AMT换挡品质的研究

电控机械式自动变速器（AMT）具有传动效率高、结构紧凑及工作可靠等优点。介绍了AMT换挡品质的定义及其影响因素，分析了几种影响因素之间的内在关系，并在此理论基础上寻求一种可获得最佳AMT换挡品质的方法。AMT按照其对发动机控制方式的不同，可分为柔性控制和刚性控制结构。     

汽车急加速噪声信号分析

汽车急加速噪声信号属于短时非平稳信号，在探讨各种时频分析方法的基础上，找到了一种适合于急加速噪声信号的处理方法——短时最大熵谱方法，这将有利于急加速噪声问题的进一步深入研究。     

电动摩托车功率匹配的研究

通过对电动摩托车行驶时各种阻力的分析,确定了其核心部件——电动机匹配的参数,并验证了其可行性。对相关的技术参数如电动机的额定转矩、额定转速、额定电流和摩托车的续驶路程等进行了计算和分析。     

电动助力转向系对汽车角输入响应影响的仿真

详细地分析和推导出了具有不同控制方式的EPS系统的传递函数，在Matlab环境中进行了仿真计算并对结果进行了分析，定性地说明了EPS系统的控制方式和结构参数对汽车转向盘角阶跃输入下的稳态、瞬态和频率响应特性的影响。     

低噪声电站噪声测量问题

分析了现实采用的几种移动电站噪声测量方法，根据实际发展需要。针对噪声测量中存在的一些问题，提出了低噪声电站噪声测量方法的一些看法。     

大跨度钢管混凝土拱桥地震反应分析

利用有限元法分析大跨度钢管混凝土拱桥的地震反应，考虑了剪切变形的影响，用子空间迭代法分析了其振动规律和动力特性，应用反应谱法和时程分析法分析了该拱桥的地震反应，得出了一些有价值的结论。     

钱江四桥抗震性能分析

根据钱江四桥地震危险性分析得到的地震动参数,基于两水准设防、两阶段设计的抗震设计思想,采用反应谱和时程分析两种方法对该桥的抗震性能进行了比较分析,分析时考虑了桩-土的相互作用及材料、伸缩缝、支座等非线形效应影响。研究结果表明:钱江四桥的抗震性能满足预期的设计性能目标,不会因地震而破坏。     

Greenhouse gas emissions from ships in ports – Case studies in four continents

Emissions of GHG from the transport sector and how to reduce them are major challenges for policy makers. The purpose of this paper is to analyse the level of greenhouse gas (GHG) emissions from ships while in port based on annual data from Port of Gothenburg, Port of Long Beach, Port of Osaka and Sydney Ports. Port call statistics including IMO number, ship name, berth number and time spent at berth for each ship call, were provided by each participating port. The IMO numbers were used to match each port call to ship specifications from the IHS database Sea-web. All data were analysed with a model developed by the IVL Swedish Environmental Research Institute for the purpose of quantifying GHG emissions (as CO₂-equivalent) from ships in the port area. Emissions from five operational modes are summed in order to account for ship operations in the different traffic areas. The model estimates total GHG emissions of 150,000, 240,000, 97,000, and 95,000 tonnes CO₂ equivalents per year for Gothenburg, Long Beach, Osaka, and Sydney, respectively. Four important emission-reduction measures are discussed: reduced speed in fairway channels, on-shore power supply, reduced turnaround time at berth and alternative fuels. It is argued that the potential to reduce emissions in a port area depends on how often a ship revisits a port: there it in general is easier to implement measures for high-frequent liners. Ships that call 10 times or less contribute significantly to emissions in all ports.     

第三轨供电系统中受流器与第三轨的接触压力及其对受流性能的影响分析

介绍了第三轨受流器的结构原理。分析比较了弹簧式和气压式受流器与第三轨接触压力调节方式的特点。基于电接触基本理论详细的阐述了受流滑板与第三轨接触区的导电机理。接触区域的导电电路由无数微小的电阻及电容并联而成,接触压力通过影响微小电阻、电容的数量比例,进而影响接触面上的导电能力和磨损性能。标称静态接触压力的设计值接近或等于"法向压应力临界值"时,导电能力和磨损特性取得均衡。     

Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.