Efficiency evaluation and PM emission reallocation of China ports based on improved DEA models

The emission of particulate matter (PM) and other atmospheric pollutants in port operations and shipping have caused a huge negative impact on the environment. Consequently, how to evaluate the environmental efficiency of ports and put forward corresponding countermeasures on this basis is becoming a more important issue than ever before from the perspectives of the government, academia, and society. We construct three data envelopment analysis (DEA) models to evaluate the environmental efficiency of ports under the circumstances of environmental control, non-environmental control and PM emission through inter-ports cooperation. The innovation of the DEA models constructed in this paper lies in: (1) Setting environmental control parameters to uniformly manipulate the situations of environmental control and non-environmental control, etc.; (2) Allowing non-equal proportional change of input index, expected output and non-expected output index; (3) Setting preference coefficients for ports to admit favorable decisions; (4) Providing a distance formula of expected output for PM emission reallocation. Further, data from 11 major ports in China are collected to compare the expected output under different PM emission standards assuming the situation of environmental control and non-environmental control, port cooperation, and non-cooperative sewage discharge. The empirical results show that: (1) Ports in the eastern China (Shanghai, Ningbo, and Nanjing) have higher port efficiency; (2) Port cooperation can improve the overall expected output but it will lose its edge with the improvement of PM emission standards. (3) Ports follow the same trend of output loss regardless of favorable decisions. In the end, the author makes a summary, puts forward relevant policy suggestions and makes the recommendation for future research.     

基于结果导向的绿色公路评价指标体系研究

本文在梳理绿色公路建设历程的基础上,结合绿色公路提出的时代背景、发展要求及目前评价指标体系存在的问题,借鉴目标管理法(MBO)突出结果导向,面向全寿命周期的三个阶段,从"资源节约"、"生态环保"、"低碳减排"、"智慧高效"等方面构建了包括4个一级指标、25个二级指标的绿色公路评价指标体系。     

刚架拱桥的检测与承载能力评定

对某缺失资料的刚架拱桥进行了病害调查、无损检测及荷载试验,重点对荷载试验进行了分析.通过对结构加载模拟分析、加载等级与方式的确定、变形和自振频率的实测与分析,表明该桥的承载能力不满足规定的荷载等级,且动力性能较差,需要进行加固维修.此方法为该类桥梁的维护使用和加固改造提供参考.     

基于旧沥青路面结构强度评价的FWD弯沉检测技术研究

采用FWD对某高速公路旧沥青路面进行全线弯沉检测,以及对不同路面结构型式进行FWD与贝克曼梁弯沉比对试验检测,以分析评价旧沥青路面结构的强度状况。根据代表性路段旧沥青路面实测的结构层厚度和力学参数代表值,采用公路路面设计程序计算旧沥青路面顶面弯沉值,比较其与将FWD实测弯沉值转化为贝克曼梁弯沉代表值的差异,有益于旧沥青路面的弯沉检测。     

Simulating ad-hoc demand-responsive transportation: a comparison of three approaches

Transport models are used to evaluate new infrastructure and public transport services, varied levels of demand, and new ideas for demand management. Exploring these proposals virtually is easier than implementation and testing in situ. However, existing models are based around traditional forms of transportation. As part of a feature analysis using a case study approach, three different simulation packages (a simple custom-developed package, traffic microsimulation, and agent-based simulation) are used to develop and demonstrate simulations of demand-responsive transportation (DRT) and analyze the advantages and disadvantages of each simulation approach for evaluating DRT. While the simulations display some relational replication (meaning they produce similar relational patterns with respect to certain variables), they do not show distributional replication (that is, the value of the results is not statistically similar), meaning that under- or over-estimation of predicted travel could occur. Recommendations for the application of each modeling approach are made.     

陆军航空兵部队作战指挥能力灰色评估模型研究

通过分析陆军航空兵部队指挥机构的作战指挥活动,构建了陆军航空兵部队作战指挥能力评估指标体系;采用灰色理论和两两比较原理相结合的方法,建立了陆军航空兵部队作战指挥能力评估模型;针对某陆军航空兵部队进行了算例分析,证明了该模型的有效性和可行性。     

舰舰导弹对敌水面舰艇突防能力评估模型初探

舰舰导弹是对水面舰艇攻击的主要武器之一,导弹突防能力是评价导弹性能的重要指标.根据反导武器系统的特点,建立了单发和多发导弹对敌舰攻击的突防能力模型.     

Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

隧道数字化火灾预警系统的在线量化评估

为检查和评价隧道及地下空间火灾预警系统的实际功能,需要一套可行的在线评估手段。根据近年来国内外全尺寸隧道火灾发展曲线的试验结果,提出隧道火情的定义依据;引用运营隧道内准分布式光纤光栅感温火灾探测器的实测数据,证明运营中隧道报警系统的个性化现象;提出合格的数字化报警系统应存在一个在统计学意义上使漏报率和误报率同时达到期望值的合理阈值取值区间;建议以该区间的尺度作为该系统功能完好性的评估指标;对日常隧道运行温度数据的统计分析可估计合理阈值取值区间的下限,对规定条件下的现场点火试验温度数据分析可估计合理阈值取值区间的上限。在隧道运营期该区间尺度可实时在线自动更新。     

乘用车车内噪声与主观评价相关性分析

文章选取了7辆车进行噪声舒适性主客观评价试验,客观评价指标为驾驶员耳边噪声值,主观评价指标为滚动噪声、边棱敏感性等5个,评车师根据试验情况对试验车各指标进行打分并给出总分值。比较了不同试验车速车辆前后排的噪声值,并对主、客观数值进行多元回归分析。