边坡稳定性分析的广义Bishop法

鉴于简化B ishop法作为一种简单实用且精度较高的极限平衡方法却仅限于分析圆弧破坏的缺陷,提出将B ishop法应用于任意滑裂面的广义方法.基于极限平衡理论和简化B ishop法的简化条件,推导其用于一般滑裂面破坏的边坡安全系数计算公式.通过实例分析考证比较该法的精度,并提出取矩中心的确定方法,以保证竖向力简化假设下的精度,为土坡稳定性分析提供了一种简单通用的方法.     

集装箱吊具开闭锁机构的系统分析

介绍了集装箱码头岸桥吊具开闭锁机构电气、液压、机械三大系统的工作原理以及它们相互之前的关系,通过吊具开闭锁机构日常的故障深入地分析了这三大系统重要特点,并介绍了该机构一些隐性故障的预防以及解决方法。     

Two-dimensional numerical simulation and experiment on strongly nonlinear wave–body interactions

A constrained interpolation profile (CIP)-based Cartesian grid method for strongly nonlinear wave–body interaction problems is presented and validated by a newly designed experiment, which is performed in a two-dimensional wave channel. In the experiment, a floating body that has a rectangular section shape is used. A superstructure is installed on the deck and a small floating-body freeboard is adopted in order to easily obtain water-on-deck phenomena. A forced oscillation test in heave and a wave–body interaction test are carried out. The numerical simulation is performed by the CIP-based Cartesian grid method, which is described in this paper. The CIP scheme is applied in the Cartesian grid-based flow solver. New improvements of the method include an interface-capturing method that applies the tangent of hyperbola for interface capturing (THINC) scheme and a virtual particle method for the floating body. The efficiency of the THINC scheme is shown by a dam-breaking computation. Numerical simulations on the experimental problem for both the forced oscillation test and the wave–body interaction test are carried out, and the results are compared to the measurements. All of the comparisons are reasonably good. It is shown, based on the numerical examples, that the present CIP-based Cartesian grid method is an accurate and efficient method for predicting strongly nonlinear wave–body interactions.     

Database of sail shapes versus sail performance and validation of numerical calculations for the upwind condition

A database of full-scale three-dimensional sail shapes is presented with the aerodynamic coefficients for the upwind condition of International Measurement System (IMS) type sails. Three-dimensional shape data are used for the input of numerical calculations and the results are compared with the measured sail performance. The sail shapes and performance were measured using sail dynamometer boat Fujin. This is a boat of 10.3-m length overall in which load cells and CCD cameras were installed to simultaneously measure the sail forces and shapes. At the same time, the sailing conditions of the boat, e.g., boat speed, heel angle, wind speed, and wind angle, were measured. The sail configurations tested were: mainsail with 130% jib, mainsail with 75% jib, and mainsail alone. Sail shapes were measured at several vertical positions for the shape parameters defined by: chord length, maximum draft, maximum draft position, entry angle at the luff, and exit angle at the leech, all of which finally yield three-dimensional coordinates of the sail geometry. The tabulated shape data, along with aerodynamic coefficients, are presented in this article. In addition, numerical flow simulations were performed for the measured sail shapes and the sailing conditions to investigate the capability and limitations of the methods through detailed comparison with the measurements. Two numerical methods were used: a vortex lattice method (VLM) and a Reynolds-averaged Navier–Stokes (RANS)-based computational fluid dynamics method. The sail shape database, in association with the numerical results, provides a good benchmark for the sail performance analysis of the upwind condition of IMS type sails.     

Water entry of a bow-flare ship section with roll angle

The two-dimensional water entry of a bow-flare ship section with constant roll angle, or heel angle, was studied by using a boundary element method. The fully nonlinear free surface conditions and exact body boundary conditions were satisfied. Nonviscous flow separation from the knuckles of the section or from the curved bottom could be simulated. The numerical calculations were compared with existing experimental results. First, the effects of roll angle were investigated and then the characteristics associated with large roll angles were examined in particular. The evolution of the free surfaces and the pressure distributions on the section surface are illustrated and the influence of nonviscous flow separation from the leeward section surface is discussed.     

海上溢油收集装置概念设计

随着海洋石油开采和运输事业的日益发展,海上溢油问题的研究越来越受到重视,具有重要的理论价值和实际意义.论文针对各类海上溢油事故,在现有技术的基础上进行突破和创新,提出了三套新概念的海上溢油处理装置,热气球海上浮油收集装置、海上铲车浮油收集器和下潜式浮油收集器,分别利用漩涡原理,面面接触的物理方式和生物环保技术,有效提高海上溢油的收集效率,丰富了溢油处理装置的设计理念,为后续的详细设计奠定了基础.     

LNG船疲劳强度评估及低温影响的讨论

以某LNG船为研究对象,建立三舱段有限元模型,并根据美国船级社薄膜型LNG船体结构疲劳强度指南,基于SN曲线法的疲劳积累损伤原理,分别采用名义应力和热点应力法,对船体典型节点进行疲劳强度评估,同时对计算结果进行分析;讨论低温下材料性能改变对节点疲劳寿命评估的影响。研究表明,采用常温下SN曲线进行LNG船疲劳强度评估是合适的。     

运输船电力负荷计算探讨

文章对电力负荷计算的计算方法、计算工况、设备本身功率的选取、计算表中涉及的相关系数的确定等四个方面的问题进行探讨,分别阐述了它们对电站配置的重要影响,并提出了合理配置电站的基本思考原则。     

湿喷碳素纤维混凝土在大断面黄土隧道中的应用

黄嶂3号隧道是新建太中银铁路全线最大断面黄土隧道,最大断面面积为193．73m^2,洞身穿越地层主要为老黄土,受黄土软弱性、离散性、湿陷性和膨胀性影响,洞周出现较大变形,造成喷射混凝土支护的破坏和失效。结合实际情况,选用碳素纤维作为湿喷混凝土的添加料,研究了配套施工工艺和质量控制方法。现场应用表明,湿喷碳素纤维混凝土能够减少喷射混凝土的回弹率,改善洞内施工环境,有力保证喷射混凝土的质量并提高喷射混凝土的残余强度。此项技术在隧道施工中起到了积极的作用,对类似工程有较强的借鉴意义。     

沉箱结构的有限元分析

某码头为大直径圆沉箱重力墩式结构,应用大型有限元分析软件ANSYS,对沉箱结构建立三维有限元模型,分别按考虑地基与沉箱作用和不考虑地基与沉箱作用进行计算。计算与分析结果表明,2种算法上部结构的计算结果相近,不考虑沉箱与地基共同作用的底板内力过于保守。