悬挂式单轨平面圆曲线乘客舒适度控制标准取值研究

乘客舒适度标准是确定线路平纵断面设计参数最为重要的控制指标,也是必须满足的强制性指标。为合理平衡乘客舒适度与工程建设成本之间的跷跷板关系,通过系统总结国内外各种现有制式取值标准,就悬挂式单轨乘客舒适度控制标准取值开展理论分析研究,并提出相应建议。与平面圆曲线半径相关的乘客舒适度指标为车体偏转角及未被平衡离心加速度,随着偏转角和未被平衡离心加速度数值的增加,其对最小圆曲线半径的影响逐渐减弱,恶化舒适度条件并不完全等同于工程效益的减小。悬挂式单轨最大偏转角理论上可突破传统轮轨铁路7.7°的限制,但增大偏转角对限界造成的影响不可忽略。人体可忍受的振动持续作用时间与未被平衡离心加速度大小成反比,将加速度控制在0.4～0.8 m/s~2是合理的。     

冲压机械振动对高铁桥梁及行车动力影响分析

高速铁路桥梁的平顺性和稳定性对运营列车的平稳性和安全性有很大影响。为研究冲压机械产生的外部振动激励对高铁桥梁的影响,首先通过对此机械引起的地面振动进行实测,并结合有限元分析软件,确定最大冲击荷载作用下产生的地面振动及传播至桥墩处的振动;然后通过建立列车-轨道-桥梁耦合动力学模型,将桥墩处的地面振动作为激励输入,分析列车以不同速度通过时车辆、桥梁动力学响应。结果表明:地面冲击振动有限元模型计算结果与实测结果基本相符,验证了模型的可靠性;地面振动对桥梁响应会产生一定的影响,距振源50 m处地面振动对桥梁所产生的影响较距振源80 m处(桥墩处)的大,但对运行车辆的影响很小;随着车速由250 km/h至350 km/h,车辆及桥梁各结构的动态响应均有所增大,但都未超出安全限值。因此,冲压机械冲击作用导致的地面振动对列车-轨道-桥梁系统动态服役性能影响非常有限。     

爆炸硬化高锰钢组合辙叉水平裂纹伤损分析

爆炸硬化高锰钢组合辙叉是近几年针对重载铁路使用条件开发的一种新型固定型辙叉产品,在批量上道使用后,水平裂纹伤损发生频次逐渐增加,引起广泛的关注。对水平裂纹伤损产生的原因进行分析,并提出多项改进措施。通过改进措施的实施,在朔黄线取得了较好的改进效果。实际结果表明,通过不断改进工艺、提高质量、加强维护,爆炸硬化高锰钢组合辙叉能够实现通过总重3亿t以上的目标。     

考虑空车调配协调的货物列车开行方案优化研究

为实现空车调配与货物列车开行方案协调优化，结合基本运行图架构与车流径路，构建货运时空服务拓展网络。考虑配空与装卸取送、集编发等环节的时间接续要求，节点与区段不对流空车要求，以重车流全程运送与空车配送等广义总费用最少为目标，建立整数规划弧路模型。针对既有算法设计局限性，结合重车或空车配空的时间接续要求，提出将不同的 k 短路重车流方案与空车配空方案相关联的改进可行解构造方法，设计混合差分进化求解算法。实例研究表明，考虑空车调配进行重车、空车流组织协调优化，能够减少空车走行费用，及时满足装车需求，有效保证作业车流配合中转车流集结编组及时挂线，提高方案可实施性。     

汉巴南铁路兰渝联络线电分相设置方案研究

联络线电分相设置方案影响因素众多,且其设置与否对工程和运营的影响也较大。本文对汉巴南铁路兰渝联络线电分相设置方案进行研究,提出高速铁路设置关节式电分相联络线最短长度;对联络线电分相不同设置方案进行比选研究,并结合各方案的土建工程、信号系统、供电系统及限制因素提出布局优化措施,以期为联络线电分相合理设置与优化布局提供新思路。     

桥梁转体施工自闭合式合龙钢壳系统及施工技术研究

为进一步减小转体施工桥梁合龙施工时对既有运营线路的干扰,同时解决传统钢壳法中加劲肋板对合龙段施工的影响,以首座采用墩中转体的大树村龙川江三线大桥为依托,在传统钢壳法的基础上进行优化研究,自行研制、设计了一套自闭合式合龙钢壳系统并应用于实践,最终达到了安全、优质、快速、有序合龙的目的。实践结果表明,自闭合式合龙钢壳系统能够满足施工要求,且使用效果良好,达到了优化施工的目的,可为类似桥梁合龙施工提供参考。     

Integrating capacity analysis with high-speed railway timetabling: A minimum cycle time calculation model with flexible overtaking constraints and intelligent enumeration

Compared with most optimization methods for capacity evaluation, integrating capacity analysis with timetabling can reveal the types of train line plans and operating rules that have a positive influence on improving capacity utilization as well as yielding more accurate analyses. For most capacity analyses and cyclic timetabling methods, the cycle time is a constant (e.g., one or two hours). In this paper, we propose a minimum cycle time calculation (MCTC) model based on the periodic event scheduling problem (PESP) for a given train line plan, which is promising for macroscopic train timetabling and capacity analysis. In accordance with train operating rules, a non-collision constraint and a series of flexible overtaking constraints (FOCs) are constructed based on variations of the original binary variables in the PESP. Because of the complexity of the PESP, an iterative approximation (IA) method for integration with the CPLEX solver is proposed. Finally, two hypothetical cases are considered to analyze railway capacity, and several influencing factors are studied, including train regularity, train speed, line plan specifications (train stops), overtaking and train heterogeneity. The MCTC model and IA method are used to test a real-world case involving the timetable of the Beijing–Shanghai high-speed railway in China.     

Balancing energy consumption and risk of delay in high speed trains: A three-objective real-time eco-driving algorithm with fuzzy parameters

Eco-driving is an energy efficient traffic operation measure that may lead to important energy savings in high speed railway lines. When a delay arises in real time, it is necessary to recalculate an optimal driving that must be energy efficient and computationally efficient.In addition, it is important that the algorithm includes the existing uncertainty associated with the manual execution of the driving parameters and with the possible future traffic disturbances that could lead to new delays.This paper proposes a new algorithm to be executed in real time, which models the uncertainty in manual driving by means of fuzzy numbers. It is a multi-objective optimization algorithm that includes the classical objectives in literature, running time and energy consumption, and as well a newly defined objective, the risk of delay in arrival. The risk of delay in arrival measure is based on the evolution of the time margin of the train up to destination.The proposed approach is a dynamic algorithm designed to improve the computational time. The optimal Pareto front is continuously tracked during the train travel, and a new set of driving commands is selected and presented to the driver when a delay is detected.The algorithm evaluates the 3 objectives of each solution using a detailed simulator of high speed trains to ensure that solutions are realistic, accurate and applicable by the driver. The use of this algorithm provides energy savings and, in addition, it permits railway operators to balance energy consumption and risk of delays in arrival. This way, the energy performance of the system is improved without degrading the quality of the service.     

铁路货物追踪系统的构建

铁路货物运输组织是铁路工作的一个核心内容,铁路货物追踪系统的设计与实现能够为货主提供更好、更快的服务,同时加快和保障铁路货运工作的组织。通过对铁路整车货物运输的流程分析,制定货物追踪系统的目标,分析系统功能。通过数据的采集和信息共享平台的建立,提出货物追踪系统的实现途径。     

乾元公司铁路专用线场站模式探讨

目前,传统的铁路专用线建设模式是铁路专用线自接轨站接轨,通过区间正线引入厂区的建设模式,这种模式的区间正线受地形条件、厂区位置和沿线规划影响较大,这些影响将不可避免地导致铁路专用线建设工程投资的增加,如能根据运输性质考虑缩短区间正线长度,在接轨站旁边设装车作业站,将大大减少专用线工程投资.以乾元公司铁路专用线建设模式为例来研究铁路专用线场站模式,就如何在接轨站旁边设装车作业站,实现接轨站设备与铁路专用线共用进行探讨.