Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

在用工业管道焊接缺陷的识别和自身高度的测量

在用工业管道定期检验划分安全状况等级时,须确定焊接缺陷性质和自身高度,当采用射线检测和超声检测时,缺陷具有不同的特征和自身高度的测量方法。通过分析射线检测和超声波检测,夹渣、未焊透、未熔合缺陷的识别方法和自身高度的测量,总结出根据缺陷的产生部位、缺陷的性质、缺陷的方向选择无损检测方法,综合运用射线检测技术和超声检测技术。     

海底柔性管道技术研究

随着海洋油气勘探开发的发展,柔性管道得到越来越广泛的应用。文中介绍了柔性管道的分类及结构,重点描述了粘结和无粘结柔性管道,无粘结柔性管道是目前国外发展趋势和研究重点。阐述了柔性管道的技术优势以及适用范围,同时介绍了柔性管道的发展状况、设计准则以及国外的主要制造厂商。国内柔性管道技术与世界先进水平之间还存在较大的差距,采用无粘结技术以及适用超深水环境将是国内未来深水海底柔性管道技术发展的方向。     

轴对称解对隧道衬砌水压力计算的适用性研究

文章根据渗流理论推导了隧道衬砌水压力的轴对称解,并利用数值分析方法研究了轴对称解对不同形状隧道断面与浅埋隧道的适用性.研究结果表明:轴对称解适用于非圆形隧道断面衬砌水压力的估算;隧道断面形状对衬砌水压力折减系数的影响较小,可以忽略不计,其影响大小主要由衬砌与围岩的渗透系数比值决定.对于浅埋低水头隧道,用轴对称解计算的毛洞流量Qm与数值解比较,其误差较大,最大误差为36.5％;但用来计算衬砌水压力p1以及衬砌后水流量Q1时,误差相对较小,最大误差为6.3％,特别是利用轴对称解得出的衬砌水压力值与利用数值解得出的衬砌水压力特征值最大误差仅为3.4％.     

基于Bayes判别分析方法的叙岭关隧道溶洞水源识别

基于Bayes判别方法,选取水化学常量组分作为判别指标,利用叙岭关隧道地区9个动态监测点的53个水样样本建立了该地区的水源判别模型.模型检验结果表明,其回判准确率为96.23％,具有较高的识别精度和工程推广能力.利用建立的判别模型,对叙岭关隧道1号溶洞内两个出水点RQ1和RQ2的水源进行了识别,并结合其流量动态变化特征、同位素分析结果,以及1号溶洞发育位置,推断1号溶洞内两个出水点的水源为P1m+q含水层中的岩溶地下水.根据判别结果,建议1号溶洞采取“以排为主”的原则加以处治,并尽量保留溶洞水的过水通道.     

偏压连拱隧道施工方法研究

文章采川三维有限元数值模拟研究了偏压连拱隧道不同施工顺序下拱顶下沉、中墙稳定性及初期支护受力特征.研究结果表明,先开挖浅埋侧时,拱顶沉降较小,中墙在施工中的稳定安全系数较大、弯矩较小,初期支护受力较大;对于浅埋偏压连拱隧道,围岩变形及中墙在施工中的稳定性控制更为重要.所以,从有利于围岩变形、中墙稳定性控制以及中墙受力的角度出发,宜采用先开挖浅埋侧的施工方法.     

基于船舶驾控测试系统的嵌入式车钟系统设计

针对船舶驾控设备类型多样的特点,提出一种基于船舶驾控测试系统的嵌入式车钟系统,对系统硬件组态进行布局,并结合软件,通过改变拨码盘状态,实现硬件和通信两种作业模式。该系统完成人员安全训练和设备开发功能,具有较高的应用价值。     

地下交通转换平台射流通风特性及风流组织方式研究

为探究地下交通转换平台内通风系统的合理布局,采用比尺模型试验和CFD模拟相结合的方法,研究射流风机和通风组织对地下交通转换平台内气流运动的影响。结果表明： 1）当联络通道内风机射流朝向敞开段时,为使风机升压系数Kj最大,630 mm、900 mm、1 120 mm射流风机的布设位置应距离敞开段分别大于40、50、65 m; 2）大口径射流风机具有更大的Kj,但占用的断面空间更大,且射流诱导段更长,应根据联络通道长度和高度合理选择射流风机口径; 3）地下交通转换平台的通风组织不宜采用同侧开启方式,采用对角抽吸方式时,联络通道内的污染物混入比最低、通风效率最高。