孕妇血清铜值与胎盘功能的关系

用火焰原子吸收法测定了孕28～40周正常孕妇83例,孕37～40周重度妊娠高血压综合征及41周以上妊娠妇女42例的血清铜值,并与同期尿E/C比值及新生儿Apgar评分相比较,结果提示:孕妇血清铜值在40周前随孕周的增长而增高。41周以上妊娠,重度妊高征血清铜值偏低。当尿E/C比值<10及Apgar评分≤7分时,孕妇血清铜值低,提示孕晚期母亲血清铜值可作为判断胎盘功能的辅助指标。     

任意多面体消隐系统的研究

本文在相交凸多面体隐藏线消除方法研究的基础上.运用体素构形的方法.进一步探讨了凹多面体的数据结构以及凹多面体在不同情况下隐藏线消除的可能性,从而建立了一个任意平面体的消隐系统.     

弹性接触问题的位移-力法有限元解法研究

本文根据接触状态下的有限元基本方程,通过对定解条件、约束条件的分析应用,得出了仅与接触点有关的定解方程。 运用所编制的电算程序对某柴油机副连杆销及孔在最大载荷下的失圆变形进行了计算。通过采用空心及实心销两种简化模型计算得出了实际副连杆销的失圆变形范围。     

Stress intensity factor measurement of cracks using piezoelectric element

A stress intensity factor (SIF) measurement method for cracks using a piezoelectric element and an electrostatic voltmeter is presented. In this method, an isotropic piezoelectric element is first attached near the tip of the crack. Then surface electrodes are attached to three different positions on the piezoelectric element. The electric potentials of the surface electrodes, which are proportional to the sum of the stress ( _x + _y ) on the structural member, are measured by an electrostatic voltmeter during load cycling. The mode I and mode II SIFs of the crack are estimated using the relationship between the SIF and ( _x + _y ). The applicability of the proposed method is examined through experiments and numerical analysis.     

灰色理论在养护决策中的应用研究

选取平整度、车辙、抗滑能力、路面破损作为控制指标,采用灰色聚类法对养护路段进行分类,以达到科学决策的目的,可为类似公路的养护提供参考。     

Parallel computing with domain decomposition for the vehicle crashworthiness simulation

The research presented in the paper deals with explicit nonlinear finite element calculation with domain decomposition for vehicle crashworthiness simulation. This is very important for vehicle design. Parallel computing is an efficient solution method to speedup and enhance the solving ability of large-scale numerical simulation. In this paper, a cost-effective domain decomposition method based on contact balance is presented, and the algorithm flowchart including contact computing is provided, and the parallel computing process and communication overhead are analyzed. Furthermore, scalability of the parallel computing method on different hardware platforms, the SGI Onyx 3800 and the ShenWei cluster, is studied. Finally, the effect of different domain decomposition strategy on vehicle crashworthiness simulation computing efficiency is presented. To end users, the research results should provide a reference for vehicle design and choosing appropriate hardware platform and computing software.     

Normal and shear forces in the contact patch of a braked racing tyre. Part 1: results from a finite-element model

In this first part of a two-part article, a previously described and validated finite-element model of a racing-car tyre is developed further to yield detailed information on carcass deflections and contact pressure and shear stress distributions for a steady rolling, slipping, and cambered tyre. Variations in running conditions simulated include loads of 1500, 3000 and 4500 N, camber angles of 0° and ?3°, and longitudinal slips from 0% to?20%. Special attention is paid to heavy braking, in which context the aligning moment is of great interest. Results generated are in broad agreement with limited experimental results from the literature and they provide considerable insight into how the tyre deforms and how the contact stresses are distributed as functions of the running conditions. Generally, each rib of the tyre behaves differently from the others, especially when the wheel is cambered. The results form a basis for the development of a simpler physical tyre model, the purpose of which is to retain accuracy over the full operating range while demanding much less computational resource. The physical tyre model is the topic of the second part of the article.     

C15H13N2S2生物活性分子的光谱与热力学性质

为了获得N-苯亚甲基-4-[(2-氰基亚胺基-1,3噻唑烷-3-基)甲基]-噻唑-2-胺(C15H13N2S2)生物活性分子的光谱数据和不同温度下的热力学性质,使用密度泛函理论的B3LYP方法,进行几何构型优化和频率计算,使用含时密度泛函理论的DT-B3LYP方法,计算该分子在气相和不同溶剂中的电子吸收光谱.结果表明,优化得到的最稳定结构与实验晶体结构一致;气相中吸收峰出现在近紫外区370 nm处,溶剂几乎不影响跃迁性质,但吸收强度明显增大;标准摩尔熵与温度线性正相关,相关系数为0.999 05.     

高压中和喷涂CFB锅炉三管防磨新工艺

CFB锅炉三管严重磨损引起国内、外专家们极大地关注。较详细地论述了三管磨损的原因，并提出了解决防磨新工艺、新材料。在6台CFB锅炉防磨实践中大大延长了使用寿命，取得成功。与当今国内、外所用的防磨技术相比，本技术的工艺与材料有独特的优越性：防高温氧化、耐硬物料粒子高速冲刷磨损、合金涂层结合密实牢固、抗冲击。该技术获国家发明专利。