沥青DSC吸热峰特征值与感温性指标相关性分析

为分析用DSC吸热峰的何种特征值来表征沥青的感温性能，对DSC吸热峰能量值、峰宽度值、峰值温度和针入度指数、针入度粘度指数的相关性进行分析，得出结论：DSC吸热峰能量值和峰宽度值与针入度指数和针入度粘度指数都具有良好的相关性，吸热峰能量值和峰宽度值可以用来表征沥青的温度敏感性。     

奇摄动三阶非线性边值问题

利用微分不等式技巧和Volterra型积分算子，研究了三阶非线性奇摄动边值问题εx^(3)=f(t,x,x′,w(ε）x^(3)，ε），g（x′（0），x″（0）=0，x（1）=A，x′（1）=B的存在性及渐近估计。     

城市轨道交通高峰线路客流协同控制方法

在线路客流控制中，需同时考虑各个车站控流方案的可执行性与协同性. 采用 Fisher 最优分割法确定合理客流控制时段，基于此建立以乘客总等待时间最少和旅客周转量最大为目标的线路客流协同控制线性规划模型. 基于成都地铁2 号线AFC数据进行实验，针对协同控流与非协同控流方案，以及不同客流控制时段划分方案下的协同控流方案进行对比实验. 算例中：协同控流方案在旅客周转量下降约1.0%的情况下，乘客总等待时间减少约 56.7%；基于Fisher 最优分割法确定的时段划分方案中协同控流方案在乘客总等待时间方面最优，并具有很好的可执行性.     

Prediction of thermal environment via revision of PMV index with body temperature

PMV （Predicted Mean Vote） is a widely used index for evaluating the thermal environment. However, few studies have been conducted to take physiological values directly as evaluating indices. This paper assumes a linear relation between body temperature and both sweating rate and heat produced by shivering, and introduces the linear relation into the human heat balance equation to revise the classic PMV. And the assumption of linear relation is subsequently proved. The revised PMV possesses the same characteristic of dependent heat load as that of the classic one, and moreover it is convenient to be calculated.     

A practical assessment of stated preferences methods

Stated preferences data in the form of rankings, ratings and choices were collected in Santiago and discrete choice models estimated with them. The models were compared in terms of accuracy v/s the cost of obtaining the information and models. All methods produced reasonable but different models and fairly close subjective values of time. In terms of production costs the ranking method was a clear looser although the experimental design was slightly biased against it. Finally, the use of computerised interviews is highly recommended particularly for dealing with low income people.     

建立整数型轨道状态最优综合维修计划模型

为实现高效的轨道不平顺养护维修,建立最优养护维修计划模型和采用大型养路机械进行作业是十分重要的。本文以养护维修时间为决策变量,以年度轨道不平顺平均值最小为目标函数,在考虑了一系列约束函数的情况下,建立了整数型轨道状态最优综合维修计划模型。该模型能有效利用现场的养护资源,从安全和舒适的角度出发来制定养护计划,该模型的建立从理论上解决了轨道不平顺状态计算机辅助决策系统的关键问题。     

PMM tests in a circulating water channel and nonlinear analysis

As a result of frequent marine disasters leading to the loss of human life and pollution of vast areas of the ocean, ship manoeuvrability has become a very important characteristic of ship design. Among several recent experimental techniques to determine ship manoeuvrability, the most popular is captive model testing using a planar motion mechanism (PMM). This article describes some tests, analyses, and results of PMM tests in a circulating water channel (CWC) using a model of a training ship. The hydrodynamic forces and moments acting on a model of the training ship Shioji Maru in pure yawing motion were measured, and hydrodynamic derivatives were obtained using two different methods of analysis: singular value decomposition (a least-squares fit method) and Fourier analysis. Derivatives obtained from the tests were used to simulate the turning trajectory of the actual ship, and these were compared with the results of sea trials. The results indicate that both methods of analysis yield fairly similar derivatives. The simulation results were also found to be a close match with the trial results. Received: February 7, 2002 / Accepted: May 14, 2002 Address correspondence to: K. Shoji (shoji@ipc.tosho-u.ac.jp)     

世界银行贷款项目“卫津路拓宽工程”的经济效益计算

本市以天津城市主干道卫津路拓宽改造工程为例，论述城市道路经济效益计算方法。按全天高峰小时、非高峰小时，分别计算机动车和非机动车的运营成本、时间价值及事故费用，采用有、无项目对比法．进行经济效益计算。经济效益中以车辆行程时间延误与路口时间延误的节约作为主要效益。     

钢筋混凝土桥柱新配筋方式研究

该文结合轴心抗压试验,介绍了钢筋混凝土桥柱的配筋方式,可供类似结构设计借鉴参考。     

Performance estimation model of a torque converter part I: Correlation between the internal flow field and energy loss coefficient

The objective of this paper is to improve the performance estimation model of the internal flow field of a torque converter. Compared with performance experiment results, the converter based on the one-dimensional model does not satisfy the performance requirements demanded in practice. Therefore, we need to develop more predictable and reliable performance estimation models. In order to obtain shape information on three-dimensional blade geometry, a process of reverse engineering conducts a torque converter assembly, impeller, turbine and stator. In addition, a CFD simulation including mesh generation and post-processing was carried out to extract equivalent parameters from the internal flow field. The internal flow field can be explained by analyze the correlation between a performance estimation model and CFD analysis. The equivalent performance model adopts the variation of energy loss coefficients for a given operating condition according to the application of a changing energy loss coefficient by the least mean squares method. The estimated equivalent model improves the agreement in performance between experiments and the theoretical model. This model can reduce the error to within about 3 percent. Furthermore, this procedure for predicted performance achieves eminence in the estimation of the capacity factor.