一种确定高圆簧横向刚度的有效方法

文中将高圆簧简化为等截面弹性直杆，导出高圆簧横向刚度计算式，并用试验结果进行修正，提出高圆横向刚度分析方法。理论分析和试验结果表明：高圆簧横向刚度的大小取愉于高圆簧的自由高度和工作高度，即由其结构几何参数和工作载荷决定。按文中方法确定的高圆簧横向刚度理论值与试验结果间的最大误差不超过１０％，满足工程理论分析要求。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

基于隧道检测钢筋分布不均状况下判定衬砌结构安全性应用研究

近年来隧道内出现的越来越多的质量安全事故,引起各方高度重视,相应的最适宜隧道主体工程衬砌质量控制的地质雷达无损检测方法被广泛应用。通过雷达无损检测可揭露出衬砌内欠厚、脱空、钢筋分布不均等大量各类型缺陷,针对欠厚脱空等缺陷制定的注浆或开窗等治理措施是目前工程中常见的整改闭合工序,但钢筋分布不均对结构安全影响如何判定,怎么界定处理尚无成熟方案与规定。本文针对隧道项目中实际检测出的钢筋分布不均缺陷,在不宜大范围扰动结构及围岩进行整治的情况下,以及在避免其他问题共存等不利因素的前提下,应用有限元数值模拟计算分析强度安全系数,并结合现场外观等综合因素对衬砌结构安全性进行分析判定研究。     

Optimal placement of omnidirectional sensors in a transportation network for effective emergency response and crash characterization

Rapid motor vehicle crash detection and characterization is possible through the use of Intelligent Transportation Systems (ITS) and sensors are an integral part of any ITS system. The major focus of this paper is on developing optimal placement of accident detecting omnidirectional sensors to maximize incident detection capabilities and provide ample opportunities for data fusion and crash characterization. Both omnidirectional sensors (placed in suitable infrastructure locations) and mobile sensors are part of our analysis. The surrogates used are acoustic sensors (omnidirectional) and Advanced Automated Crash Notification (AACN) sensors (mobile). This data fusion rich placement is achieved through a hybrid optimization model comprising of an explicit–implicit coverage model followed by an evaluation and local search optimization using simulation. The compound explicit–implicit model delivers good initial solutions and improves the detection and data fusion capabilities compared to the explicit model alone. The results of the studies conducted quantify the use of a data fusion capable environment in crash detection scenarios, and the simulation tool developed helps a decision maker evaluate sensor placement strategy.     

预应力锚索边坡加固设计、施工技术

介绍了吉林长晖公路K115 530～K116 176处高边坡的不良地质情况及对该高边坡采取的加固措施,重点介绍了新型压力分散型预应力锚索加固高边坡的机理、施工工艺及锚索测试试验技术,可供同行们在处理同类型问题时参考.     

某商用车散热器面罩开裂分析与改进

为解决散热器面罩开裂问题,提出了焊点优化方案和散热器面罩加强板外置/加强板内置方案,并进行了模块化设计,制定了2组改进措施。有限元分析结果表明:2种改进措施与原状态相比,均有良好应力改善效果,满足应力要求。     

简支变连续梁法加固多跨T梁桥效应分析

多跨简支T梁变连续加固措施是多跨简支T梁桥加固改造、提高承载能力的行之有效的方法.但实践中发现该方法存在着一定的问题.以跨径为16.76m+16.76m的两跨简支T梁为例,通过理论分析计算表明,该方法在提高跨中抗弯承载能力的同时,却降低了中间支点处梁的抗剪承载能力.建议在采用此方法加固多跨简支T梁的同时应对中间支点梁的抗剪能力进行加固.     

交通拥挤收费应用实施的研究

交通拥挤收费不仅能缓解交通拥挤,还能通过收费使交通基础设施获得建设维护的部分资金,其合理性和必要性已经得到充分的论证,然而对于实施的一些基本问题,认识的还很不充分,也就对拥挤收费的实施造成了一些基本障碍。从交通拥挤收费实施的基本原则出发,对收费的基本方式、收费实施的影响因素和实施的策略等方面进行了研究,认识到交通拥挤收费不仅仅是一个技术性的问题,更是一个牵涉到政治、经济、文化和民众心理的问题,因此在实施的过程中必须考虑到收费的公平性、效益性和可持续性。在此基础上,对于目前我国一些城市实施交通拥挤收费的措施提出了一些中肯建议。     

中英思维模式差异对英汉学术论文写作的影响

探讨了中英语篇思维模式差异对英汉学术论文写作中论证方法的影响问题.文章通过分析指出,中英思维模式存在着直觉与抽象、本体与客体和螺旋与直线型差异,并因此导致英汉学术论文中论证方法在修辞手段、引经据典、引用权威等方面的使用差异.文章最后指出,只有了解英汉思维模式的差异,分析其文化成因,才能真正实现跨文化写作的成功.     

基于电动出租车数据的充电桩选址聚类方法比较

为有效降低出租车运营企业及经营者的经济成本,通过分析出租车的卫星轨迹数据,比较和选取用于电动出租车充电桩选址规划的聚类方法。以上海市电动出租车充电站的选址规划为研究对象,分别基于孤立森林和聚类算法设计异常值检测方法,对相关时段的出租车卫星数据进行清理以及数据可视化处理;比较层次聚类（Agglomerative Clustering）、高斯混合模型（Gaussian Mixture Model, GMM）、K-means聚类、Mean-Shift聚类以及谱聚类（Spectral Clustering） 5种算法的聚类效果,并选取K-means算法作为充电桩选址规划参考算法。从城市区域划分及企业运营角度确定充电桩选址方案,为未来上海市区电动出租车充电桩的数量和容量配置提供设计依据。