横梁端部节点优化

通过有限元计算,对比几种常见的横梁端部连接方式,综合考虑结构整体强度、钢材使用量、舱室空间利用率、施工便利性等方面的影响因素,确定较优的连接过渡方式和过渡结构的参数尺寸,为船舶设计横梁端部节点形式的确定提供参考。     

装配式综合管廊在地铁车辆基地中的发展及应用探讨

装配式综合管廊在地铁车辆基地中的应用尚处于探索阶段,为了将装配式综合管廊与地铁车辆基地有效结合,提出一种适合于地铁车辆基地的装配式综合管廊解决方案。系统研究车辆基地发展装配式管廊的可行性,从目前车辆基地综合管廊建设和运营现状出发,提出了单仓和双仓两种管廊断面模式。通过应用BIM技术对管线进行碰撞检查和节点深化设计,并在管廊设计中考虑相关附属配套设施。工程实践证明,装配式综合管廊比现浇管廊土建成本减少4%,工期缩短45%,从安全、环保、质量、工期、场地、运维等多方面具有明显优势,应大力推广。下阶段应从标准化设计、施工方面对装配式管廊进行系统研究并争取尽快应用到实际项目中。     

大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。     

Time domain analysis procedures for fatigue assessment of a semi-submersible wind turbine

Long term time domain analysis of the nominal stress for fatigue assessment of the tower and platform members of a three-column semi-submersible was performed by fully coupled time domain analyses in Simo-Riflex-AeroDyn. By combining the nominal stress ranges with stress concentration factors, hot spot stresses for fatigue damage calculation can be obtained. The aim of the study was to investigate the necessary simulation duration, number of random realisations and bin sizes for the discretisation of the joint wind and wave distribution. A total of 2316 3-h time domain simulations, were performed.In mild sea states with wind speeds between 7 and 9 m/s, the tower and pontoon experienced high fatigue damage due to resonance in the first bending frequency of the tower from the tower wake blade passing frequency (3P).Important fatigue effects seemed to be captured by 1 h simulations, and the sensitivity to number of random realisations was low when running simulations of more than 1 h. Fatigue damage for the tower base converged faster with simulation duration and number of random realisations than it did for the platform members.Bin sizes of 2 m/s for wind, 1 s for wave periods and 1 m for wave heights seemed to give acceptable estimates of total fatigue damage. It is, however, important that wind speeds that give coinciding 3P and tower resonance are included and that wave periods that give the largest pitch motion are included in the analysis.     

基于隧道检测钢筋分布不均状况下判定衬砌结构安全性应用研究

近年来隧道内出现的越来越多的质量安全事故,引起各方高度重视,相应的最适宜隧道主体工程衬砌质量控制的地质雷达无损检测方法被广泛应用。通过雷达无损检测可揭露出衬砌内欠厚、脱空、钢筋分布不均等大量各类型缺陷,针对欠厚脱空等缺陷制定的注浆或开窗等治理措施是目前工程中常见的整改闭合工序,但钢筋分布不均对结构安全影响如何判定,怎么界定处理尚无成熟方案与规定。本文针对隧道项目中实际检测出的钢筋分布不均缺陷,在不宜大范围扰动结构及围岩进行整治的情况下,以及在避免其他问题共存等不利因素的前提下,应用有限元数值模拟计算分析强度安全系数,并结合现场外观等综合因素对衬砌结构安全性进行分析判定研究。     

Integrating capacity analysis with high-speed railway timetabling: A minimum cycle time calculation model with flexible overtaking constraints and intelligent enumeration

Compared with most optimization methods for capacity evaluation, integrating capacity analysis with timetabling can reveal the types of train line plans and operating rules that have a positive influence on improving capacity utilization as well as yielding more accurate analyses. For most capacity analyses and cyclic timetabling methods, the cycle time is a constant (e.g., one or two hours). In this paper, we propose a minimum cycle time calculation (MCTC) model based on the periodic event scheduling problem (PESP) for a given train line plan, which is promising for macroscopic train timetabling and capacity analysis. In accordance with train operating rules, a non-collision constraint and a series of flexible overtaking constraints (FOCs) are constructed based on variations of the original binary variables in the PESP. Because of the complexity of the PESP, an iterative approximation (IA) method for integration with the CPLEX solver is proposed. Finally, two hypothetical cases are considered to analyze railway capacity, and several influencing factors are studied, including train regularity, train speed, line plan specifications (train stops), overtaking and train heterogeneity. The MCTC model and IA method are used to test a real-world case involving the timetable of the Beijing–Shanghai high-speed railway in China.     

Labview应用程序开发中使用支持文件相对路径的有关问题

用Labview开发涉及支持文件读写的应用程序时,常会出现调试正常而可执行文件运行时找不到支持文件路径的错误。基于一简单示例,分析了产生此问题的原因并提供了解决问题的思路。     

Evaluating sustainability of supply chains by two-stage range directional measure in the presence of negative data

Assessing sustainability of supply chains is a critical and increasingly complex problem. In recent years sustainability has received more attention in supply chain management (SCM) literature with triple bottom lines including social, environmental, and economic factors. Conventional data envelopment analysis (DEA) models consider decision making units (DMUs) as black boxes that consume a set of inputs to produce a set of outputs and do not take into consideration internal interactions of DMUs. Two-stage DEA models deal with such DMUs. However, existing two-stage DEA models are applicable only in technologies characterized by positive inputs/outputs. This paper aims to build and present a new two-stage DEA model considering negative input-intermediate-output data. Some numerical examples along with some theorems and properties are given to show capability of proposed method. The proposed ideas are used in a case study where 29 Iranian supply chains producing equipment of expendable medical devices are evaluated in terms of sustainability.     

A carbon footprint-based closed-loop supply chain model under uncertainty with risk analysis: A case study

The management of products’ end-of-life and the recovery of used products has gained significant importance in recent years. In this paper, we address the carbon footprint-based problem that arises in a closed-loop supply chain where returned products are collected from customers. These returned products can either be disposed of or be remanufactured to be resold as new ones. Given this environment, an optimization model for a closed-loop supply chain (CLSC) in which carbon emission is expressed in terms of environmental constraints, i.e., carbon emission constraints, is developed. These constraints aim to limit the carbon emission per unit of product supplied with different transportation modes. Here, we design a closed-loop network where capacity limits, single-item management and uncertainty on product demands and returns are considered. First, fuzzy mathematical programming is introduced for uncertain modeling. Then, the statistical approach to the possibility to synthesize fuzzy information is utilized. Therefore, using a defined possibilistic mean and variance, we transform the proposed fuzzy mathematical model into a crisp form to facilitate efficient computation and analysis. Finally, the risk caused by violating the estimated resource constraints is analyzed so that decision makers (DMs) can trade off between the expected cost savings and the expected risk. We utilize data from a company located in Iran.     

The vulnerability of the environment to spills of dangerous substances on highways: A diagnosis based on multi criteria modeling

Highways and freeways are the main infrastructure channel used to transport cargo in Brazil. This cargo often includes dangerous chemical products which can, in the event of an accident, negatively impact the environment. The development and implementation of tools for the rapid diagnosis of environmental vulnerability in the transportation of dangerous goods has been studied. However, for highways and freeways there is a lack of studies based on environmental attributes, and not just based on statistical data which demands a specific period for collection and analysis and only after that the implementation of preventive measures. Thus, evaluation grounded on multiple criteria embedded in Geographic Information System (GIS) has significant potential for the practical implementation of risk management of road transportation of dangerous goods. This study has determined the environmental vulnerability of route BR 050, specifically the segment between the cities of Uberlândia and Uberaba in the state of Minas Gerais, where multi criteria analysis has been efficient in determining the most vulnerable areas. The main attributes analyzed were the drainage density, soil type and geology, determining that in case of an accident with dangerous substances the regional environment would be immediately affected, and so endorsing the use of this tool in many segments involved in environmental management of highway enterprises.