paper also expresses the outsourcing operation model in the case of integrated SCM environment and the outsourcing management model based on CSCW. Through an operational example analysis and comparison, it can be seen that the modeling that is set up in this paper is feasible and effective.     

铁路货物运输市场价格优化模型研究

常用的定价方法主要是成本定价法、投资回报率法以及目标利润率方法等,但这些方法在使用时不易掌握,不能分析各类市场因素对价格水平的影响以及影响程度。为了能够在定价中综合考虑市场因素,根据优化理论建立了铁路货物运输市场价格模型,模型中以收入与支出的差额最大化为优化目标,以运输价格水平与货物的市场价格水平之间保持一定的比例为约束,其结果描述了各种因素与价格之间的关系,由此可以分析影响运价的价格弹性、各种运输方式的市场份额等主要因素的作用和影响,并通过具体示例进行了价格测算。     

基于灰理论的港口吞吐量预测研究

港口吞吐量是港口建设的重要依据,有效预测港口吞吐量,才能使港口在海洋运输业中发挥重要作用。灰理论预测可以在少量信息、不完全数据的情况下,揭示港口吞吐量的发展变化特征,是研究港口吞吐量的有效工具。本文对上海港货物吞吐量进行研究的结果表明,应用灰理论对港口吞吐量建立灰色模型GM(1,1)进行短期预测,其结果有较高的实用价值。     

地震作用下高速铁路桥梁的动力响应及行车安全性研究

将桥梁在地震作用下的运动方程和车辆振动方程，通过桥梁子系统与车辆子系统间的非线性轮轨接触关系联系起来，建立可考虑多点激励与行波效应的车桥系统地震反应动力学分析模型。以某高速铁路连续梁桥为例，对非一致地震激励下桥梁结构的动力响应及桥上车辆运行安全性进行研究，提出确保地震发生时高速列车在桥上安全运行的临界速度限值，可供实际工程设计时参考。     

地铁降压变电系统构成和施工调试

本文对地铁降压变电系统的构成、各电压等级供电系统的特点和施工调试等进行了阐述,使大家对该系统的设计和现场调试有一个全面的了解和认识,便于工程施工、调试和安全运行。     

Estimation of value of travel time reliability

In mode choice decision, travelers consider not only travel time but also reliability of its modes. In this paper, reliability was expressed in terms of standard deviation and maximum delay that were measured based on triangular distribution. In order to estimate value of time and value of reliability, the Multinomial and Nested Logit models were used. The analysis results revealed that reliability is an important factor affecting mode choice decisions. Elasticity is used to estimate the impacts of the different policies and system improvements for water transportation mode. Among these policies, decision maker can assess and select the best alternative by doing the benefit and cost analysis based on a new market share, the value of time, and the value of reliability. Finally, a set of promising policies and system improvement of the water transportation were proposed.     

利用Boussinesq方程对作用于大直径圆筒结构上的波浪力进行数值模拟

采用求解Beji和Nadaoka改进的Boussinesq方程,模拟了波浪在多个串连大圆筒结构前的反射,得到了作用于圆筒结构上的波浪力。空间离散采用有限元方法,可以较好地适应圆筒结构表面形成的复杂边界形状。数值模拟结果与公开发表的物理模型试验成果进行了比较,符合较好。     

全回转拖轮的阻力性能分析

论述全回转拖轮的阻力性能特点,通过船模试验结果验证全回转拖轮在自航状态时兴波阻力是总阻力中的主要成分,结合有关实船论述船舶主尺度、船型系数及线型对阻力性能的影响,阐明如何设计和建造阻力性能好的全回转拖轮。     

拱形单元组合抗滑桩体型研究

提出一种新型的抗滑结构体系,即拱形单元组合抗滑桩,并总结了几种结构组合形式;以工程实际为背景,在假定抗滑桩为刚性嵌固的前提下应用有限元分析软件ANSYS对其上部结构进行建模分析,结果表明该新型抗滑桩具有良好的空间受力性能和整体刚度,顶端位移较常规抗滑桩有大幅度减少。