不等高接触悬挂在同一组软横跨上的处理方案

针对株洲客车站北咽喉第5次提速改造和兼顾浙赣线引入线接触线高度6450mm改造的特殊要求,通过分析比较不等高接触悬挂在软横跨上的处理模式,提出经济合理、高效便捷的处理方案,为今后此类施工提供借鉴。     

A high order linear model for the prediction of internal lee waves at the main sill of the Strait of Gibraltar

A linear theory for the physical fields in the water column under the action of large amplitude internal lee waves at the main sill of the Strait of Gibraltar is developed. The procedure is a combination of the perturbation and normal modes methods in order to study steady resonant conditions. The lowest order linear approach of the methodology resumes the Taylor–Goldstein equation, which can reconstruct the main features of the observed fields but the high order approach gives the finest structure and sometimes the largest contributions. The role of the non-linear terms is investigated up to the second order taking into account the non-linear interactions between modes, leading to an effective reconstruction of the whole water column for the velocity field.     

高速公路路堤填土工程适宜性评价方法的探讨

路堤填筑是高速公路路基工程的一个重要环节，路堤填土工程适宜性研究尤为重要，基于高速公路路堤填土工程性质的分析，提出了填土工程适宜性评价的一种方法，分析了其可行性和难点，以广东西部沿海高速公路某试验段为例，进行了工程适宜性评价。这将对高速公路路基施工提供新的理论依据。     

揭阳市东山区沟口村民房墙体开裂问题研究

相邻建筑物在地基中产生的沉降总是相互影响,需要从新旧建筑物的强度、刚度、结构类型、地质情况、荷载大小等方面进行分析,从而提出对不同类型结构的处理方法。     

论海运提单的运输合同属性

通过提单的历史演变及有关立法及业务实际程序考察,论述提单的运输合同属性,更正有关立法的误会。     

市政道路排水系统简介及其施工方法

简单地介绍了市政道路的排水系统并详细地介绍了道路施工经常接触的排水部位的施工方法及质量问题的原因分析、控制措施。     

新型码头钢-混凝土组合面板

基于特殊需要,提出了带型钢加劲肋的钢板-混凝土组合板这一新型组合码头面板。以加劲肋形式、组合板厚度和栓钉布置为参数,进行了9块组合板的力学性能试验。试验结果表明,通过适当地选择型钢加劲肋形式、合理地布置栓钉和确定混凝土厚度,可以保证组合作用的发挥。组合板的正截面承载力可按基于修正平截面假定的极限状态计算;组合板的变形,可在按现行钢结构设计规范计算的基础上,加上考虑界面滑移影响的附加变形值予以修正。计算值与试验值吻合较好。     

Distribution of suspended sediment in the coastal sea off the Ganges–Brahmaputra River mouth: observation from TM data

Remote sensing technique was applied to estimate suspended sediment concentration (SSC) and to understand transportation, distribution and deposition of suspended sediment in the estuary and throughout the coastal sea, off the Ganges–Brahmaputra River mouth. During low river discharge period, zone of turbidity maximum is inferred in the estuary near the shore. SSC map shows that maximum SSC reaches 1050 mg/l in this period. Magnitude of SSC is mainly owing to resuspension of the bottom surface sediments induced by tidal currents flowing over shallow water depths. The influence of depth on resuspension is farther revealed from the distribution and magnitude of SSC along the head of Swatch of No Ground (SNG) submarine canyon. During high river discharge period, huge river outflow pushed the salt wedge and flashes away the suspended sediments in the coastal sea off the river mouth. Zone of turbidity maximum is inferred in the coastal water approximately within 5–10 m depth of water, where the maximum SSC reaches 1700 mg/l. In this period, huge fluvial input of the suspended sediments including the resuspended bottom sediments and the particles remaining in suspension for longer period of time since their initial entry control mainly the magnitude of SSC. In the estuary near the shore, seasonal variation in the magnitude of SSC is not evident. In the coastal sea (>5 m water depth), seasonal influence in the magnitude of SSC could be concluded from the discrepancy between SSC values of two different seasons. Transportation and deposition of suspended sediments also experiences seasonal variations. At present, suspended sediments are being accumulated on the shallow shelf (between 5 and 10 m water depth) in low discharge period and on the mid-shelf (between 10 and 75 m water depth) during high discharge period. An empirical (exponential) relationship was found between gradual settle down of suspended sediments in the coastal sea and its lateral distance from the turbidity maximum.     

基于层次灰色模型的铁路技术创新绩效综合评价

运用技术创新基本理论,结合铁路技术创新实际,从效益(经济、社会)增长、市场状态(市场份额、市场营销)改善和创新主体素质(技术装备水平、管理水平)提高3个方面建立了评价铁路技术创新绩效的多级指标体系。将层次分析法(AHP)和灰色系统理论结合起来建立了层次灰色评价模型(HGM),运用该模型对铁路技术创新绩效分别从整体和分项进行了综合评价,得出:铁路技术创新绩效绩优度为“一般”,其主要原因在于铁路运输市场状态改善中市场份额扩大程度较低。实证分析结果表明:改进层次灰色评价法(层次灰色评价模型)为一种评价铁路技术创新绩效的有效方法。     

变压器换位导线股间短路点的查找与排除

变压器线圈制造过程中经常出现换位(组合)导线有股间短路现象,如何查找短路点并且有效地排除故障显得很重要。本文介绍目前常用的几种短路点的查找和排除方法。