混凝土搅拌运输车主、副车架的设计

对混凝土搅拌运输车的主、副车架进行了定性和定量的受力分析,从中推导出主、副车架的简化强度计算方法和强度校核公式。并以SX5254GJBDM364混凝土搅拌运输车为例进行了实例分析和计算。     

清水冲刷河床调整过程试验研究

通过沙质河床清水冲刷水槽试验,对河床纵剖面的调整、沙波尺度、粗化层厚度及其与沙波运动关系、粗化层级配、推移质级配等进行了观测分析,进一步揭示了清水冲刷,河床重建平衡的机理。水槽试验表明,沙质河床清水冲刷,上游河段比降调平,床沙粗化,沙波发育,河床阻力增大,水深增大,流速减小,导致河床供沙能力削弱,输沙能力降低,冲刷向不冲刷转化。     

悬拼梁段长线台座吻合法预制施工关键技术探讨

深圳湾公路大桥非通航孔桥梁体施工,设计为分段预制,海上拼装,预制施工线形控制和梁段间吻合匹配,这些是其关键技术。重点介绍采用长线台座吻和法预制梁段时吻和匹配施工工艺,线形控制方法,台座设计检算及施工中易出现的问题等。     

Using longitudinal methods for analysis of a short-term transportation demonstration project

This paper documents an application of panel, or longitudinal data collection in the evaluation of a TSM (Transportation Systems Management) demonstration project. The project was a four-week demonstration of staggered work hours in downtown Honolulu during February–March 1988. The 4 wave panel survey elicited commuting experiences of approximately 2,000 downtown employees at two week intervals before and during the project. The sample involved both employees who participated in the project by shifting their work hours, and those who did not. The panel survey was augmented by floating-car observations of travel times on major routes into downtown Honolulu on the same four dates.The purpose of the analysis was to determine whether employee commute times were affected, and if so, how these changes were distributed among various employee segments. Two methods were used. First, travel time changes were estimated using paired t-tests. Second, regression equations were used to estimate project time savings as a function of trip length, route, and location of residence. Results show that travel time savings due to the project were typically small, less than ten percent. Nonparticipants experienced greater savings than participants, and some segments of participants experienced longer travel times during the project. The panel method proved to be an effective way to measure project travel time impacts and shows that the method is appropriate in short time applications.Presented at the Annual Meeting of Transportation Research Board, January 7–11. 1990, Washington, D.C.     

金塘大桥大型箱梁安装施工技术

本文结合金塘大桥的特点,介绍了金塘大桥60m箱梁安装的施工方法、施工技术以及采用的关键设备及其性能,以期为国内同类桥梁的施工和同类大型设备的使用提供经验。     

浅谈西姚互通匝道桥现浇预应力钢筋混凝土箱梁施工

介绍了现浇式预应力钢筋混凝土西姚互通匝道桥箱梁施工,提出了在施工中应当注意的一些问题,并以自己多年的技术工作经验,提出了具体的技术对策,可供技术同行参考。     

水荷载预压和砂袋预压在现浇箱梁高支架预压中的应用

本文介绍了水荷载预压和砂袋预压在天(津)汕(尾)国家重点高速公路梅州西环高速跨G206国道高架桥施工中的应用,以及相应的基础处理方法和实验成果,并对预压效果进行了比较和总结。     

小半径曲线脱轨原因分析及对策措施

通过对小半径曲线常见的悬浮、轨道破坏、爬轨 3种脱轨情况的特点分析 ,从工务角度着重论述小半径曲线上的超高顺坡率、轨距超限、方向水平及其反相位复合不平顺三者对行车安全的影响 ,并提出预防整治的对策措施。     

高中速客专和高低速客货共线铁路不同坡段组合的动力学性能之比较研究

本文运用车辆-轨道耦合动力学新理论,仿真计算了列车以不同速度匹配通过不同类型纵断面时动力学性能的各项指标,并且根据现行铁道机车车辆动力学性能评定规范加以评价。结果表明:在本文设定的不同类型纵断面条件下,如单面坡划为多坡段或凹型坡加设分坡平段或凸型坡加设分坡平段,无论是高中速客车还是高低速客货混跑,采用新设计方案计算得到的指标略大于采用原设计方案得到的相应值,但差异不明显;所有方案下,除个别指标外,安全性指标均未超过合格限值,平稳性指标属优良等级。     

船舶操纵仿真中图谱数值化方法的研究

在船舶操纵仿真中涉及大量的图谱转换工作,传统的图谱处理方法在精度和工作量上存在着一对矛盾。本文试图通过应用正弦小波拟合方法来替代传统折线方法,并在某些图谱上得到验证,可望在类似图谱数值化上得到推广和应用,以提高计算精度和减少计算工作量。