结合兰州彭家坪T210#路建设浅淡城市高坪地区道路选线

城市高坪地区通常存在区域交通不畅的问题,出口道路经常制约着城市高坪地区的经济、文化发展.该文结合兰州市彭家坪T210#路路线选择,总结了城市面上高坪地区选线的几点经验,可供道路专业人员参考.     

贵阳市西南环线二期总体方案

贵阳市西南环线二期位于城市中心区东南部,地形起伏大,属于旧路拓宽改建项目。针对项目特点,对总体思路、方案布置等方面进行了介绍,为类似山区城市道路方案研究提供参考。     

昆山市东城大道快速化改造工程总体设计

东城大道是昆山“双环-四联-八射”快速路系统外环中东环的重要组成部分,对其进行快速化改造须开展总体方案设计研究.以功能需求分析为依托、交通量分析为支撑,梳理了沿线重要节点及控制物,特别针对两处现状隧道控制条件,提出了两个总体设计方案,并对方案进行了论证与比选.最后综合考虑现状隧道、沿线高压铁塔及重要出行节点等控制因素,确定了总体方案和出入口布置,效果良好.     

考虑沥青路面材料参数空间差异性的解析计算及影响分析

复杂服役环境下沥青路面的材料参数存在明显的空间差异性，具体表现为沿深度的模量梯度分布与非连续层间接触以及横观各向同性，实现其解析计算对现有的沥青路面力学响应分析及结构设计方法具有重要的参考价值。为此，从弹性力学基本方程出发，基于状态空间法，推导了具有指数模量梯度的横观各向同性弹性层状体系通解；在此基础上，基于波传递方法，将状态向量转换为波向量，并结合边界条件和层间条件，建立了考虑沥青路面材料参数差异性的多层路面结构解析解；然后借助MATLAB平台编制了数值计算程序，采用文献对比、BISAR程序以及有限元软件ABAQUS验证了该解析解的精度与效率；最后结合典型数值算例，阐述了该解析解在沥青Top-Down开裂和传统路面疲劳损伤分析中的应用。理论推导和数值计算结果表明：该解析解摆脱了弹性力学问题求解对应力函数的依赖性，并且借助波传播方法，避免了求解中正指数过大对求解精度的影响，并使得边界条件和不同层间接触关系的描述更加便捷；沥青路面材料参数的空间差异性不可忽视，沥青面层连续模量梯度会造成更大的路表拉应力和最大剪应力，进而加剧沥青路面的Top-Down开裂；而横观各向同性和层间接触状态间存在耦合效应，从而会加剧沥青路面的疲劳损伤。     

Modeling the relationships among urban passenger travel carbon dioxide emissions,transportation demand and supply,population density,and proxy policy variables

To support the development of policies that reduce greenhouse gas (GHG) emissions by encouraging reduced travel and increased use of efficient transportation modes, it is necessary to better understand the explanatory effects that transportation, population density, and policy variables have on passenger travel related CO₂ emissions. This study presents the development of a model of CO₂ emissions per capita as a function of various explanatory variables using data on 146 urbanized areas in the United States. The model takes into account selectivity bias resulting from the fact that adopting policies aimed at reducing emissions in an urbanized area may be partly driven by the presence of environmental concerns in that area. The results indicate that population density, transit share, freeway lane-miles per capita, private vehicle occupancy, and average travel time have a statistically significant explanatory effect on passenger travel related CO₂ emissions. In addition, the presence of automobile emissions inspection programs, which serves as a proxy indicator of other policies addressing environmental concerns and which could influence travelers in making environmentally favorable travel choices, markedly changes the manner in which transportation variables explain CO₂ emission levels.     

Speed-independent vibration-based terrain classification for passenger vehicles

Terrain physical characteristics can have a significant impact on passenger vehicle handling, ride quality, and stability. Here, an algorithm is presented to classify terrain using a single suspension-mounted accelerometer. The algorithm passes a measured acceleration signal through a dynamic vehicle model to estimate the terrain profile, and then extracts spatial frequency components of this estimated profile. A method is introduced to identify and remove terrain impulses from the profile that are caused by ruts and potholes. Finally, a supervised support vector machine is employed to classify profile segments as members of pre-defined classes (such as asphalt, brick, gravel, etc.). The classification algorithm is validated with experimental data collected with a passenger vehicle driving in real-world conditions. The algorithm is shown to classify multiple terrain types with reasonable accuracy at a range of typical automotive speeds. It is also shown that the removal of terrain impulses prior to classification improves classifier performance.     

Mathematical properties and constraints representation for bottom-up approaches to the evaluation of GHG mitigation policies

Bottom-up models, including MARKAL, MESSAGE and AIM, are widely used when analyzing the effect of greenhouse gas (GHG) abatement policies. These bottom-up models are mostly formulated as a linear programming (LP) optimization model to find both the minimal cost combination of abatement technologies and energy flows while satisfying demands. It is not unusual that the bottom-up modeling involves a great number of technical, industrial, socioeconomic and environmental constraints. Investigating representative constraints needed for analyzing GHG abatement policies, this study proposes how to implement these constraints in bottom-up modeling.     

����ϵ�����ڳǼʸ�������������е�Ӧ��

高速铁路为人们提供了一种高效的运输方式.本文借鉴弹性系数法的相关理论,首先运用广义费用函数测算样本中高铁开通前后两地区综合客运成本的变化,结合两地区高铁开通前后客运量的变化得到了运输成本弹性系数,用于衡量两地区对于高铁开通的迫切性程度,从而在另一个层面衡量高铁建设的可行性.然后根据运输经济学及新经济地理学的相关理论,从人口、距离、人均GDP差异、平均人均GDP和产业结构相似度5个维度对样本的运输成本弹性系数进行建模,运用神经网络的方法来拟合其对运输成本弹性系数的影响情况,并以此为依据来测算北京市和张家口市对即将开通的京张高铁的迫切性程度.     

Roads in transition: Integrated modeling of a manufacturer-traveler-infrastructure system in a mixed autonomous/human driving environment

This paper develops an integrated model to characterize the market penetration of autonomous vehicles (AVs) in urban transportation networks. The model explicitly accounts for the interplay among the AV manufacturer, travelers with heterogeneous values of travel time (VOTT), and road infrastructure capacity. By making in-vehicle time use more leisurely or productive, AVs reduce travelers’ VOTT. In addition, AVs can move closer together than human-driven vehicles because of shorter safe reaction time, which leads to increased road capacity. On the other hand, the use of AV technologies means added manufacturing cost and higher price. Thus, traveler adoption of AVs will trade VOTT savings with additional out-of-pocket cost. The model is structured as a leader (AV manufacturer)-follower (traveler) game. Given the cost of producing AVs, the AV manufacturer sets AV price to maximize profit while anticipating AV market penetration. Given an AV price, the vehicle and routing choice of heterogeneous travelers are modeled by combining a multinomial logit model with multi-modal multi-class user equilibrium (UE). The overall problem is formulated as a mathematical program with complementarity constraints (MPCC), which is challenging to solve. We propose a solution approach based on piecewise linearization of the MPCC as a mixed-integer linear program (MILP) and solving the MILP to global optimality. Non-uniform distribution of breakpoints that delimit piecewise intervals and feasibility-based domain reduction are further employed to reduce the approximation error brought by linearization. The model is implemented in a simplified Singapore network with extensive sensitivity analyses and the Sioux Falls network. Computational results demonstrate the effectiveness and efficiency of the solution approach and yield valuable insights about transportation system performance in a mixed autonomous/human driving environment.     

山区农村公路安全保障工程应用技术研究

在对山区农村公路广泛调研的基础上,针对事故多发路段,运用具有山区农村公路特色的安全保障技术,对不同危险路段综合安全保障工程的应用进行论述,提出相应的安全保障工程改善对策。