液压机械无级传动系统综合控制策略研究

拟合出了发动机稳态输出转矩模型和燃油消耗率模型,给出了发动机最佳动力性和最佳燃油经济性的目标速比。在此基础上建立了液压机械无级变速传动系统和发动机的综合控制方案,给出了相应的油门-速比综合控制策略框图。最后应用Matlab/Simulink软件建立系统仿真模型对其进行仿真分析,仿真结果表明:所设计的综合控制策略能够实现最佳动力性和最佳燃油经济性控制。     

基于PLC和变频器的船舶机舱风机调速系统设计

在分析船舶机舱风机变频调速原理和节能效果的基础上,介绍了基于PLC和变频器的船舶机舱风机调速系统的变频控制设计方案.     

Vertical random vibration analysis of vehicle–track coupled system using Green's function method

A vertical vehicle–track coupled dynamic model, consisting of a high-speed train on a continuously supported rail, is established in the frequency-domain. The solution is obtained efficiently by use of the Green's function method, which can determine the vibration response over a wide range of frequency without any limitations due to modal truncation. Moreover, real track irregularity spectra can be used conveniently as input. The effect of the flexibility of both track and car body on the entire vehicle–track coupled dynamic response is investigated. A multi-body model of a vehicle with either rigid or flexible car body is defined running on three kinds of track: a rigid rail, a track stiffness model and a Timoshenko beam model. The results show that neglecting the track flexibility leads to an overestimation of both the contact force and the whole vehicle vibration response. The car body flexibility affects the ride quality of the vehicle and the coupling through the track and can be significant in certain frequency ranges. Finally, the effect of railpad and ballast stiffness on the vehicle–track coupled vibration is analysed, indicating that the stiffness of the railpad has an influence on the system in a higher frequency range than the ballast.     

Speed variation during peak and off-peak hours on urban arterials in Shanghai

Increased speed variation on urban arterials is associated with reductions in both operational performance and safety. Traffic flow, mean speed, traffic control parameters and geometric design features are known to affect speed variation. An exploratory study of the relationships among these variables could provide a foundation for improving the operational and safety performance of urban arterials, however, such a study has been hampered by problems in measuring speeds. The measurement of speed has traditionally been accomplished using spot speed collection methods such as radar, laser and loop detectors. These methods can cover only limited locations, and consequently are not able to capture speed distributions along an entire network, or even throughout any single road segment. In Shanghai, it is possible to acquire the speed distribution of any roadway segment, over any period of interest, by capturing data from Shanghai’s 50,000+ taxis equipped with Global Positional Systems (GPS). These data, hereafter called Floating Car Data, were used to calculate mean speed and speed variation on 234 road segments from eight urban arterials in downtown Shanghai. Hierarchical models with random variables were developed to account for spatial correlations among segments within each arterial and heterogeneities among arterials. Considering that traffic demand changes throughout the day, AM peak, Noon off-peak, and PM peak hours were studied separately. Results showed that increases in number of lanes and number of access points, the presence of bus stops and increases in mean speed were all associated with increased speed variation, and that increases in traffic volume and traffic signal green times were associated with reduced speed variation. These findings can be used by engineers to minimize speed differences during the road network planning stage and continuing through the traffic management phase.     

Incorporating Driver Behaviors in Network Design Problems: Challenges and Opportunities

The goal of a network design problem (NDP) is to make optimal decisions to achieve a certain objective such as minimizing total travel time or maximizing tolls collected in the network. A critical component to NDP is how travelers make their route choices. Researchers in transportation have adopted human decision theories to describe more accurate route choice behaviors. In this paper, we review the NDP with various route choice models: the random utility model (RUM), random regret-minimization (RRM) model, bounded rationality (BR), cumulative prospect theory (CPT), the fuzzy logic model (FLM) and dynamic learning models. Moreover, we identify challenges in applying behavioral route choice models to NDP and opportunities for future research.     

高速公路大型门架式可变情报板（LED）系统探析

通过介绍可变情报板的系统构成、功能、原理，以促进其推广和应用，从而更好地为高速公路安全、高速和畅通的运行提供保障。     

地铁车站结构随机振动响应分析

基于地震反应的随机非确定性,运用基于概率统计方法的随机振动理论进行结构抗震分析,考察结构的动力可靠度,是一种合理的设计方法。运用虚拟激励法对青岛地铁五四广场站进行随机振动分析,避免了传统方法计算的冗繁,得到了具有统计意义的结构动力响应。考虑x向功率谱输入时,弯矩分布较为均匀;地铁结构体型变化较大的部位剪力明显增大;柱底剪力较小,边跨柱剪力小于中跨柱底剪力。考虑y向功率谱函数输入时,沿梁轴向剪力值逐渐增大,柱底剪力明显大于x向输入时的柱底剪力,边跨柱柱底剪力大于中跨柱底剪力。所得结论为地铁站这一复杂结构形式进行基于可靠度理论的设计提供了依据,可以作为同类设计的参考指导。     

公路规划环评中公众参与框架的设计与实施评价

论文分析了环境影响评价中公众参与的现状和国内外发展的状况以及目前存在的问题，对公众参与在环境影响评价中应用的意义和作用进行了探讨，根据公路规划的特点和环境影响提出了提高公众参与有效性的原则和实施框架，建立了对公众参与过程进行评价的模糊综合评价方法和变权评价方法。研究结果对规范公路规划环评中的公众参与以及保证公众参与的有效实施具有现实意义。     

考虑渗透性变化时的充填粘土袋工程固结分析

充填粘土袋工程的固结过程中,充填土体的渗透性变化较大。利用非线性Biot固结理论,建立了考虑固结过程中土体渗透性变化的固结分析方法。利用该法对设计的某充填粘土袋围堰固结过程进行模拟分析对比。结果表明:考虑渗透性变化时其固结速度远快于不考虑渗透性变化时的固结速度。因此在充填粘土袋工程的固结变形中考虑其渗透性变化是非常必要的。