基于单片机的打标机导向控制系统设计

设计了一套基于微处理机控制单元(microprocessor control unit)气动打标机导向控制系统,该系统具有汉字及字符打印功能.该文介绍了系统的硬件组成和软件设计思想.此系统易操作、流程清晰.     

一种单片机控制的水温测试系统

由于现代多样的电子控制技术和电子控制理论的迅猛发展,高精度的机械在各类工业控制系统、生产线等方面的需求越来越大.其中以单片机为核心实现的数字控制器,因其体积小、简便易行等优点,而被广泛应用于各行各业.本文将单片机的温度控制系统作为设计核心,通过温度传感器、单片机等软件系统图,并利用软件编程,从而达到实现水温控制的目的....     

软刚臂单点系泊装置监测预报系统的设计及实现

为进一步保障浮式生产储油装置(FPSO)的作业安全,通过海洋环境条件测量、FPSO运动和单点系泊系统(SPM)状态监测以及理论计算等手段,实现了软刚臂单点系泊监测预报系统的方案设计,并成功应用于渤海油田。经现场应用验证,该系统能够实现对FPSO及SPM运行情况的监测,为作业者提供FPSO操作指导及预警,有效的降低了作业风险。     

Differences in single heavy vehicle crashes at intersections and midblocks

The objective of this research is to identify the factors differentiating between single heavy vehicle collisions at intersections and midblocks by using a binary logit model. Our results show that single vehicle crashes involving heavy vehicle at intersections are more likely to occur on main roads and highways, whereas crashes at midblocks are more likely to occur on divided two‐way roads, roads with special facilities or features (e.g. bridge) and roads with a higher percentage of heavy vehicle traffic. Intersection crashes are also more likely to involve vehicles that are turning left or right, resulting in angle crashes and vehicle overturn, whereas midblock crashes are more likely to involve vehicles on higher posted speed roads. Copyright © 2017 John Wiley & Sons, Ltd.     

海底单层保温管线总传热系数分析

总传热系数K是海底热油管道的运行管理中的一个非常关键的参数.文中通过对中海油涠洲11 -1油田至涠洲12 -1油田之间的海底管道总传热系数进行理论计算,并与投产前根据实际预热数据反算的总传热系数进行对比,得出理论计算的总传热系数与实际预热反算得到的总传热系数相近,同时指出海管接口的散热损失较大,海底管线应对接口部分进行...     

A practical capacity model of a single track line

The paper presents a model for determining the practical capacity of a single track line, i.e. the maximum number of trains which can be run along it in a time unit under the condition that each train enters its bottleneck segment with a definite delay.

The input data used in the model are: geometrical characteristics of the bottleneck segment of the line under study, the intensity and structure of demand expressed by a number of trains which are run over the line in a given time unit, the scenario of traffic running over the line under study and the operational tactics of individual train categories processing on the bottleneck segment.

(Two tactics can be applied in the train processing on the line under study; first, the trains of individual categories are given different priorities in the processing, and second, all the trains have the same priority).

The output results of the model are average delays of trains of each category occurring within the train processing performed on the bottleneck segment of the line under study in a given time unit.     

单轴压缩下不同长度单裂隙岩体能量损伤演化机制

为探寻裂隙岩体变形破坏过程中内在的能量演化机制,基于岩石能量耗散理论和室内试验数据,研究了单轴压缩条件下单裂隙岩体变形破坏过程中各能量指标(总能量、弹性应变能及耗散能)演化规律,分析了裂隙长度变化对岩样力学特性、破坏模式、各能量指标及峰前能量突变幅度的影响规律.研究结果表明:裂隙岩体的峰值强度、峰值应变及弹性模量均随裂...     

基于改扩建工程的沥青中面层标高控制技术研究

高速改扩建工程中,沥青中面层摊铺时新老路面标高存在高差、拼接接缝、横坡不一致等问题,严重影响上面层施工质量.结合济青高速改扩建工程具体案例,根据摊铺机单机大宽度一次性同步调平与摊铺的设计思路,对路面不同高差的松铺厚度、摊铺机夯锤振幅以及压实机具组合等标高控制关键技术进行了系统研究和参数调整.工程实践表明,该施工方案应用...     

高速公路连续箱梁桥独柱墩横向抗倾覆计算及安全性评估

连续梁桥由于结构刚度大、桥面变形小、动力性能好、变形曲线平顺、有利于高速行车等优点,是中小型桥梁的主要结构形式之一,得到了广泛的应用和发展。但是由于超载、偏载以及支座布置不合理等原因,近年来我国连续梁桥出现了多例整体失稳的事故,且事故大多出现在独柱墩连续梁桥上。针对最近发生的独柱墩桥梁倾覆事件,采用有限元程序Midas Civil对拟建的武深高速公路项目中连续箱梁桥独柱墩抗倾覆系数及独柱墩处箱梁支座转角进行验算,并与规范及《广东省高速公路独柱墩连续箱梁桥横向抗倾覆安全性评估验算指导意见》中要求的指标进行对比,对连续箱梁桥独柱墩横向抗倾覆安全性进行合理评估。     

准饱和土中单桩竖向荷载作用下的动力响应

根据Biot饱和多孔连续介质波动方程,基于Bardet对准饱和土的假设,提出了准饱和土二相介质波动方程;运用Helmholtz矢量分解和传递、透射矩阵法(TRM)推导出准饱和土中层状半空间受竖向荷载作用下的动力响应表达式;利用Muki虚拟桩法,在层状半空间建立了桩和准饱和土相互作用的第二类Fredholm积分方程,通过离散的数值积分方法求解积分方程,讨论了准饱和土中单桩竖向动力响应问题.算例分析表明,准饱和土中桩顶竖向阻抗随饱和度的减少而增大,与饱和土地基相比,明显偏大;桩侧孔压随饱和度的减小而增大,并沿着桩长迅速衰减;桩顶位移幅值在频率较小时变化明显,饱和度越小,位移峰值越大,当频率较大时,饱和度的变化对振幅的影响不大.