Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

U型管式换热器的质量控制

U型管式换热器属于列管换热器的一种,被广泛应用在循环水冷却高温气体装置中。根据U型管式换热器的结构特点和技术原理,针对设备在使用过程中可能出现的问题,在整个材料采购和制造过程中,对换热器中管板制造加工、U型管成形及换热管与管板的焊接等制造的关键和难点予以质量控制,保证产品质量,使设备按设计要求制造完毕后安全有效地运行。     

LNG储罐罐壁工程质量缺陷及控制措施

LNG储罐是LNG接收站中关键的设备之一,其工程质量非常重要。为使罐壁施工质量达到良好状态,可事先采用施工用的混凝土、钢筋和DOKA模板等施工材料建造小段试验墙,根据这段试验墙可以提前发现工程可能出现的缺陷,这些缺陷包括模板错缝、预埋件凹陷、混凝土表面局部气孔麻面、墙体裂缝、漏浆及混凝土表面色差等,对这些缺陷产生的原因进行分析并采取相应的控制措施,以确保罐壁施工顺利且高质量进行。     

Evaluating the effects of green port policy: Case study of Kaohsiung harbor in Taiwan

The paper evaluates the effectiveness of strategies designed to reduce these pollutants in port areas, based on a newly developed assessment model to calculate emissions. The case study found that the strategy of reducing the ship’s speed to 12 knots is most effective in cutting fuel consumption and costs, as well as emissions. Adopting an onshore power supply system could reduce CO₂ emission by 57.16% and PM by 39.4%. By adopting the strategies of both reduced speed and cold ironing emissions control, a reduction in emissions of 71% to 91% can be achieved with a 20 nautical mile reduced speed zone. Therefore, the goals of reductions in emissions to improve port areas air quality could be achieved through adopting a green port policy in the future.     

冲孔灌注桩施工质量控制要点

冲孔灌注桩因其适应性强、成本适中、施工简便等优点,广泛应用于公路桥梁工程建设中。文章详细介绍了冲孔灌注桩成孔、成桩施工各环节的质量控制要点,为类似桩基施工提供技术参考。     

浅埋暗挖地铁隧道施工监测方法

文章以重庆市地铁一号线大坪车站临时施工便道为例,对在浅埋、软岩条件下既有隧道拆除采用工字钢支顶、风镐破岩,新建隧道采用台阶法环形开挖预留核心土、人工非爆破开挖的施工方法,通过现场监控量测,得出最大地表沉降仅为3.82mm,表明采用合理的施工方法可以减少地表沉降。     

土基模量对沥青路面性能影响分析

从沥青路面结构层施工质量控制、半刚性基层反射裂缝扩展、路面疲劳寿命三个方面分析了土基模量对半刚性基层沥青路面性能的影响规律,提出了沥青路面土基模量的合理设计和施工控制措施。     

路基压实质量的影响因素分析

针对公路路基压实质量在公路施工中的重要性,结合已有的工程施工情况,总结出在路基压实中应注意的问题,并从筑路材料、压实设备、压实工艺等方面进行了分析和讨论。     

机械类大学生创新实践及其效果分析

结合全国大学生机械创新设计大赛这一创新实践活动,阐述了通过加强创新实践,可以在一定程度上提高学生的就业竞争力和教师的实践能力,还可以增加学校的教学科研成果数量.实践表明,加强创新实践离不开学校的政策支持.     

Did Chinese cities that implemented driving restrictions see reductions in PM10?

Imposing driving restrictions is becoming increasingly popular as a policy intended to control urban air pollution. Existing studies on this topic offer highly mixed observations, and each study tends to focus on only one city. In this paper, we used 11 Chinese cities with driving restrictions as the treatment group, and compared them to other cities that did not implement the policy. Based on a propensity score matching and difference-in-difference analysis, we found no evidence of a decrease in PM10 concentrations in cities after they implemented driving restrictions. This finding may be attributed to an increase in the number of cars in these cities after implementing driving restrictions, but we also found no evidence of an improvement in air quality for a given number of cars after implementation of the policies.