沥青路面面层-基层层间抗剪性能研究

为了对目前山区沥青路面常见的面层-基层滑移破坏问题提出有效的防治措施,文章通过室内试验,在AC-20混合料面层与半刚性基层之间洒铺基质沥青、SBS改性沥青、SBR改性乳化沥青,同时选择在20℃和52,7℃温度条件下,对试件进行45°斜剪试验,对比在不同材料、温度条件下的面层-基层层间抗剪强度。试验结果表明:层间经处理后的粘结强度均有不同程度的增加,增幅最大的是在层间洒布了SBS改性沥青,增幅最小的是在层间洒布了基质沥青;高温条件下,面基层间的抗剪切强度仅为常温条件下的8%~10%,说明温度对AC-20沥青层与半刚性基层间的抗剪切强度有很大的影响。研究结果可为增强面基层层间粘结力提供指导。     

高低塔斜拉桥抗震设计分析

高低塔斜拉桥由于结构不对称,使其受力特性也体现出不对称性,因此对此类桥梁的抗震分析显得尤为重要。文章以广西某特大桥为工程实例,建立空间有限元模型进行抗震分析,对设置阻尼器提高桥梁抗震性能提供了可靠的理论依据,并介绍了有限元分析的详细过程,可为今后同类桥梁的抗震设计提供参考。     

基于反分析法的均质路堑滑坡治理技术研究

反分析方法与计算机技术的结合使其功能越来越强,在实际工程中得到越来越多的应用与研究。采用反分析法确定边坡岩土体抗剪强度参数从而得出对滑坡治理的设计参数。基于简化Bishop法建立反分析极限平衡方程,并采用计算剖面多组单参数反演与统计比较分析相结合的方法,优化反算岩土抗剪强度参数值。该方法应用于某均值路堑滑坡治理工程并得以论证,表明了反分析法应用于滑坡治理的可行性与正确性。     

Motorway crash duration and its determinants: do durations vary across motorways?

Traffic congestion has been a growing issue in many metropolitan areas during recent years, which necessitates the identification of its key contributors and development of sustainable strategies to help decrease its adverse impacts on traffic networks. Road incidents generally and crashes specifically have been acknowledged as the cause of a large proportion of travel delays in urban areas and account for 25% to 60% of traffic congestion on motorways. Identifying the critical determinants of travel delays has been of significant importance to the incident management systems, which constantly collect and store the incident duration data. This study investigates the individual and simultaneous differential effects of the relevant determinants on motorway crash duration probabilities. In particular, it applies parametric Accelerated Failure Time (AFT) hazard‐based models to develop in‐depth insights into how the crash‐specific characteristic and the associated temporal and infrastructural determinants impact the duration. AFT models with both fixed and random parameters have been calibrated on one year of traffic crash records from two major Australian motorways in South East Queensland, and the differential effects of determinants on crash survival functions have been studied on these two motorways individually. A comprehensive spectrum of commonly used parametric fixed parameter AFT models, including generalized gamma and generalized F families, has been compared with random parameter AFT structures in terms of goodness of fit to the duration data, and as a result, the random parameter Weibull AFT model has been selected as the most appropriate model. Significant determinants of motorway crash duration included traffic diversion requirement, crash injury type, number and type of vehicles involved in a crash, day of week and time of day, towing support requirement and damage to the infrastructure. A major finding of this research is that the motorways under study are significantly different in terms of crash durations; such that motorway 1 exhibits durations that are on average 19% shorter compared with the durations on motorway 2. The differential effects of explanatory variables on crash durations are also different on the two motorways. The detailed presented analysis confirms that looking at the motorway network as a whole, neglecting the individual differences between roads, can lead to erroneous interpretations of duration and inefficient strategies for mitigating travel delays along a particular motorway.     

An exact modelling of the uniform control traffic delay in undersaturated signalized intersections

The average delay experienced by vehicles at a signalized intersection defines the level of service (LOS) at which the intersection operates. A major challenge in this regard is the ability to accurately estimate all the components underlying the overall control delay, including the uniform, incremental and initial queue delays. This paper tackles this challenging task by proposing a novel exact model of the uniform control delay component with a view to enhancing the accuracy of the existing approximate models, notably, the one reported in the Highway Capacity Manual 2010. Both graphical and analytical proofs are employed to derive exact closed‐form expressions for the uniform control delay at undersaturated signalized intersections. The high degree of accuracy of the proposed models is analysed through extensive simulations to demonstrate their abilities to exactly characterize the performance of real‐life intersections in terms of the resulting vehicle delay. Unlike the existing widely adopted uniform delay models, which tend to overestimate the LOS of real‐life intersections, the delay models introduced in this paper have the merit of exactly capturing such a LOS. Copyright © 2016 John Wiley & Sons, Ltd.     

高温烟气膨胀节爆裂原因分析与对策

文中从失效波纹管的化学成份、力学性能、显微组织、裂纹与断口及腐蚀产物等方面进行检测,并结合波纹管工作状况对波纹管进行应力计算及检测结果分析,探讨高温烟气膨胀节爆裂失效的原因及防护措施。     

聚合物水泥混凝土复合式路面关键技术研究

聚合物水泥混凝土（犘犆犆）复合式路面是针对普通水泥路面的缺陷而提出的一种新型路面结构形式。文章对犘犆犆的材料选择与制备以及路用性能进行了研究,指出犘犆犆在强度、刚度、抗弯拉疲劳性能、耐久性能等方面相对普通水泥混泥土有着明显的优势,同时结合工程实例,分析了犘犆犆复合式路面关键施工技术中存在的问题,并提出相应的解决措施。     

船载GPS在内河海事监管中的应用研究

文章阐述了百色辖区内河的通航环境、渡口渡工特点和营运渡船状况,分析了远洋航行定位技术在百色右江客渡船舶上运用的可行性,并提出了利用船载GPS设备进行内河海事监管的具体措施,为提升海事监管能力提供有效的技术支持。     

基于PHA-LEC-SCL法公路隧道施工安全评价研究

为了制定科学的公路隧道施工安全评价的基本模式,针对公路隧道施工的危险、有害因素的危害程度及特殊工艺,将公路隧道施工系统分为隧道开挖、爆破、施工用电、施工通风、出碴与洞内运输、支护衬砌等6个主要子系统.运用预先危险性分析法(PHA)对公路隧道施工的危险、危害因素进行辨识和定性分析,结合作业条件危险性评价法(LEC)对公路隧道施工系统中各子系统进行危险性评价,定量分析计算PHA中的子系统各个危险因素的危险等级,并采用安全检查表(SCL)对公路隧道施工现场进行安全综合评价,建立了安全评价方法之间的内在联系.PHA-LEC-SCL法确立了公路隧道施工安全评价的基本模式.     

大跨度连续刚构桥施工期截面应力测试与分析

广西布柳河大桥主桥为主跨235m、墩高97米、桥宽仅8.3米的特柔预应力混凝土连续刚构桥。文章结合主桥施工监控实践,介绍大跨高墩连续刚构桥施工期截面应力测试及数据分析的方法,为同类桥型施工提供参考。