含初始变形船体加筋板有效宽度及剩余极限强度研究

为了评估舰船结构损伤后的剩余强度,对船体加筋板出现初始几何变形后,参与总纵强度的有效宽度和加筋板剩余极限强度进行研究。将加筋板受到垂直于平面压力后的变形,作为其初始几何变形,改变变形的方向和大小,利用有限元软件Ansys对加筋板结构进行线性和非线性分析。定义了板有效宽度计算方法,对不同变形方向和变形幅值时板的有效宽度和加筋板的极限强度进行对比分析,并拟合得到了计算板有效宽度和加筋板极限强度的经验公式。结果表明,初始几何变形会削弱加筋板结构的强度。在对损伤后船体结构强度进行分析和校核时,提出的经验公式可以直接用来计算板的有效宽度和加筋板的极限强度。     

深海变径声阵缆布放回收装置研究

本文提出了基于深海工作站运搭载的变径缆海底布放回收方式，介绍了变径缆海底布放回收装置的主要工作原理和结构组成，完成了布放回收装置主要部套件的设计计算以及和电液控制系统的设计及计算。     

海洋核动力平台全频段舱室噪声预报与降噪方案研究

随着新规范对船舶及海上工作平台提出了更高要求，舱室噪声的控制及优化设计越来越受到人们的关注。本文首先对全频段舱室噪声预报软件——VA One软件统计能量分析理论及软件概况进行了阐述，其次应用该软件对海洋核动力平台进行几何建模与仿真计算。通过对舱室仿真计算结果与标准指标要求的对比分析，在设计阶段提出了海洋核动力平台舱室空气噪声综合治理降噪方案，该措施可以缩短建造周期、降低制造成本，提高海洋核动力平台的舒适性与安全性，具有十分重要的经济效益和社会效益。     

准比例谐振控制算法在三相逆变电源中的应用研究

非线性负载会在三相车载逆变电源系统中引入谐波,损伤用电设备。为了降低逆变电源输出电压谐波含量,文章研究了基于准比例谐振控制算法的谐波抑制方法 ,主要抑制电源输出的5次和7次谐波。通过仿真模型和实物试验,测试了传统瞬时控制方法和准比例谐振控制方法的差别。结果表明,准比例谐振控制方法既能消除输出电压中的特定次谐波,又可满足系统动态响应性能和稳态精度要求,具有良好的谐波抑制效果。     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

Integrated models of land use and transportation for the autonomous vehicle revolution

ABSTRACT

The advent of the autonomous vehicle (AV) will affect not only the transportation system, but also future patterns of land development. Integrated land use and transportation models will be critical tools in assessing the path forward with this technology. Key questions with respect to land use impacts of AVs arise from potential changes in sensitivity to travel and reduced demand for parking. It is an open question whether AVs will induce urban sprawl, or whether spatial economies of agglomeration will mitigate any reductions in travel time sensitivity. The deployment of shared fleets of AVs would likely reduce parking demand, producing yet to be explored impacts on property development within existing urban footprints. We perform a critical assessment of currently operational models and their ability to represent the adoption of AVs. We identify the representation of time in such models as a vital component requiring additional development to model this new technology. Existing model applications have focused on the discrete addition of new infrastructure or policy at a fixed point in time, whereas AV adoption will occur incrementally through time. Stated adaptation surveys are recommended as tools to quantify preferences and develop relevant model inputs. It is argued that existing models that assume comparatively static equilibrium have been convenient in the past, but are insufficient to model technology adoption. In contrast, dynamic model frameworks lack sufficient structure to maintain reasonability under large perturbations from base conditions. The ongoing advancement of computing has allowed models to move away from being mechanistic aggregate tools, towards behaviourally rich depictions of individual persons and firms. However, much work remains to move from projections of existing conditions into the future, to the evolution of the spatial economy as it evolves through time in response to new technologies and exogenous stresses. Principles from complex and evolutionary systems theory will be important in the development of models with the capacity to consider such dynamics.     

福州东(樟林)车辆段工艺设计实践与创新

随着铁路建设的发展,福建省境内货车保有量大幅度增长,货车检修任务量增加迅速。樟林编组站位于福州枢纽,具备良好的扣车条件,在此新建1处货车车辆段将解决整个福建省货车的定期检修工作,而且能保障列车的运行安全,节约运输成本以及货车周转时间。福州东车辆段出入段线下穿既有温福铁路,有利于行车组织、运营安全。总图因地制宜全创新提出存车线(预检预修)与修车库贯通布置方案。充分梳理预检预修与架落车工艺,提出独立设置预检预修设施。论述抛丸除锈设备独立设置、转向架单臂悬挂检修流水线等修车库与联合车库创新设计,福州东(樟林)车辆段设计实现了创新理念和工程实际的协调统一。     

无砟轨道板精调车结构可靠性分析及优化

为提高无砟轨道板精调车结构的设计水平,考虑精调车荷载、几何尺寸和材料弹性模量等设计变量的随机性,对精调车结构进行可靠性分析、可靠性灵敏度分析和可靠性优化。首先,分析并得到精调车结构在串联失效模式下的结构功能函数;然后,运用响应面法和重要抽样方法,分析得到基于确定性优化的精调车结构的失效概率和可靠性灵敏度结果。最后,根据可靠性灵敏度分析结果,对该结构进行可靠性优化。分析精调车结构在可靠性优化前后的差异,结果表明,与确定性优化结果相比,可靠性优化使精调车结构自重增加了3.55%,但可靠度提高为0.999 999 987 7,说明设计变量的随机性对结构性能的干扰大幅减小。     

Online channel strategies under different offline channel power structures for the Belt and Road of China

ABSTRACT

This paper explores the online channel strategies adopted by Chinese manufacturers with regard to the Belt and Road. It also investigates the effect of offline channel power structures and maritime transportation costs on online channel mode selection and pricing strategies. The offline channel power structures are classified into three types, namely, Chinese manufacturer Stackelberg (MS) structure, vertical Nash (VN) structure, and foreign retailer Stackelberg (RS) structure. Furthermore, a game model is developed among the Chinese manufacturer, foreign retailer, and cross-border e-tailer to investigate the interactions among offline channel power structures, maritime transportation costs, and Chinese manufacturers’ online channel mode selection. The results show that Chinese manufacturers’ preferences for the online agency selling mode increases correspondingly with the decrease in their market position and bargaining power. Moreover, foreign retailers can obtain higher profits in the online agency selling mode under the VN structure. However, the level of profit for foreign retailers depends on the intensity of their competition with cross-border e-tailers under the MS and RS structures. Finally, consumers in countries along the Belt and Road can obtain a higher surplus in the online agency selling mode under all of the structures.     

基于STAR-CCM+的螺旋桨水动力性能分析

文章运用公式将P4119螺旋桨二维坐标型值转换成三维坐标型值,导入Gambit2. 4软件建立几何模型。基于STAR-CCM+软件对该桨进行网格划分,设置边界条件和数值,仿真模拟不同进速系数下的转矩系数、推力系数、敞水效率和桨叶表面压力分布。经与试验值比较,误差均在10%以内,验证了计算结果的准确性,能够满足工程需要。