广西洛维大桥主桥箱梁加固设计方案

文章以广西洛维大桥为研究对象,介绍了该桥主桥箱梁存在的主要病害,分析了病害产生的原因,提出了针对性的加固方案,并通过结构验算验证了方案的可行性,为今后类似桥梁的加固改造施工提供技术参考。     

高密度电法在某铁路隧道检测中的应用

文章以京包线旗下营隧道工程为例,通过比较高密度电法与地质雷达法酮优劣,提出采用高密度电法进行隧道病害检测,并总结了在应用高密度电法前应进行的准备工作,阐述了高密度电算法在现场检测时的具体操作方法和注意事项。     

施工最大悬臂状态梁桥P-Δ效应有限元分析

文章以赣江大桥和宁海新桥特大桥为研究对象,利用有限元模型对其主桥施工最大悬臂状态下P-Δ效应进行了计算,分析了考虑P-Δ效应时的桥梁位移与应力变化情况,为今后类似工程的设计计算和施工监控提供参考。     

梧州西江四桥主桥结构设计及受力分析

文章结合梧州西江四桥主桥工程方案,介绍了该主桥桥型的结构受力特性,阐述了主桥各主要构件的设计要点,并通过静力计算及动力分析,验证了该主桥结构设计方案的合理性和可行性。     

高真空击密法在吹填土地基处治中的应用

文章针对钦州保税港吹填土地基施工区域的工程地质情况,提出了高真空击密地基处治方法,阐述了该方法的基本原理,并通过试验段相关试验检测,探讨了该方法的加固处治效果。     

基于X-ray CT和离散元法级配离析对沥青混合料骨架结构力学性能的影响

为从细观角度探究分析级配离析对沥青混合料骨架结构力学性能的影响,基于X-ray CT断层图像扫描技术和离散元法建立三维混合料骨架模型,对不同级配离析情况下的混合料骨架内部受力情况、抵抗荷载性能、应力传递性能等方面进行了对比和研究。结果表明:提出了利用X-ray CT断层图像扫描技术构建更接近于真实形态的集料颗粒模型的方法;骨架结构中较粗集料承受了主要的外力荷载作用;以典型的SMA-16级配为例,4.75~9.5 mm档集料是构成该级配集料骨架的关键粒径;骨架结构中细集料的增多有助于提高骨架的抗压强度,发生粗集料离析时,抗压强度将随着离析程度的加剧而显著地降低;不同的级配离析状态对混合料骨架结构的竖向与横向应力传递性能产生不同影响,其中细集料离析对应力传递性能的影响更大。     

某高速公路下边坡稳定性分析及支护方案研究

某高速公路K87+200~K87+320段下边坡高约52 m,边坡坡度约42°~54°,地质条件较复杂。基于理正软件采用瑞典条分法和基于Midas-GTS有限元仿真计算对该边坡的稳定性进行了分析,两种方法的计算得到的边坡滑动面位置和形状基本一致,瑞典条分法计算得到的安全系数为1.241,小于仿真计算的1.309,说明瑞典条分法相对保守。针对该边坡特征,提出完善排水系统+挂网锚喷的支护方案,并利用理正软件对支护后的边坡稳定进行计算,得到其安全系数为1.359>1.35,符合规范要求,说明边坡处于稳定状态。     

Artificial forces for virtual autonomous ships with encountering situations in restricted waters

ABSTRACT

Even if the same two ships operate in the same encountering situation, the actual strategies and timing of operations may be different. Therefore, the fixed collision avoidance trajectory and ship movements are no longer suitable for simulating the real ship behaviour. This paper tries to develop an artificial intelligent system that fully sensitive to the local circumstances and command a ship in virtual environment. Based on AIS (Automatic Identification System) data, this study has developed artificial forces which help decision makings on-board independently under different situations and catching the stochastic nature of ship behaviours during collision avoidances manoeuvring. Actual ship tracks are helpful for ascertaining the parameters that contribute to artificial forces in collision avoidances, while the correlation coefficient analysis is helpful to distinguish the parameters. This study will help to develop a navigation traffic simulation to reflect the realistic ship behaviour and provide reliable information for port and waterway planning, risk analysis, and mitigation measures. The method can be used in developing algorithms for autonomous ships. The method introduced in this study lays a foundation for developing artificial forces at intersections or bends, although the model is only applicable in straight channels at the moment.     

MTMD to increase fatigue life for OWT jacket structures using Powell's method

The Powell's method was developed to determine the optimal stiffness and damping of multi-tuned mass dampers (MTMD) in offshore wind turbine (OWT) support structures under fatigue loads. Numerical examples indicated that the Powell's method results are always better than those using MTMD formulations. With the exception of the blade passing (3P) frequency, it was found in this work that a positive integer (n) multiple of the 3P frequency will also result in a large wind-induced vibration, which can be excited by the frequency of the first structural vertical rotation mode and will cause significant fatigue damage. The first translation mode TMD installed at the tower top is efficient to increase fatigue life at the tower and brace connections, but it cannot reduce fatigue damage at the column and brace connections below the platform. The second translation mode TMD can reduce fatigue damage resulting from large wave loads and thus increase the fatigue life of the braces and columns. The mode-3 TMD with a reduction in the 3(3P) vertical rotation can effectively increase the fatigue life of the braces and columns. Thus, the appropriate use of these TMDs can be effective for the fatigue problem of OWT support structures.     

一种特殊的电机启动方式在混合动力船舶的应用

混合动力船舶越来越多,本文主要介绍在混合动力船舶中推进电机的一款特殊启动方法,不需要额外添加任何的启动器,利用主柴油机来启动推进电机达到混合推进的目的