浅析城市道路设计中路线方案的比选——以兰州市南环路(西客站段)联通工程方案为例

城市道路建设过程中,存在各种不确定因素。当道路沿线构筑物较多、周边环境较为复杂时,需进行多方案的比选,在兼顾经济指标与技术指标的前提下确定切实可行的路线方案。结合兰州市南环路(西客站段)联通工程方案,总结了城市建设中路线方案比选的几点思考,供道路专业人员参考。     

Exploring the issue of integrating logistics and traffic control in urban areas

This paper proposes an optimization framework for urban transportation networks’ (re-)design which explicitly takes into account the specific decision-making processes of ordinary users and logistic operators. Ordinary users are typically commuters whose travels consist of well-defined pairs of origin and destination points, while logistic operators make deliveries at multiple locations. Obviously, these two user classes have different objectives and scopes of action. These differences are seldom considered in traffic research since most models aggregate the flow demand in OD matrices and use assignment models to predict the response of all users as if the dynamics of their optimization processes were of the same nature. This work demonstrates that better results can be achieved if the particular features of each user class are included in the models. It potentially improves the estimation of the responses and allows managers to shape their control measures to address specific user needs.     

A new generalized travel cost based connectivity metric applied to Scandinavian airports

This article proposes a new, generalized travel cost based method to operationalize network accessibility provided by airports. The approach is novel as it integrates features of network topology with multiple quality aspects of scheduled air transport services into one metric. The method estimates generalized travel costs for the full set of feasible travel paths between an airport and all network destinations. Rooftop modeling accounts for schedule delay and isolates the most cost-efficient travel paths per O-D relation. Respecting the assumed arrival time preference of passengers and adjusting for destination importance, connectivity scores are derived. The method is then applied to explore changes in the global connectivity pattern of Scandinavian airports from 2004 to 2018. The results suggest distinct spatial differences throughout the network, but less pronounced in size than suggested by popularly applied connectivity measures. Findings also highlight the importance of the geographical location as a determinate of an airport’s connectivity.     

Benefit of speed reduction for ships in different weather conditions

Currently, the shipping industry is facing a great challenge of reducing emissions. Reducing ship speeds will reduce the emissions in the immediate future with no additional infrastructure. However, a detailed investigation is required to verify the claim that a 10% speed reduction would lead to 19% fuel savings (Faber et al., 2012).This paper investigates fuel savings due to speed reduction using detailed modeling of ship performance. Three container ships, two bulk carriers, and one tanker, representative of the shipping fleet, have been designed. Voyages have been simulated by modeling calm water resistance, wave resistance, propulsion efficiency, and engine limits. Six ships have been simulated in various weather conditions at different speeds. Potential fuel savings have been estimated for a range of speed reductions in realistic weather.It is concluded that the common assumption of cubic speed-power relation can cause a significant error in the estimation of bunker consumption. Simulations in different seasons have revealed that fuel savings due to speed reduction are highly weather dependent. Therefore, a simple way to include the effect of weather in shipping transport models has been proposed.Speed reduction can lead to an increase in the number of ships to fulfill the transport demand. Therefore, the emission reduction potential of speed reduction strategy, after accounting for the additional ships, has been studied. Surprisingly, when the speed is reduced by 30%, fuel savings vary from 2% to 45% depending on ship type, size and weather conditions. Fuel savings further reduce when the auxiliary engines are considered.     

一种基于无人机倾斜摄影的三维路网提取方法

三维路网是重要的基础地理信息数据,为了快速高效地获取包括路网在内的地表三维模型,可以采用无人机倾斜摄影技术,并设计相应的三维路网提取方法。在对无人机倾斜摄影三维模型、道路特性分析的基础上,提出一种基于无人机倾斜摄影的三维路网提取方法。首先,对无人机倾斜摄影和三维建模方法进行了分析,设计了针对三维路网提取的航空摄影策略和数据处理流程。分析了真实三维模型的构成,并结合道路在材质、形态等方面的特殊性提出了可用于道路提取的三维模型特征。然后,以三维模型中的三角面片为处理对象,开展了相关分割方法研究,消除存在混合地物的面片。利用支持向量机方法和面片的多种特征,进行了道路面片识别。最后,设计了道路面片三维连接方法和道路边缘三维修正方法,实现了面片间的连接以及道路边缘的有效修正。此外,还以北京某地区为例开展实际数据采集、三维建模和三维路网提取试验,介绍了倾斜摄影、控制点验证点数据采集以及三维模型的采集和生产过程;利用所提出的方法进行路网提取试验,得到了该区域的三维路网数据成果,并从定性和定量2个角度对成果进行评价。试验结果表明：所提出的方法可以有效地从倾斜摄影三维模型上提取路网信息,其平面和高程的精度均可满足一般导航等应用的要求。     

废食用油预脱硫胶粉改性沥青组分与黏弹性研究（双语出版）

为研究废食用油预脱硫胶粉（WRO）对沥青组分及黏弹性的影响,在不同掺量、加工温度和加工时间下分别制备了15组废食用油预脱硫胶粉改性沥青（WROMA）。基于四组分试验、DSR时间扫描试验、多应力蠕变回复试验分析了沥青组分及黏弹性变化的规律。结果表明：在组分方面,WRO中的橡胶烃主要补充沥青质,油分大部分补充饱和分,少部分补充芳香分;加工工艺与改性沥青中饱和分和胶质的含量线性相关性较弱,与芳香分及沥青质的含量线性相关性很强,且芳香分与沥青质含量主要受WRO掺量影响。在黏弹性方面,WRO掺量增加,改性沥青高温黏性降低,弹性增加。为保证改性沥青获得足够的高温弹性,WRO最佳掺量为30%,加工温度为160℃、加工时间为2 h。综合组分与黏弹性的分析结果可知：芳香分是影响WROMA高温黏性的主导因素,其含量越高沥青黏性越明显;沥青质和WRO中的橡胶烃是影响WROMA高温弹性的主导因素,两者含量越高,改性沥青弹性越明显。     

Using GPS-data to determine optimum electric vehicle ranges: A Michigan case study

Fuel-switching personal transportation from gasoline to electricity offers many advantages, including lower noise, zero local air pollution, and petroleum-independence. But alleviations of greenhouse gas (GHG) emissions are more nuanced, due to many factors, including the car’s battery range. We use GPS-based trip data to determine use type-specific, GHG-optimized ranges. The dataset comprises 412 cars and 384,869 individual trips in Ann Arbor, Michigan, USA. We use previously developed algorithms to determine driver types, such as using the car to commute or not. Calibrating an existing life cycle GHG model to a forecast, low-carbon grid for Ann Arbor, we find that the optimum range varies not only with the drive train architecture (plugin-hybrid versus battery-only) and charging technology (fast versus slow) but also with the driver type. Across the 108 scenarios we investigated, the range that yields lowest GHG varies from 65 km (55+ year old drivers, ultrafast charging, plugin-hybrid) to 158 km (16–34 year old drivers, overnight charging, battery-only). The optimum GHG reduction that electric cars offer – here conservatively measured versus gasoline-only hybrid cars – is fairly stable, between 29% (16–34 year old drivers, overnight charging, battery-only) and 46% (commuters, ultrafast charging, plugin-hybrid). The electrification of total distances is between 66% and 86%. However, if cars do not have the optimum range, these metrics drop substantially. We conclude that matching the range to drivers’ typical trip distances, charging technology, and drivetrain is a crucial pre-requisite for electric vehicles to achieve their highest potential to reduce GHG emissions in personal transportation.     

基于砾钢渣+橡胶颗粒的新型填料动剪切模量与阻尼比特性试验

为了解决固体废弃物循环利用问题,提出将废旧轮胎橡胶颗粒掺入废弃钢渣中形成新型土工填料。为了了解该新型填料的动力特性,采用共振柱试验对基于钢渣+橡胶颗粒的新型土工填料的动剪切模量和阻尼比特性开展研究。首先分析围压与橡胶颗粒含量对新型填料动剪切模量和阻尼比的影响,试验结果表明：动剪切模量和阻尼比与剪应变的关系类似传统土类,动剪切模量随着剪应变的增大而减小,阻尼比则随着剪应变的增加而增大,变化曲线趋势基本一致;新型填料的动剪切模量随着钢渣含量的减少和橡胶颗粒含量的增加而逐渐减小,橡胶颗粒含量达到20%时,动剪切模量与剪应变的关系曲线低缓显著,新型填料中橡胶颗粒不宜掺入太多。然后,基于Hardin-drnevich双曲线模型建立新型填料的动力特性理论模型,Hardin-drnevich双曲线模型能够较好地模拟新型填料动剪切模量归一化的数据,并对新型填料参考剪应变随橡胶含量的变化趋势进行了预测。最后,将新型填料的最大动剪切模量与纯钢渣、南京砂和福建标准砂的最大动剪切模量进行比较。分析结果表明：新型填料的橡胶颗粒含量不宜超出15%,这种新型填料动剪切模量适中,阻尼比较大,具有较好的抗震减震能力,能够替代砂土成为一种回填材料。     

基于Bodner-Partom模型的水泥乳化沥青混合料黏弹塑压实特性

为揭示水泥乳化沥青混合料压实过程中的黏弹塑性变形特性及其变形机理,结合现场路面压路机的施工工艺参数,采用万能试验机压缩试验模拟该混合料的压实过程。针对试验循环荷载力学响应曲线变形特征,引入有效平均应力构建混合料压实变形的Bodner-Partom本构模型。通过对应变-时间的非线性拟合识别出该混合料的B-P模型参数值,进而揭示压实过程中混合料的黏弹塑性动态流变特性及变形机理。试验结果表明：压缩试验可充分反映混合料压实过程中的力学响应变形特性;随着循环荷载次数的增加,混合料塑性和黏塑性变形减小而弹性和黏弹性变形增大。据混合料复压阶段的黏塑性变形规律导出试样空隙率的计算式,进而获得有效平均应力随试样空隙率的变化规律。B-P本构模型分析结果表明：黏性参数η随荷载作用次数的增加而逐渐增大,说明混合料在压实过程中黏性增强;应变率敏感系数n₁基本保持不变,表明压实过程中混合料温度相对稳定;参数值Z,D₀随荷载作用次数的增加分别呈递增、递减的规律,前者显示随着混合料被进一步压实其非弹性变形抵抗力增大,进而导致塑性和黏塑性应变逐渐减小,后者显示塑性应变率减小,表明单次循环荷载下塑性变形占总变形量的比例逐渐减小。B-P模型参数值可准确表征水泥乳化沥青混合料与时间和荷载相关的黏弹塑性流变特性,重构后的B-P本构模型可有效揭示混合料压实过程中的黏弹塑性变形机理,可为深入研究其压实流变性能和路面压实工艺奠定基础。     

中心城区路网优化策略研究 ——以沧州市为例

为解决中心城区道路拥堵问题,分析了城区交通拥堵形成的主要原因,并基于此提出中心城区路网优化策略。以沧州市中心城区为例,详细阐述了其路网优化设计的基本思路和路网布局,最终得出沧州市中心城区路网优化设计方案。