结构物外观质量的影响因素及控制措施

影响结构物混凝土外观质量的因素是多方面的，控制措施也在不断完善。良好的外观质量带给人们的视觉美感．已经成为工程建设者们不懈追求的目标。     

超声波检测在钢管砼桥梁施工质量控制中的作用

在钢管砼桥梁中,钢管内砼的压注质量是保证桥梁总体质量的关键.通过超声波检测的原理和方法的介绍,以合阳嘉陵江大桥利用超声波检测确定出主弦管内砼的质量问题,有针对性地进行整改的工程实例,阐述了超声波检测在钢管砼桥梁质量控制中的重要地位和作用.     

统计过程控制SPC在ERP质量管理中的应用研究

统计过程控制(SPC)是实现质量管理与控制的重要组成内容.在对SPC及其控制图进行基本阐述的基础上,结合企业ERP系统,在分析质量管理系统的功能模块后,将SPC技术与ERP质量管理系统进行了有效结合,并从受控质量特性选择和数据获取、控制图及其诊断以及工序能力指数等方面进行了深入研究和分析,给出了应用实例.该系统已经在企业得到很好的应用.     

����ATMS������Ϣƽ̨�� ����Ԥ���������о�

对面向ATMS共用信息平台的数据预处理技术进行了探讨.介绍了面向ATMS的共用信息平台的含义以及作用，探讨了面向ATMS共用信息平台的数据预处理技术，从故障识别，故障修复来对动态交通数据预处理方法进行了研究.该研究对于面向ATMS共用信息平台数据预处理提供了依据.     

船用燃气轮机发电机组动态性能仿真

基于Matlab/Simulink平台,根据容积惯性法建立某三轴燃气轮机发电机组非线性动态模型,并定制燃气轮机转速调节及发电机励磁系统控制策略,对动态模型进行阶跃形突增突减负荷变工况仿真研究。结果表明动态模型能够有效地对负荷突变工况进行模拟,为船舶电网供电模块的控制系统设计与优化提供模型基础;在变工况过渡过程中,燃气轮机发电机组动态响应特性满足船舶电网供电品质要求。     

重力式码头通病的应对措施

由于重力式码头结构的大型化,重力式码头结构在不同部位出现了不同程度的质量通病,例如胸墙裂缝、工后沉降位移及码头面层不均匀沉降造成后方积水等,严重影响码头的正常使用。结合重力式码头设计施工经验,分析质量通病的形成机理及其危害,并提出解决措施。这些措施经实践证明可行有效,可为类似工程提供借鉴。     

Measuring the influence of bus service quality on the perception of users

Encouraging the use of public transport is a key policy goal in many countries. Therefore, public transport should offer the level of quality that accommodates the demands of current users, and importantly, the desires of potential users. This study investigates the influence of the perceived quality of bus service on the perception of both current and potential users. The study draws upon data from 512 questionnaires distributed across Belfast City in the UK. The study utilises a binary logistic regression model to quantify the relationships between the perceived quality of 29 bus indicators (independent) and the perceptions of users towards the overall bus service (dependent). Eleven significant indicators are reported to have significant influence on the perception of users. These indicators are utilised to propose scenarios for optimising the quality of bus service with the perceptions of current and potential users.     

The influence of bus service satisfaction on university students' mode choice

The purpose of this study was to determine the relationship between bus service satisfaction and the transport mode of choice among university students in Qatar. The degree of bus service satisfaction was collected directly from questionnaire surveys, in which university students were asked questions in relation to their satisfaction with the bus service they used and their transport mode of choice. These questions were categorized into three factors according to confirmatory factor analysis: service at bus stops, service of busses, and service of drivers. Furthermore, the students were asked which mode of transport they used given the choice between public and private transport. This study presents a structural equation model to determine how much bus service satisfaction affects people's decisions about their transport mode. The results from the analysis showed that three key factors—namely, service at bus stops, service of busses, and service of bus drivers—were strongly correlated to the mode of choice. In particular, the bus stop was strongly associated with ease of use, shade, cleanliness, safety, and crowdedness level, while the bus itself influenced reliability, travel time, and frequency. Complying with traffic laws and the driver's attitude were also important contributors to the level of bus service satisfaction. Ultimately, this study will be beneficial for policy/decision‐makers. It will allow them to determine what needs to be accomplished to encourage people to use public transportation. Copyright © 2016 John Wiley & Sons, Ltd.     

高压共轨喷油器压力波动与针阀响应解耦分析

多次喷射过程中,不同喷射之间的相互影响导致循环喷油量的控制难度增大。建立了高压共轨系统的AMESim仿真模型,通过数值仿真和试验测试相结合的方法,揭示了喷油器内部压力波动和针阀开启阶段动作响应的强耦合作用是导致主喷油量随喷射间隔波动的根本原因,当主喷油量基准值为60．0 mm3时,其波动量最大可达3．6 mm3。建立了共轨系统的无阻尼 L C液力系统模型,通过对模型的分析,针对强耦合作用提出了减小喷油器内部油道长径比和盛油槽容积的解耦方法。对解耦方法的仿真试验验证表明,采用解耦方法后压力波动和针阀响应的耦合程度降低53％。     

基于不同燃油品质的内河船舶排放特性试验研究

采用车载排放测试系统,对某内河船舶于苏州河某航段进行了分别燃用B0（纯石化柴油）和B10（生物柴油-柴油混合燃料,生物柴油体积比10%）的实船放对比试验,探究了燃油品质对内河船舶PN（颗粒物数量）、CO、THC和NOX排放的影响,结果表明：○1内河船舶燃用B0和B10时的PN随粒径分布相似,在离港、进港和低负荷工况时呈双峰对数分布,在巡航及中、高负荷工况时呈单峰对数分布;○2内河船舶燃用B0和B10时,PN、THC、NOX排放均随负荷变大而升高,而CO排放则先降低后升高;○3相对B0,内河船舶燃用B10时PN、CO排放下降、THC和NOX排放上升,离港、巡航、进港时PN排放因子分别降低13.82%、8.21%、46.44%,CO排放因子分别降低20.87%、34.75%、17.60%, THC排放因子分别升高33.68%、26.00%、14.15%,NOX排放因子分别升高1.33%、13.92%、8.93%。