绝热材料下沉对蒸汽管道热损失的影响

文中从绝热材料下沉的角度，利用形状因子法对高温蒸汽管线保温问题进行了探讨。通过理论分析和实验测试，得出了“复合硅酸盐保温涂料＋复合硅酸盐保温型材＋复合硅酸盐保温涂料”的保温结构，可有效改善绝热材料的下沉问题。     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Subsidy and public transit performance: A factor analytic approach

The need to measure and evaluate transit system performance has led to the development of numerous performance indicators. However, depending upon the indicator, we oftentimes reach different conclusions regarding transit system performance. The research reported in this paper uses factor analytic methods to generate a set of underlying attributes (factors) that capture the performance of public transit systems in Indiana. Similar to what is reported in the literature, this study finds three attributes that best describe transit system performance: efficiency, effectiveness, and overall performance. Based upon systemsÕ factor scores, the study finds that systems scoring highly on one attribute generally perform well on the remaining attributes. Further, there is an inverse relationship between system performance and subsidies, a finding that supports performance based subsidy allocations.     

电动汽车动力电池低温性能研究与应用

电动汽车锂离子动力电池在低温条件下工作时,电池的内阻明显升高、功率和能量急剧下降,导致整车低温下动力性能不足、续驶里程不足、充电受限等问题。通过试验进行了动力电池的低温特性研究,提出了适合整车低温工作的解决方案,通过实车验证,达到了很好的效果。     

桥面不平顺对下承式系杆拱桥振动影响的试验和模拟研究

为了获得下承式系杆拱桥的汽车荷载冲击系数,在桥面间隔布置橡胶减速条带以形成周期性的不平顺输入,对下承式钢管混凝土系杆拱桥的动挠度进行现场实测.结合自编的车桥耦合(VBI)单元,建立车-桥耦合振动三维有限元分析模型,通过与实测结果对比验证VBI单元的正确性.在此基础上,引入另外3座标准拱桥以形成涵盖4种跨径的下承式系杆拱...     

基于Vesic圆孔扩张理论的桩周土抗力计算方法研究

随着目前城市建筑物容量的增大,对作为其主要承载构件的桩基础的承载性能提出了更高的要求.桩-土相互作用问题是桩基水平承载性能研究中必须考虑的重要内容,该问题的研究对于完善桩基础设计理论和指导工程实践具有重要意义.基于Vesic圆孔扩张理论,分析水平荷载作用下桩侧土体的实际受力状态,根据桩身产生水平位移后桩周土应力为近似椭...     

考虑节理粗糙度的锚固节理岩体剪切试验

为研究粗糙度对锚固节理岩体剪切特性及锚杆抗剪作用的影响,提出了基于Synfrac软件与3D雕刻技术的岩石节理面三维重构方法,开展了不同节理粗糙度系数（JRC值）和不同法向应力下的锚固节理岩体剪切试验,研究了节理面剪胀效应对锚杆轴力、变形与破坏模式的影响,并在静力分析的基础上提出了考虑节理剪胀的锚杆抗力公式。试验结果表明：随着JRC值的增加,节理的剪胀效应使锚杆的轴向变形增大,从而使锚杆发挥出更大的轴力,提高了锚杆对节理面的剪切强度贡献（锚杆抗力）;锚杆轴力增大的同时使锚杆从拉剪破坏模式转变为拉弯破坏模式。根据试验结果,在静力分析的基础上,引入了巴顿公式中的剪胀角,提出了考虑JRC值和法向应力的锚杆抗力公式,公式预测结果与试验结果吻合良好,平均相对误差为7.6%。     

整车滑行阻力理论计算方法

通过对预研车型子系统如风阻、重量、轮胎滚阻系数等目标参数进行分析,结合参考车型道路滑行和转鼓滑行的试验数据,利用汽车相关理论原理,提出了三种计算预研车型的理论滑行阻力的方法,用于前期仿真和排放试验摸底.     

奥迪混合动力车型绝缘电阻故障引起整车无电动模式故障2例

有一辆奥迪Q5 hybrid混合动力汽车和一辆奥迪A6L e-tron混合动力汽车启动时,仪表报警,均显示混合动力系统故障,均无电动模式。初步判断故障范围在高压系统的高压线路连接以及安全控制系统。结合诊断仪读码的分析,故障范围锁定在某个或者多个高电压部件不绝缘,通过对所涉及的元件、电路等进行检测,故障点分别为电驱动装置的功率和控制电子单元内部积水、高电压蓄电池充电器内部不绝缘故障,对其分别进行积水清理、部件更换后,车辆仪表报警灯消失,可正常电动行驶。     

并联混合动力汽车ECMS的时变等效因子提取算法的研究

为解决当前等效燃油消耗最小控制策略(ECMS)未能根据实际工况选取最优等效因子的问题,利用动态规划算法(DP)和ECMS各自的优点,构建并联混合动力汽车能量算法模型,即采用动态规划算法的等效燃油消耗最小控制策略(ECMSwDP),将等效因子作为全局最优算法的控制变量,通过对等效因子的离散全局优化,获得基于工况的最佳时变等效因子。在标准工况下对时变等效因子实时控制策略与全局最优控制策略DP的各项性能参数进行了数值仿真,验证了时变等效因子提取算法的有效性和等效因子初始值选取方法的可行性。