液压马达实验方法研究

介绍了液压试验分类方式,根据其独具的特点对在用液压马达性能试验加载方法进行分析,并分类对工程机械用各种液压马达在泵工况下进行试验的可行性进行了探讨.     

俄罗斯货车轴箱装置的可靠性分析

介绍了俄罗斯有关部门对货车轴箱装置进行的可靠性分析,并对轴箱装置的结构进行了改进.     

刮水/洗涤器试验装置

介绍长丰汽车公司自制的刮水/洗涤器试验装置的功能和构成,论述其上位机、下位机和水路系统的工作原理。     

自动变速器控制技术研究

自动变速器的控制技术影响到变速器使用性能,介绍现代控制理论在自动变速器控制中的应用,如换档点控制,变矩器闭锁离合器控制,换档质量控制,适应性控制,模糊控制,容错控制等理论。     

日立公司出口欧洲铁路车辆技术

介绍了日立公司出口英国的395型高速列车的技术,以及在车辆研发过程中遇到的标准不同的问题,并概述了在防碰撞方面采取的特殊措施。     

基于LabVIEW和PXI的电力机车电气综合性能测试系统

介绍了电力机车电气综合性能测试平台的基本组成,从硬件平台、软件设计等方面详细分析了基于LabVIEW和PXI的电力机车电气综合性能测试系统的开发应用。     

钢桥面板顶板-纵肋连接接头的疲劳性能

对钢桥面板整体模型进行了有限元分析。结果表明,顶板横向应力在横桥向的分布表现出类似弹性支承多跨连续梁的受力特点,且顶板横向应力基本全部为弯曲应力,膜应力很小,在顶板-纵肋连接处纵肋应力远小于顶板横向应力。顶板-纵肋连接处的应力纵向和横向影响线很短,疲劳验算可不考虑同一车辆轴重间的相互影响及多车效应。增加顶板厚度可大大降低顶板的应力幅,铺装层的完整性对钢桥面板十分重要。此外,还对该类型接头的疲劳分级及现行欧洲规范Eurocode和美国规范AASHTO LRFD的相关条款进行了分析。为考虑车辆荷载通过引起的非成比例多轴疲劳效应,轮荷载滚动加载足尺模型试验和分析方法需要进一步深入研究。     

Impact of inerter nonlinearities on vehicle suspension control

This paper discusses the nonlinear properties of inerters and their impact on vehicle suspension control. The inerter was recently introduced as an ideal mechanical two-terminal element, which is a substitute for the mass element, where the applied force is proportional to the relative acceleration across the terminals. Until now, ideal inerters have been applied to vehicle, motorcycle and train suspension systems, in which significant performance improvement was achieved. However, due to the mechanical construction, some nonlinear properties of the existing mechanical models of inerters are noted. This paper investigates the inerter nonlinearities, including friction, backlash and the elastic effect, and their influence on vehicle suspension performance. A testing platform is also built to verify the nonlinear properties of the inerter model.     

The effects of wheelset driving system suspension parameters on the re-adhesion performance of locomotives

In this study, in order to examine the effects of a wheelset driving system suspension parameters on the re-adhesion performance of locomotives, the stick–slip vibration was analysed according to theoretical and simulation analysis. The decrease of the slip rate vibration amplitude improved the stability of the stick–slip vibration and the re-adhesion performance of locomotives. Increasing the longitudinal guide stiffness of the wheelset and the motor suspension stiffness were proposed as effective measures to improve the re-adhesion performance of locomotives. These results showed that the dynamic slip rate was inversely proportional to the series result of the square root of the longitudinal guide and motor suspension stiffness. The larger the motor suspension stiffness was, the smaller the required longitudinal guidance stiffness was at the same re-adhesion time once the wheel slip occurred, and vice versa. The simulation results proved that the re-adhesion time of the locomotive was approximately proportional to amplitude of the dynamic slip rate. When the stick–slip vibration occurred, the rotary and the longitudinal vibrations of the wheelset were coupled, which was confirmed by train's field tests.     

船用V型高速柴油机相继增压计算分析

建立了某船用V型柴油机采用两台增压器相继增压的计算模型,为验证计算模型、程序和所选参数的正确性,对常规增压进行了计算,计算与试验结果基本一致.对两台增压器相继增压进行计算分析的结果表明,采用相继增压可明显改善该型机低工况性能,扩大了该机作为船用主机的运行范围.