水面自主船舶技术发展路径

工业4.0背景下,船舶自主化航行是水路运输工具变革的重要趋势。本文首先详细介绍了世界范围内水面自主船舶(MASS)的主要研究项目发展路径及当前的研究现状。然后分析了MASS研发的关键技术,如通讯、航路设计及优化、智能避障等。针对MASS的快速发展,指出了当前面临的困难与挑战。最后针对法律及法规等配套体系的完善提出展望。     

人机混驾环境下基于深度学习的车辆切入轨迹预测

为保证人机混驾环境下自动驾驶汽车的安全行驶,对周围车辆切入轨迹的预测至关重要.本文首先使用Savitzky-Golay滤波器对大规模采集的自然驾驶数据进行去噪处理,根据准则提取车辆切入片段,建立符合中国道路状况的车辆切入数据集.其次,发挥Bi-LSTM网络能充分利用上下文信息的优点和in-out快捷连接有效减少梯度消失...     

Design of an adaptive controller for dive-plane control of a torpedo-shaped AUV

Underwater vehicles operating in complex ocean conditions present difficulties in determining accurate dynamic models. To guarantee robustness against parameter uncertainty, an adaptive controller for dive-plane control, based on Lyapunov theory and back-stepping techniques, was proposed. In the closed-loop system, asymptotic tracking of the reference depth and pitch angle trajectories was accomplished. Simulation results were presented which show effective dive-plane control in spite of the uncertainties in the system parameters.     

GPS-based optimization of plug-in hybrid electric vehicles’ power demands in a cold weather city

Using the WPG03 duty cycle developed from global positioning data collected in Winnipeg, Canada, real world energy demands and costs are modeled. Three types of plug-in hybrid electric vehicles, four temperatures and two charging scenarios are compared to a vehicle with an internal combustion engine. Cold temperatures are shown to greatly affect vehicle operation energy costs, which is an important consideration for cold weather cities such as Winnipeg. The largest energy cost savings are obtained for smaller-battery plug-in hybrids that had the opportunity to charge during the day.     

基于多属性决策运输车编配方案研究

在信息化战争中,后勤运输保障举足轻重。根据部队运输需求,制定出科学合理的运输车编配结构对于提高部队公路运输保障能力具有重要的指导意义。分析了我军运输车编配存在的问题,介绍了基于最大离差化的多属性决策模型,为运输车编配方案评价提供了一种合理的研究方法。并以某摩步师直属汽车营为例,对运输车的备选方案进行了排序和选优,得到了...     

网联环境下混合交通流偶发拥堵演化机理研究

针对混合交通流中智能网联车辆(Connected and Autonomous Vehicles, CAVs)和人工驾驶车辆的交织干涉问题,本文在传统交通流统计理论模型和一阶连续介质模型的基础上,通过引入智能驾驶员跟驰模型(Intelligent driver model, IDM)和协同自适应巡航控制模型(Cooperative Adaptive Cruise Control, CACC),构建人工驾驶车辆和CAVs的混合交通流偶发拥堵演化模型,探索CAVs混入和诱导干涉措施对混合交通流偶发性拥堵传播规律的影响。实验选取重庆市华陶立交至巴南立交路段为路网原型,对CAVs不同渗透率( Pc )下的路段拥堵演化情况进行仿真。实验结果表明：CAVs渗透率越高,混合流流量、占有率和速度的改善情况越显著,但只有当 Pc ≥ 0.2 时,网联车辆对拥堵消散的改善效果才较为明显;Pc ≤ 0.8 时,干涉措施下,拥堵消散状态的持续时间约为不采用干涉措施的 50%;当 Pc = 1.0 时,网联车辆的通行能力是纯人工驾驶交通流的2.34倍;分别在非干涉措施和干涉措施下计算拥堵评价指标,与仿真结果进行对比,最大相对误差在5.38%之内,验证了模型的准确性。研究成果对疏散交通拥堵具有重要意义。     

无人帆船循迹航行的控制研究

提出一种适用于无人帆船循迹航行的控制器,并应用于一条1.5m长风帆艇的湖上航行测试。该控制器包含三个独立模块,局部路径策略模块决定帆艇的转向过程;帆自动控制模块根据帆位角和相对风向角的对应关系获取最佳推进力;舵自动控制模块基于从航海经验中提炼的245条模糊控制规则实现航迹调整。1.5m帆艇的湖上测试结果表明,该控制器在多种风场条件下都可有效完成帆艇的循迹航行,具有在无人帆船上实现长程航行的应用前景。     

嵌入式计算机系统在水下航行器的应用

针对小型水下航行器航行和工作特点,论述了采用嵌入式ＭＣＵ与ＥＤＳＰ器件和Ｉ＾２Ｃ总线技术构成的监测与控制系统。     

城市快速公交专用道道路线形设计分析

以汽车的动力特性和通过特性为理论依据,根据目前快速公交专用车辆大都采用低地板大型铰接底地板车辆的现状,结合其容量比一般普通公交大得多的特点,对快速公交专用道的道路线形设计进行分析,提出设计方法。     

Design of safety-oriented control allocation strategies for overactuated electric vehicles

The new vehicle platforms for electric vehicles (EVs) that are becoming available are characterised by actuator redundancy, which makes it possible to jointly optimise different aspects of the vehicle motion. To do this, high-level control objectives are first specified and solved with appropriate control strategies. Then, the resulting virtual control action must be translated into actual actuator commands by a control allocation layer that takes care of computing the forces to be applied at the wheels. This step, in general, is quite demanding as far as computational complexity is considered. In this work, a safety-oriented approach to this problem is proposed. Specifically, a four-wheel steer EV with four in-wheel motors is considered, and the high-level motion controller is designed within a sliding mode framework with conditional integrators. For distributing the forces among the tyres, two control allocation approaches are investigated. The first, based on the extension of the cascading generalised inverse method, is computationally efficient but shows some limitations in dealing with unfeasible force values. To solve the problem, a second allocation algorithm is proposed, which relies on the linearisation of the tyre–road friction constraints. Extensive tests, carried out in the CarSim simulation environment, demonstrate the effectiveness of the proposed approach.