小型铣刨机车体升降油缸动态过程的分析

通过对小型铣刨机车体升降系统的简化,建立了液压缸运动速度与流量的传递函数,并且在系统参数静态设计方法的基础上,考虑了系统参数对其动态特性的影响.     

基于CFD的中低速Wigley船模黏性阻力

船舶阻力性能对船型参数的确定、船体结构的设计有重要影响。本文以Wigley船模为研究对象，采用CFD方法建立了行船阻力分析系统，以实际海况数据为依据，确定较准确的参数和边界条件，分析了不同航速（傅汝德数）下的低速行船阻力，并与理论公式对比分析。仿真测试结果表明：在实际海况数据下，CFD数值模拟阻力与理论ITTC公式计算的阻力误差在2%以内且发展趋势一致。本文的研究为采用CFD研究行船阻力奠定基础。     

基于生长曲线函数的货车运营环节碳达峰研究

货车是我国大气环境污染的重要来源之一，也是影响我国碳达峰总体目标实现的重要因 素。本文从货车运营环节入手，在运用生长曲线函数对货车保有量进行预测的基础上，对不同类 型货车的保有量和单车碳排放变化进行研究，并从货车节能技术发展、新能源货车推广和应用进 程两方面入手，分3种情景对货车运营环节中产生的碳排放总量趋势进行预判，推演货车运营环 节的碳达峰时间。研究结果表明，只有同时加快货车节能技术发展以及新能源货车推广和应用 进程，货车运营环节中产生的碳排放总量规模才能得到有效抑制并逐渐减少。若到 2030 年货 车单车燃料消耗水平较 2019 年降低 20%以上，新能源货车在货车整体保有量中的占比达到 20%，到 2060 年货车单车燃料消耗水平较 2019 年降低 50%，新能源货车占比达到 50%，则货车 运营环节碳达峰时间将缩短至2030年左右实现，2030年后货车运营环节产生的碳排放总量规 模将逐渐减少。     

Nonlinear pricing in linear cities with elastic demands

Nonlinear road pricing charges each traveler based on his/her trip’s corresponding particular attribute level. In order to help authorities in designing road pricing systems at a strategic level, this paper attempts to address two fundamental questions: (i) what is the value of pricing’s nonlinearity for mitigating traffic congestion? (ii) if a nonlinear toll function is implemented, should it be convex, concave or other shape? Specifically, we consider distance-based pricing in linear cities. For linear monocentric cities with heterogeneous travelers, we show that the system optimal distance-based pricing indeed exhibits nonlinearity. It is proved that: (i) the cost-based system optimal toll function is monotonically increasing and concave with respect to the traveled distance; (ii) the time-based system optimal toll function always exists and is unique. If the initial proportion of each traveler group is invariant along a corridor and the demand function is of exponential type, then the time-based system optimal toll function enables the travelers, living further away from a city center, to face a lower toll level per unit distance. For a linear polycentric city, we demonstrate: (i) there always exists the system optimal differentiated (in terms of city centers) toll functions; (ii) it is highly possible that the system optimal non-differentiated toll function does not exist. Hence, we further propose an optimal toll design model, prove the Lipschitz continuity of its objective and adopt a global-optimization algorithm to solve it.     

铺缆船用电缆埋设犁土壤挖掘阻力计算

传统的计算埋设犁土壤挖掘阻力的方法一般采用经验公式计算。经验公式依赖丰富的试验数据，且只能适应特定形状和尺寸的埋设犁。由于埋设犁的形状和尺寸各不相同，基于经验公式计算土壤挖掘阻力的方法准确性不高。根据土力学基本原理，在力学分析的基础上，运用数学方法进行公式推导，得到用于计算不同形状尺寸埋设犁挖掘阻力的理论方法，解决依赖经验公式计算土壤挖掘阻力的局限性。     

重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

导电密封胶对不锈钢车体电阻点焊焊接性能影响研究

分析了电阻点焊原理,对相同的点焊搭接方式,分别采用3种工况进行焊接试验。3种工况分别采用相同焊接参数对搭接接触面涂导电密封胶和不涂导电密封胶的试件进行焊接;优化焊接参数后,对搭接接触面涂导电密封胶的试验件进行焊接。对3种工况下完成的焊接试件进行拉伸力检测试验、金相熔核尺寸检测和缺陷检测试验,对熔核直径、拉伸力、熔核内部缺陷的试验结果进行分析。试验结果表明:导电密封胶对电阻点焊的焊接性能存在影响;通过适当优化焊接参数,可以提高涂导电密封胶试件的焊接性能,焊接质量能够满足产品焊接要求。     

船用电器柜抗冲击设计研究

为增强船内部电器柜的抗冲击性能,采用有限元法对船内不同安装型式的电器柜结构进行了模态和抗冲击性能仿真分析,通过对比分析得出了使用撑杆加固型式安装的电器柜能显著提高船内电器柜的抗冲击性能的结论,并确定了电器柜抗冲击优化设计方案。     

Mode jumping in the lateral buckling of subsea pipelines

Unburied subsea pipelines under high-temperature conditions tend to relieve their axial compressive stress by forming localised lateral buckles. This phenomenon is traditionally studied under the assumption of a specific lateral deflection profile (mode) consisting of a fixed number of lobes. We study lateral thermal buckling as a genuinely localised buckling phenomenon by applying homoclinic (‘flat’) boundary conditions. By not having to assume a particular buckling mode we are in a position to study transitions between these traditional modes in typical loading sequences. For the lateral resistance we take a realistic nonlinear pipe-soil interaction model for partially embedded pipelines. We find that for soils with appreciable breakout resistance, i.e., nonmonotonicity of the lateral resistance characteristic, sudden jumps between modes may occur. We consider both symmetric and antisymmetric solutions. The latter turn out to require much higher temperature differences between pipe and environment for the jumps to be induced. We carry out a parameter study on the effect of various pipe-soil interaction parameters on this mode jumping. Away from the jumps post-buckling solutions are reasonably well described by the traditional modes whose analytical expressions may be used during preliminary design.     

基于价值工程的全生命周期趸船材质方案比选研究

将趸船整个生命周期过程中的技术先进性、经济合理性和环境协调性有机地融合为一体,基于价值工程理论提出趸船材质方法比选。实例表明在千岛湖这样的大吨位船舶碰撞概率很小的水域,采用混凝土趸船明显优于钢质趸船。