新五维超混沌系统反同步研究

以新五维超混沌系统为对象，基于Lyapunov稳定性理论，采用非线性控制法、主动控制法及全局控制法，分别设计了控制器，实现了新五维超混沌系统的反同步。通过数值仿真，对三种方法的反同步效果进行了验证和对比分析，结果显示主动控制法优于其它两种方法。     

保证路基长期稳定性的技术措施研究

路基长期稳定性是一个综合性的问题,要想通过设计或施工一劳永逸的解决,在技术上是困难的,在经济上也是不适宜的。只有通过对设计、施工、养护三者综合考虑,把握影响路基长期稳定性的关键因素,才能经济、合理地解决该问题,使公路更好地为经济建设服务。     

关于木材运输船安全运输的几点分析

木材船海上运输具有一定的风险,一旦积载和绑扎不当或管理不妥,造成货物滚动、移位、货垛倒塌,就会引发安全事故甚至导致船舶倾覆。因此,加强木材船的安全管理,落实各项安全保障措施,是确保木材船安全运输生产的重要举措。     

钢檩条设计中的若干问题

轻型屋面钢檩条的竖向荷载、整体稳定性计算以及檩条与屋面梁、屋架的连接构造是设计的重要环节,本文结合规范和国家标准设计图的编制提出若干问题,供参考.     

汕头苏埃隧道方案设计关键技术研究

根据汕头苏埃隧道的建设条件,对工程方案设计中的几个技术难点进行研究,并提出解决方案。通过采用"多级分流"理念,实现隧道与北岸4条城市主干道的交通衔接;选择"抛石+排水板"方案解决海域深厚淤泥地层中的围堰设计;8度高烈度震区选择合理的抗震减震措施解决隧道结构抗震;采取双道密封垫和加大密封垫断面的防水设计,满足地震时管片接缝张开量大的防水要求;针对复杂地层,对盾构选型和配置提出建议;对海底凸起进入隧道内的硬岩进行爆破预处理,以降低盾构施工风险。     

薄基岩顶板隧道爆破施工围岩稳定性分析

为更有效地进行薄基岩顶板条件下隧道施工安全控制,以某高速公路隧道为工程背景,运用数值模拟的方法,分别研究不同顶板厚度下隧道爆破施工引起的围岩振速分布特征及其对围岩的损伤情况,并进行围岩稳定性分析。结果表明:1)当顶板厚度在5 m及以上时,围岩是稳定的;2)当顶板厚度为3 m时,最危险横断面上基岩顶板内开始产生严重的拉伸裂缝及一些径向裂缝,将形成超挖;3)当顶板厚度≤2 m时,径向裂缝贯穿顶板岩体,围岩稳定性较差,在掌子面后1 m内可能发生塌落、掉块等事故。     

Magneto-rheological suspensions for improving ground vehicle’s ride comfort,stability, and handling

ABSTRACT

A state-of-the-art discussion on the applications of magneto-rheological (MR) suspensions for improving ride comfort, handling, and stability in ground vehicles is discussed for both road and rail applications. A historical perspective on the discovery and engineering development of MR fluids is presented, followed by some of the common methods for modelling their non-Newtonian behaviour. The common modes of the MR fluids are discussed, along with the application of the fluid in valve mode for ground vehicles’ dampers (or shock absorbers). The applications span across nearly all road vehicles, including automobiles, trains, semi-trucks, motorcycles, and even bicycles. For each type of vehicle, the results of some of the past studies is presented briefly, with reference to the originating study. It is discussed that Past experimental and modelling studies have indicated that MR suspensions provide clear advantages for ground vehicles that far surpasses the performance of passive suspension. For rail vehicles, the primary advantage is in terms of increasing the speed at which the onset of hunting occurs, whereas for road vehicles – mainly automobiles – the performance improvements are in terms of a better balance between vehicle ride, handling, and stability. To further elaborate on this point, a single-suspension model is used to develop an index-based approach for studying the compromise that is offered by vehicle suspensions, using the H₂ optimisation approach. Evaluating three indices based on the sprung-mass acceleration, suspension rattlespace, and tyre deflection, it is clearly demonstrated that MR suspensions significantly improve road vehicle’s ride comfort, stability, and handling in comparison with passive suspensions. For rail vehicles, the simulation results indicate that using MR suspensions with an on-off switching control can increase the speed at which the on-set of hunting occurs by as much as 50% to more than 300%.     

A study on the stability of a motorcycle wheel–swingarm suspension with chain transmission

The present study describes a possible driving mechanism for a self-excited oscillation observed in motorcycle dynamics, often referred to as chatter. This phenomenon, affecting the performance of road racing motorcycles, has been simulated in straight running braking manoeuvres with multibody motorcycle models. It involves rear suspension bounce and driveline oscillation in the frequency range between 17 and 22?Hz. A simplified model of a motorcycle rear suspension with chain transmission is proposed and its stability in equilibrium configurations is studied via eigenvalue analysis. The sensitivity with respect to all its governing parameters is analysed by means of stability maps and the self-excitation mechanism is explained with the aid of energy balance analysis and phase diagrams. It is found that the key role for the instability onset is played by the gradient of the nonlinear characteristic slip function of the tyre.     

Simulation and analysis of vehicle stability based on ADAMS/CAR differential brake

To improve the braking safety of automobiles, the author studied the effect of differential brake on the stabilities. To analyze the mechanical characteristics of differential brake, automotive subsystem models were built by applying ADAMS/CAR, and automotive mechanics simulation model was built by setting the main subsystems such as body, engine and brake. The simulation model studied the distribution mode of three kinds of differential brake, and beeline braking stability and turning braking stability were simulated. It shows that differential brake can amend turning shortage of automobile brake and improve its braking stability, but the effect of automobile mass on its braking stability is great. So the distribution mode of braking force and the effect of mass change should be considered while differential brake is applied.     

地震作用下钢筋混凝土桥墩抗倒塌性能研究

为研究混凝土桥墩的结构抗震性能,进行了单墩多自由度体系非线性静力推倒分析、非线性动力分析、增量动力分析。分别采用纤维模型中分布塑性铰和集中塑性铰两种建模方法,建立单墩有限元模型,利用Open Sees软件中的Hysteretic滞回模型考虑各种累积损伤的影响。