潜艇典型结构在撞击载荷作用下动态响应的试验研究

针对潜艇典型结构单元（加筋平板和加筋圆柱壳）在受到撞击载荷作用下的损伤变形模式和撞击过程中结构的动态响应进行试验研究。研究结果表明：筋材的内置和外置对平板和壳体结构的损伤变形模式具有很大影响,但对加筋板和加筋圆柱壳模型结构整体的吸能特性并无太大影响;壳体结构与平板结构相比较,具有更好的吸能特性,平板结构具有更好的抗撞击能力。     

防风网结构风振疲劳特性研究

针对某港实际工程．采用有限元方法对防风网结构在脉动风荷载作用下的动力响应进行分析,并根据瞬态动力分析的结果,找出防风网结构应力疲劳最危险的单元。结合疲劳分析的基本理论,应用雨流法统计最危险单元的应力时程,得到应力循环次数及应力幅大小,根据Miner线性累积损伤准则编写ANSYS的风振疲劳程序．计算得到防风网结构的疲劳寿命。根据实际工程,验证设计风速为26．8m／s持续作用下防风网结构的疲劳寿命。     

轨道不平顺数值模拟方法

为了提高将轨道功率谱密度函数(PSD)通过数值模拟方法转换为时域样本的可靠度,分析了国内外常用的轨道不平顺数值模拟方法的模拟原理和步骤,采用计算机仿真程序模拟出各种方法生成的时域样本,并以此作为车辆垂向动力学模型的输入激励,通过数值仿真得出系统的时间-响应历程。各种模拟方法模拟结果比较表明采用各种方法模拟出的轨道不平顺时域样本是正确的,用三角级数法和逆Fourier变换法模拟出的时域样本的离散度较小,而用白噪声滤波法和二次滤波法模拟的时域样本离散度较大,因此后两种方法模拟出的轨道不平顺时域样本不宜作为研究系统时域响应时的轨道激励。     

AR自编码扩频通信系统的研究

在自编码扩频通信原理的基础上,介绍了利用自回归(Auto-Regressive,AR)滤波的方法从信源序列中提取扩频码的AR自编码扩频系统,并对该系统的误码性能和多址通信能力进行了理论分析和仿真.结果表明,AR自编码扩频系统改善了普通自编码扩频系统的误码性能,提高了系统的多址能力,为自编码扩频通信的实际应用提供了可选的方案.     

基于路面不平整度的车辆振动响应分析方法

为了分析路面与车辆的相互作用,提出了四自由度1/2车辆模型相对于不平整路面耦合振动分析方法。根据GB/T7031-1986建议的公路路面功率谱密度的拟合表达式,在分析了运行汽车固有振动频率和行驶速度的影响后,获得分布在一定频率范围内的离散功率谱密度数据,利用离散傅立叶逆变换得到路面不平度值,并以此作为1/2车辆垂向动力学模型的输入激励,通过数值仿真得到运行车辆系统在不同路面不平整度下的时域响应。分析结果表明:车辆动荷载系数随车速增大呈线性增加,随路面等级变差呈非线性增大,路面等级是影响车辆动力作用的最显著因素。     

结构水下爆炸响应的恢复与冲击谱计算

由于传感器受高强度冲击作用,实测的结构水下爆炸响应信号可能偏离正常特征,为进一步分析响应信号带来困难.文中针对实测加速度信号的噪声特征,对信号采用SVD及ARMA滤波处理,先恢复真实的响应信号,然后在此基础上,给出正确的冲击谱计算结果.计算结果说明了SVD结合无相差滤波能够准确分离具有阶跃特征的低频噪声信号,对低频段的冲击响应谱计算精度有利.     

The visual impact of development in coastal zone areas

Abstract

The focus of this paper is theoretical, as well as methodological. It reviews previous studies of visual impact and reports research by the author on people's evaluation of the appropriateness of different man‐made facilities in different coastal‐area contexts and other environments. In this study, subjects were asked to react to slides developed through the use of landscape models and experimental facilities to simulate the appearance of a building in the landscape, while systematically varying the visual relatedness between the two. Specific interest centered on the variable of congruity vs. contrast between the appearance of the building and its landscape context, manipulated by co‐varying the attributes of color and size to create a five‐point scale of contrast/obtrusiveness. The hypothesis was that judgments of appropriateness, and to a lesser extent judgments of liking, would vary inversely with level of contrast. The role of two further variables, the functional significance of the building in its setting, and the character of the setting itself, was also investigated. The author reviews methodological issues involved where subjects respond to visual stimuli for purposes of judging change in visual quality. These methodological issues include: stimulus‐selection and problems of simulation, choice of response measures, and choice of respondents, and the treatment of individual differences. The author calls for development of standardized scales and indices such as “perceptually‐relevant environmental quality indicators.”     

基于瞬态法的行李箱盖动态干涉研究

行车过程中行李箱盖在路面激励载荷作用下发生振动,当振动量超过行李箱盖和车身分缝间距时,就会发生干涉,导致漆膜破裂。文章利用有限元方法对汽车行李箱盖进行瞬态响应分析,并对其进行优化,最终经过台架试验和道路试验验证方案有效。为行李箱盖总成设计开发提供理论依据,并完善行李箱盖设计规范。     

Asymmetric response model for evaluating airline service quality: An empirical study in cross-strait direct flights

In this paper we propose a framework to investigate service quality asymmetrically. An asymmetric response model within structural equation framework is developed to study the relationship between service quality and the passenger’s behavioral intention in the cross-strait direct flight (Taiwan–Shanghai). The results reveal that service quality in the loss region has more impact on behavioral intention than service quality in the gain region. Hence, attention should be paid to the service quality of important attributes in the loss region and strategies should ensure service quality of those important attributes that meet passenger’s expectations.     

信号采样理论在交通流检测点布设中的应用

在对交通流检测点布设领域研究应用现状进行分析与抽象的基础上,提出交通流检测点布设本质上属于空间交通流信号采样问题。依据信号采样理论,建立了确定检测点间距或密度的方法与流程,该流程包括空间交通流信号产生、离散傅里叶变换、频谱分析、间距确定、误差分析5个步骤。对高速公路拥挤状态下的仿真分析表明:100 m的检测点间距可以满足对拥挤交通流状态的真实检测,该数值接近于实际应用中的最小值(125 m),说明该理论方法具有较好的实用性。