垃圾土力学特性及其路基填筑应用研究

将垃圾土应用于公路路基填筑是实现垃圾土大规模资源化利用的有效途径。本文首先对实际垃圾土进行筛分处理,制得适用于公路路基的垃圾筛余土(简称垃圾土);进而,通过室内试验研究了直接压实垃圾土和固化垃圾土的抗剪强度、CBR值等力学特性;以此为基础,修筑直接压实垃圾土路基试验段,并采用适宜的新型施工工艺修筑固化垃圾土路基试验段,监测路基的工后沉降随时间的变化规律,对比两种垃圾土路基的应用效果。结果表明:固化垃圾土与直接压实垃圾土相比,粘聚力提高1.6~1.9倍,内摩擦角提高30%以上,CBR值提高4.5~5.1倍;固化垃圾土路基的工后沉降比直接压实垃圾土路基降低64.7%,且能够更早地趋于稳定。以上结果证明:本文提出的固化垃圾土路基施工工艺和垃圾土资源化利用途径是可行的。     

横梁端部节点优化

通过有限元计算,对比几种常见的横梁端部连接方式,综合考虑结构整体强度、钢材使用量、舱室空间利用率、施工便利性等方面的影响因素,确定较优的连接过渡方式和过渡结构的参数尺寸,为船舶设计横梁端部节点形式的确定提供参考。     

Labview应用程序开发中使用支持文件相对路径的有关问题

用Labview开发涉及支持文件读写的应用程序时,常会出现调试正常而可执行文件运行时找不到支持文件路径的错误。基于一简单示例,分析了产生此问题的原因并提供了解决问题的思路。     

Commuting and wellbeing: a critical overview of the literature with implications for policy and future research

ABSTRACT

This review provides a critical overview of what has been learnt about commuting’s impact on subjective wellbeing (SWB). It is structured around a conceptual model which assumes commuting can affect SWB over three time horizons: (i) during the journey; (ii) immediately after the journey; and (iii) over the longer term. Our assessment of the evidence shows that mood is lower during the commute than other daily activities and stress can be induced by congestion, crowding and unpredictability. People who walk or cycle to work are generally more satisfied with their commute than those who travel by car and especially those who use public transport. Satisfaction decreases with duration of commute, regardless of mode used, and increases when travelling with company. After the journey, evidence shows that the commute experience “spills over” into how people feel and perform at work and home. However, a consistent link between commuting and life satisfaction overall has not been established. The evidence suggests that commuters are generally successful in trading off the drawbacks of longer and more arduous commute journeys against the benefits they bring in relation to overall life satisfaction, but further research is required to understand the decision making involved. The evidence review points to six areas that warrant policy action and research: (i) enhancing the commute experience; (ii) increasing commute satisfaction; (iii) reducing the impacts of long duration commutes; (iv) meeting commuter preferences; (v) recognising flexibility and constraints in commuting routines and (vi) accounting for SWB impacts of commuting in policy making and appraisal.     

Assessment of fatigue strength of steel butt-welded joints in as-welded condition – Alternative approaches for curve fitting and mean stress effect analysis

Experimental fatigue data for butt-welded joints in as-welded condition and under constant amplitude tensile loading (secondary bending included) were analyzed using the nominal stress system and the notch stress system. Two approaches were used; a standard fitting procedure and minimization of the sum of squared perpendicular distances from a line with a fixed and free slope. In all cases, the latter method gave better agreement between the experimental and predicted fatigue life and fatigue strength. The analyses showed both with all broken specimen data included and with reduced data that the FAT225 curve, as recommended by IIW, might be too optimistic for the notch stress approach in the case of butt-welded joints in as-welded condition. It was also found that use of the local stress ratio instead of the applied stress ratio might explain many issues concerning current observations and apparent inconsistencies in reported literature.     

Investigating Causal Pathways Linking Site-Level Characteristics,Compliance, and Ecological Performance in Caribbean MPAs

A rapidly growing body of empirical evidence has linked improved ecological performance of social–ecological systems (SES) with better compliance with rules governing human activities. Researchers have proposed several key factors that motivate an individual to comply with resource use rules, including deterrence, social pressures, moral inclinations, and perceived legitimacy of rules and responsible authorities. Much of the research on compliance proposes causal mechanisms at the individual human level, but few studies test causal paths with empirical data particularly at the site level. This study tested a proposed pathway for explaining overall compliance rates and ecological performance in SES using data from structured surveys of community members, key informant interviews, policy documents, and coral reef surveys at marine protected areas (MPAs) and their associated human communities in the wider Caribbean. Findings indicate that compliance and other active MPA management interventions positively affect ecological performance, and site-level contextual factors (level of community development and being part of a political network) positively influence significant predictors of overall compliance rates, which include active MPA management and enforced punishments.     

波形钢腹板连续梁桥设计和施工相关问题探讨

大跨度波形钢腹板梁桥是一种新型桥梁结构,因其采用波形钢腹板替代混凝土腹板,相比传统的预应力混凝土连续梁桥,具有轻型、经济等诸多方面的特点。以前山河波形钢腹板连续梁桥为背景,针对设计和施工中的诸如内衬砼、剪力键、横隔板等相关问题进行了分析探讨。     

小直径盾构施工中管片纵向应力监测研究

为了探索小直径盾构法隧道在施工过程中管片纵向应力的变化规律,对北京槐房再生水厂污水隧道管片纵向应力进行了现场监测:将第976环、第1 054环管片分别设为第1和第2监测断面,2监测断面各预埋5个纵向应力计,各监测断面从本监测断面管片安装后即开始监测,当盾构掘进至第1 129环时停止监测。研究表明:1)在管片离开盾尾50环后,其纵向应力波动值小于管片拼装期间应力值的5%。2)在盾构掘进期间,管片距离盾构越远,其纵向压应力值越小。3)在管片拼装期间,管片距离盾构越远,其纵向压应力经历了先增大后减小的过程。4)管片距离盾构108环后,该管片纵向压应力趋近于0.2~0.3 MPa。5)随着盾构推进,管片纵向应力经历了4个阶段的变化过程,即周期性剧烈波动阶段—动态稳定阶段—逐渐衰减阶段—趋于稳定阶段。     

极高地应力软岩隧道超前导洞应力释放及多层支护变形控制技术

为了解决极高地应力软岩隧道大变形控制难题,以兰渝铁路木寨岭隧道岭脊核心段施工为例,通过现场试验和数据分析,得到如下主要结论:1)提出了"先放后抗,抗放结合,锚固加强"的变形控制理念;2)得出了该隧道岭脊核心段"超前导洞应力释放+圆形4层支护结构+径向注浆+长锚杆+长锚索"综合变形控制方案;3)超前导洞应力释放效果明显,正洞累计变形减小幅度约为34%;4)得到了圆形多层支护结构变形规律;5)累计变形均控制在设计预留变形量内,保证了该隧道岭脊核心段大变形控制效果。     

约束对隧道二次衬砌早期温度应力分布的影响

为了解决隧道工程渗水问题,基于某隧道工程,采用MIDAS-GEN对其二次衬砌早期模筑混凝土进行非稳定温度应力场以及周围约束进行研究。研究结果表明:约束可以改变隧道的早期拉应力场的分布,具有外围约束的隧道二次衬砌的拉应力为隧道厚度中间最大,无约束隧道的拉应力为外部最大,约束可以减小隧道外部区域的拉应力,使得远离约束区域的拉应力变大,而无约束隧道的拉应力分布与之相反。根据温度应力分布特点,建议在设计方面适当增大二次衬砌中间与外侧的配筋,在施工方面减小初期支护与二次砌衬之间约束等。