The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.     

道路环境对交通安全的影响及对策

交通安全,涉及到人、车以及道路和环境等很多因素。近年来,因为各种原因使得有关单位以及人员将更多的将精力放在人、车、道路这几个因素上,对道路交通环境没有过多的考虑和研究。深入研究道路交通环境,有利于道路交通的安全,文章通过对其的研究和分析,得出有关道路交通环境对交通安全的影响和解决措施,对于防止道路交通安全事故具有重要意义。同时为人们的生命财产的安全提供保障、对构建社会主义和谐社会具有很大帮助。     

Environmental and transport effects of warehouse relocationing: evidence from Norway

Reducing traffic volumes and CO2-emissions from freight transport has proven difficult in many countries. Although the increasing suburbanization of warehouses is seen as a relevant land use trend, comprehensive analyses of their impact remain scarce. This study uses real data in modeling transport, costs, environmental and modal effects from warehouse relocations around Oslo and Trondheim (Norway). Results indicate that for Oslo, traffic performance (ton-km), CO2-emissions, and transport costs increase following warehouse suburbanization. For Trondheim, transport performance and CO2-emissions increase less, while transport costs decrease marginally. We conclude that specific case characteristics (geography and trade patterns) are important in determining the strength and direction of effects, and expect that common concomitant developments (warehouse centralization and consolidation) would lead to more pronounced results. Our findings confirm some, but challenge other, findings from the relatively scarcely literature available. Finally, the study's more general insights and observations can help advance similar analyses beyond Norway.     

Tyre/road noise damping characteristics using nomographs and fundamental vibroacoustical relationships

Several studies have successfully developed laboratory and field measurement techniques to estimate tyre/road noise damping characteristics. However, laboratory–field noise correlations of pavement types in the form of nomographs is essential to cognize the pavements’ acoustical properties from a practical perspective. A toolkit that readily provides field tyre/road noise intensity of different pavement materials is needed. Thus, the main objective of this study was to develop nomographs with relationships for tyre/road noise versus pavement materials’ viscoelastic–vibroacoustical properties. Isothermal and isochronal nomographs of phase angle–tyre/road noise as toolkits were developed based upon well-established phase angle and noise intensities typical of mixtures, making the nomograph correlations very authentic, realistic, and novel along with benefit to predict tyre/road noise at any desired temperature and traffic speed (or frequency) combination. This study is envisaged to benefit in the discernment of road materials’ damping capabilities from vibroacoustical and field noise–viscoelastic relation aspects.     

面向智能车辆的现役道路设施行驶适应性研究综述

为了总结面向智能车辆的现役道路设施行驶适应性，即现役道路基础设施承载智能车辆行驶的适宜程度，阐述自主智能驾驶定义与驾驶自动化等级分类，在此基础上剖析不同等级间的人机功能差异，并分别从感知层、感知-决策层、决策-控制层探讨与道路设计要素相关联的人机功能差异，通过归纳总结智能车辆与道路几何要素、路面性能及其他道路要素(如道路标线)的相互作用机制研究，从道路工程角度及其他道路要素方面回顾该领域的研究现状，指出存在的问题和未来发展方向。研究结果表明：相比传统车辆，配置高等级自动驾驶系统的智能车辆对现役道路设施行驶适应性最高，主动安全系统次之，而驾驶辅助及有条件自动驾驶系统适应性不足。而目前研究主要问题包括：难以归纳、标定不同驾驶自动化等级间的人机功能差异及其对于道路设计参数的需求设计值；测试道路场景条件过于理想，考虑的驾驶自动化等级单一，试验规模和样本有限；道路几何、路面性能以及道路标志、标线等道路要素与智能车辆间的相互作用机制研究不足，缺乏与不同道路场景相匹配的智能车辆驾驶特征数据的获取手段。因此建议：重视并推动与道路设计要素相关联的关键人机功能差异指标信息共享；联合高保真且可交互的道路场景、高精度感知传感器物理模型、车辆动力学模型及微观交通流模型，利用测试场景自动化生成、极限工况场景搜寻与泛化等技术开展智能驾驶虚拟测试，突破现有研究的深度和广度；探索反映不同等级智能车辆的道路行驶适应性特征指标与评价标准，精准、有效地评估预测复杂道路场景及不利道路条件下的行驶适应性。     

基于群决策层次理论的预防性养护方案决策

基于高速公路预防性养护决策方案选择的特性,使用群决策理论的层次分析法,通过对决策组成员意见的集合,得到了各成员动态权重,减少主观误差,提高决策方案结果的客观可靠性。通过案例,将措施费用、行车特征、技术因素、施工因素等作为目标层,对4种备选方案进行分析,得出最佳措施。案例结果证明群决策方法的有效性与可靠性,为选择合理的养护措施提供参考。     

Generating lane-based intersection maps from crowdsourcing big trace data

Lane-based road information plays a critical role in transportation systems, a lane-based intersection map is the most important component in a detailed road map of the transportation infrastructure. Researchers have developed various algorithms to detect the spatial layout of intersections based on sensor data such as high-definition images/videos, laser point cloud data, and GPS traces, which can recognize intersections and road segments; however, most approaches do not automatically generate Lane-based Intersection Maps (LIMs). The objective of our study is to generate LIMs automatically from crowdsourced big trace data using a multi-hierarchy feature extraction strategy. The LIM automatic generation method proposed in this paper consists of the initial recognition of road intersections, intersection layout detection, and lane-based intersection map-generation. The initial recognition process identifies intersection and non-intersection areas using spatial clustering algorithms based on the similarity of angle and distance. The intersection layout is composed of exit and entry points, obtained by combining trajectory integration algorithms and turn rules at road intersections. The LIM generation step is finally derived from the intersection layout detection results and lane-based road information, based on geometric matching algorithms. The effectiveness of our proposed LIM generation method is demonstrated using crowdsourced vehicle traces. Additional comparisons and analysis are also conducted to confirm recognition results. Experiments show that the proposed method saves time and facilitates LIM refinement from crowdsourced traces more efficiently than methods based on other types of sensor data.     

基于传播模型的非机动车违规过街行为研究

为研究信号交叉口非机动车违规过街行为，选取西安市的7个信号交叉口，通过视频拍摄获取资料，应用复杂网络来分析非机动车网络的结构特征和演化规律.建立了交叉口非机动车网络，基于SI模型的基本思想，提出了非机动车违规过街行为的传播模型.并通过python程序进行模拟分析，在不同的网络结构和不同的传播率下，获取了非机动车违规过街的行为趋势.结果表明：随着等待时间的增加，一旦有骑行者闯红灯，更多的骑行者将加入到违规过街的行列；在内向度和外向度方面，电动自行车均高于普通自行车；非机动车违规行为随着传播率及非机动车流量的增加而增加.     

典型交叉口非机动车二次过街设计方法

以宁波市典型灯控交叉口为例，介绍了非机动车二次过街的设计方法，并详细分析了非机动车二次过街方式的设置条件、左转待转区的设置及二次过街的交通组织方式。     

城市大型医院周边道路交通问题剖析及改善对策——以深圳市为例

为了合理科学组织医院周边及内部交通,避免重现目前深圳大型医院周边普遍存在的交通拥堵、停车困难、进院车辆排队、的士乘坐不便等交通问题,以深圳市为例,分析现状大型医院周边存在的道路交通问题和产生原因,提出完善周边道路交通设施、大力发展公共交通、合理规划医院布局、建立科学有效的交通组织体系等改善对策.