桥面物理除冰雪加热功率与环境因素关系分析

为解决化学融雪剂腐蚀桥梁结构和污染环境的问题，提出桥面敷设加热电缆方式除冰雪技术方案，以30m预应力混凝土T梁桥、沥青混凝土桥面为分析对象，进行了瞬态热分析和稳态热分析，系统研究了在桥面加热升温和稳态融雪节段加热功率与环境温度和环境风速的关系。经分析可知桥面加热过程可分为滞后、升温和稳态三个阶段，得出了一些有意义的结论，可为桥面敷设加热电缆除冰雪设计提供理论参考。     

Shifting from car to active transport: A systematic review of the effectiveness of interventions

IntroductionA promising way to stimulate physical activity is to promote the choice for active modes of transport (walking and cycling). Over the past years, several interventions and policies have been implemented to stimulate this mode shift. However, information concerning the effectiveness of these interventions and policies is still limited. The aim of the present study was to systematically review the effectiveness of interventions designed to stimulate a shift from car use to cycling or walking and to obtain insight into the intervention tools that have been used to promote and/or implement these interventions.MethodsFive databases were searched and articles published in English, Dutch, German, Danish, Norwegian and Swedish were included. Only studies that focussed on a mode shift from car use towards active transport in a general adult population, which were published in peer reviewed journals and which investigated effectiveness were included. Intervention tools used were categorized by using the model of Hoogerwerf & Herweijer, as either legal, economic (subsidy, reward system, penalty), communicative (written materials, behavioural tools) and physical tools (providing bicycles, providing better bicycle facilities at work, adjustment of the environment).ResultsNineteen studies met our inclusion criteria. Studies included described work-place-based interventions, architectural and urbanistic adjustments, population-wide interventions, and bicycle-renting systems. Nearly all studies (except three) showed positive effects concerning a mode shift. Most of the included studies used more than one intervention tool and the tools used differed between types of interventions. However, information about the statistical significance of these results was often lacking and the study methodologies used were not of high quality.ConclusionNearly all studies showed results in a positive direction. However, the quality of the included studies was mostly low and intervention characteristics were poorly described.     

Phase change analysis of an underwater glider propelled by the ocean＇s thermal energy

The phase change characteristic of the power source of an underwater glider propelled by the ocean＇s thermal energy is the key factor in glider attitude control. A numerical model has been established based on the enthalpy method to analyze the phase change heat transfer process under convective boundary conditions. Phase change is not an isothermal process, but one that occurs at a range of temperature. The total melting time of the material is very sensitive to the surrounding temperature. When the temperature of the surroundings decreases 8 degrees, the total melting time increases 1.8 times. But variations in surrounding temperature have little effect on the initial temperature of phase change, and the slope of the temperature time history curve remains the same. However, the temperature at which phase change is completed decreases significantly. Our research shows that the phase change process is also affected by container size, boundary conditions, and the power source＇s cross sectional area. Materials stored in 3 cylindrical containers with a diameter of 38ram needed the shortest phase change time. Our conclusions should be helpful in effective design of underwater glider power systems.     

ZPW-2000A自动闭塞模拟试验

以成功应用于京沪线提速工程中的自动闭塞系统为例,介绍了ZPW-2000A的试验流程和模拟试验方法,并针对ZPW-2000A特有的小轨道探讨了模拟方案.     

大功率整流器换流问题研究

理论上分析了大功率整流电路换流过渡过程，分析了换流过电压、关断功率与阻尼电路参数间的相互关系，提出换流过电压和关断功率的计算方法与计算公式，进一步探讨了如何合理配置阻尼保护电路参数。特别指出在大电流瞬时关断功率比换流过电压具有更大的危害性。为消除元件在换流过程中的关断损坏，还推荐一种改进型整流电路。     

带功率因数补偿的单相半控桥整流器(一)

介绍了绘制正弦线电流的开关模式单相半控桥整流器,用它来获得功率因数补偿并保持直流环节电压的恒定.在该整流器中使用4个有源开关,以便在交流端电压上产生单极脉宽调制(PWM)电压波形.与中性点箝位变流器(NPC)相比,该整流器没有箝位二极管也能实现三点式PWM控制.控制电路采用两个控制回路:外部控制回路用比例积分电压控制器调整直流环节电压,采用相位闭环电路产生与电源电压同相的正弦波形来实现功率因数补偿.在内部控制回路中,用基于载波的电流控制器跟踪线电流信号.为补偿由于负载变化所引起的中点电压,控制电路采用中点电压补偿器.该整流器的交流侧可产生3个电压电平,并用计算机仿真与试验结果验证了控制算法的有效性.     

动对动GPS相对定位系统中整周模糊度求解

为解决GPS技术实现困难的问题,在证明动对动GPS定位时,模糊度整数解搜索准则和静态时是一样的结论基础上,认为动对动模糊度整数解搜索可以直接引用静态测量已有的理论,动对动模糊度解算的关键是"快速"计算模糊度的实数解,并应用最小二乘准则给出动对动GPS定位时的模糊度实数解求解公式。试验数据计算表明,计算时只需少数几个历元数据,模糊度实数解就收敛到整数解附近,且方差较小,因而模糊度的备选值较少,只需几次试算即可确定正确解,从而达到"快速"解算的目的。     

浅谈项目实施阶段工程造价管理

市场经济的变化多端,使工程投资的确定与控制变得更为复杂。对工程造价的控制就是建设单位在满足项目合理的质量标准的前提下,在投资决策阶段,设计阶段和建设项目实施阶段中把工程项目发生控制在批准的限额内,力求在各个建设项目中合理使用人力、物力、财力,取得较好的投资效益和社会效益,工程造价的控制与管理是一个动态的过程。这就需要建设单位对工程造价的管理始终贯穿于项目的全过程,实施阶段的工程造价管理是实施建设工程全过程管理的重点。可以分为三个环节：招标管理、施工管理和结算管理。     

基于有效绿灯时间利用率的自适应控制策略研究

为了优化单点交叉口信号控制方案,使其适应各个进口道方向交通流动态变化,提高交叉口通行效率,根据交叉口进口道排队车辆数建立有效绿灯利用率模型,提出了一种交叉口自适应控制策略.有效绿灯时间利用率模型以交叉口通行能力最大为控制参数,实时优化确定出最佳相位放行方案以及最优相位切换方案,根据进口道排队车辆最大流向的排队车辆数和车辆到达预测确定相位放行绿灯时间.利用VISSIM交通仿真软件对该自适应控制策略仿真运行,与定时控制以及感应控制对比,评价分析不同车辆到达情况下交叉口通行情况.结果表明:该自适应控制策略能有效降低车均延误,提高交叉口服务水平.     

Reliability Analysis of Excavator Rectifier Feedback System with Multi-State Components Based on Belief Universal Generating Function Method

In view of the complexity and uncertainty of system, both the state performances and state probabilities of multi-state components can be expressed by interval numbers. The belief function theory is used to characterize the uncertainty caused by various factors. A modified Markov model is proposed to obtain the state probabilities of components at any given moment and subsequently the mass function is used to represent the precise belief degree of state probabilities. Based on the primary studies of universal generating function(UGF)method, a belief UGF(BUGF) method is utilized to analyze the reliability and the uncertainty of excavator rectifier feedback system. This paper provides an available method to evaluate the reliability of multi-state systems(MSSs) with interval state performances and state probabilities, and also avoid the interval expansion problem.