Understanding time use: Daily or weekly data?

The appropriate duration of time diaries as a source of time use data is analyzed in a structured way. Nine detailed European surveys based on seven-days diaries are used in order to study different dimensions of data quality, duration and variability of activities, and modeling capabilities. Pseudo diaries of 1, 2 (one week, one weekend) and 3 (one week, both weekend) days are constructed to further analyze these issues, selecting the seven-days diaries data as a benchmark. Comparative results show that two and three-days weighted surveys seem to be an adequate surrogate for the information obtained in weekly surveys that capture a basic work–leisure cycle.     

基于价值工程的全生命周期趸船材质方案比选研究

将趸船整个生命周期过程中的技术先进性、经济合理性和环境协调性有机地融合为一体,基于价值工程理论提出趸船材质方法比选。实例表明在千岛湖这样的大吨位船舶碰撞概率很小的水域,采用混凝土趸船明显优于钢质趸船。     

Balancing energy consumption and risk of delay in high speed trains: A three-objective real-time eco-driving algorithm with fuzzy parameters

Eco-driving is an energy efficient traffic operation measure that may lead to important energy savings in high speed railway lines. When a delay arises in real time, it is necessary to recalculate an optimal driving that must be energy efficient and computationally efficient.In addition, it is important that the algorithm includes the existing uncertainty associated with the manual execution of the driving parameters and with the possible future traffic disturbances that could lead to new delays.This paper proposes a new algorithm to be executed in real time, which models the uncertainty in manual driving by means of fuzzy numbers. It is a multi-objective optimization algorithm that includes the classical objectives in literature, running time and energy consumption, and as well a newly defined objective, the risk of delay in arrival. The risk of delay in arrival measure is based on the evolution of the time margin of the train up to destination.The proposed approach is a dynamic algorithm designed to improve the computational time. The optimal Pareto front is continuously tracked during the train travel, and a new set of driving commands is selected and presented to the driver when a delay is detected.The algorithm evaluates the 3 objectives of each solution using a detailed simulator of high speed trains to ensure that solutions are realistic, accurate and applicable by the driver. The use of this algorithm provides energy savings and, in addition, it permits railway operators to balance energy consumption and risk of delays in arrival. This way, the energy performance of the system is improved without degrading the quality of the service.     

Validation of an extended discrete first-order model with variable speed limits

This paper validates the prediction model embedded in a model predictive controller (MPC) of variable speed limits (VSLs). The MPC controller was designed based on an extended discrete first-order model with a triangular fundamental diagram. In our previous work, the extended discrete first-order model was designed to reproduce the capacity drop and the propagation of jam waves, and it was validated with reasonable accuracy without the presence of VSLs. As VSLs influence traffic dynamics, the dynamics including VSLs needs to be validated, before it can be applied as a prediction model in MPC. For conceptual illustrations, we use two synthetic examples to show how the model reproduces the key mechanisms of VSLs that are applied by existing VSL control approaches. Furthermore, the model is calibrated by use of real traffic data from Dutch freeway A12, where the field test of a speed limit control algorithm (SPECIALIST) was conducted. In the calibration, the original model is extended by using a quadrangular fundamental diagram which keeps the linear feature of the model and represents traffic states at the under-critical branch more accurately. The resulting model is validated using various traffic data sets. The accuracy of the model is compared with a second-order traffic flow model. The performance of two models is comparable: both models reproduce accurate results matching with real data. Flow errors of the calibration and validation are around 10%. The extended discrete first-order model-based MPC controller has been demonstrated to resolve freeway jam waves efficiently by synthetic cases. It has a higher computation speed comparing to the second-order model-based MPC.     

LED灯具在高速列车照明系统中的应用

随着我国高速铁路事业的发展,旅客对车内照明环境品质的要求越来越高,在我国高速列车照明设计中广泛采用LED灯具作为光源。通过对高速动车组车载灯具与25T型列车传统车载灯具的测试对比,总结出LED灯具在发光效率等方面相对于传统灯具的优势,为高速动车组室内照明设计提供依据。     

Integrated vehicle and powertrain optimization for passenger vehicles with vehicle-infrastructure communication

This research proposes an optimal controller to improve fuel efficiency for a vehicle equipped with automatic transmission traveling on rolling terrain without the presence of a close preceding vehicle. Vehicle acceleration and transmission gear position are optimized simultaneously to achieve a better fuel efficiency. This research leverages the emerging Connected Vehicle technology and utilizes present and future information—such as real-time dynamic speed limit, vehicle speed, location and road topography—as optimization input. The optimal control is obtained using the Relaxed Pontryagin’s Minimum Principle. The benefit of the proposed optimal controller is significant compared to the regular cruise control and other eco-drive systems. It varies with the hill length, grade, and the number of available gear positions. It ranges from an increased fuel saving of 18–28% for vehicles with four-speed transmission and 25–45% for vehicles with six-speed transmission. The computational time for the optimization is 1.0–2.1 s for the four-speed vehicle and 1.8–3.9 s for the six-speed vehicle, given a 50 s optimization time horizon and 0.1 s time step. The proposed controller can potentially be used in real-time.     

Point-to-point speed enforcement systems: Speed limits design criteria and analysis of drivers’ compliance

Point-to-point (P2P) speed enforcement is a relatively new approach to traffic law enforcement. Its technology allows vehicles whose average speed exceeds the speed limit over the controlled section to be fined. It therefore encourages compliance over distances longer than those where spot enforcement policies have been in place.In this paper, a procedure for consistently setting speed limits with such enforcement systems is proposed. Such a method has been applied to design the speed limits on two motorways in the district of Naples, Italy, where P2P enforcement systems became operational in 2009 and 2010. The speed limits, which were set using the Italian geometric design standard to assess vehicle stability and stopping sight distance, have been compared with those provided by using well-known international standards.The impact of the newly designed speed limits and of the P2P enforcement system on drivers’ speeding behaviour has been quantified for each highway section and vehicle type. In fact, accurate measurements of the average travel speeds of each vehicle crossing the enforced sections, before and after the activation of the system, were available. The migration from the old speed limits with spot speed enforcement to the new approach resulted in a notable increase in drivers’ compliance to the speed limits with a remarkable decrease in both the average of individual speeds and in their standard deviation.In addition, the analysis of 3 years of data shows that a gradual adaptation of drivers’ behaviour to the system took place. In particular, a decreasing compliance to the speed limits points to a non-optimal system management. Finally, the results of a revealed preference survey allowed us to make a behavioural interpretation regarding the significantly different impacts measured on the two motorways.     

对地铁信号系统列车运行速度制约因素的探讨

信号系统是保障地铁运行安全及提高运行效率的重要设备,列车超速防护功能是信号系统一个非常关键的功能。信号系统防护下的列车运行速度由车辆、线路、轨道、限界及信号系统等条件共同决定。由于相关专业对信号系统安全制动模型不了解,在实际工程中易造成"速度浪费"现象。从信号系统安全制动模型的原理出发,对车辆、线路、轨道、限界等专业对列车运行速度的制约因素进行分析,提出建议。     

Robust traffic assignment model: Formulation,solution algorithms and empirical application

ABSTRACT

The deterministic traffic assignment problem based on Wardrop's first criterion of traffic network utilization has been widely studied in the literature. However, the assumption of deterministic travel times in these models is restrictive, given the large degree of uncertainty prevalent in urban transportation networks. In this context, this paper proposes a robust traffic assignment model that generalizes Wardrop's principle of traffic network equilibrium to networks with stochastic and correlated link travel times and incorporates the aversion of commuters to unreliable routes.

The user response to travel time uncertainty is modeled using the robust cost (RC) measure (defined as a weighted combination of the mean and standard deviation of path travel time) and the corresponding robust user equilibrium (UE) conditions are defined. The robust traffic assignment problem (RTAP) is subsequently formulated as a Variational Inequality problem. To solve the RTAP, a Gradient Projection algorithm is proposed, which involves solving a series of minimum RC path sub-problems that are theoretically and practically harder than deterministic shortest path problems. In addition, an origin-based heuristic is proposed to enhance computational performance on large networks. Numerical experiments examine the computational performance and convergence characteristics of the exact algorithm and establish the accuracy and efficiency of the origin-based heuristic on various real-world networks. Finally, the proposed RTA model is applied to the Chennai road network using empirical data, and its benefits as a normative benchmark are quantified through comparisons against the standard UE and System Optimum (SO) models.     

多元评价体系组合模型在铁路隧道变形预测中的应用

为克服传统预测模型结构单一、预测精度及稳定性不足等缺陷,提出多元体系组合预测模型的建模思路。首先,基于支持向量机、BP神经网络及ARMA模型3种单一预测模型,构建铁路隧道变形预测体系;再以均方根误差、误差平方和及平均绝对误差等为评价准则或指标,构建各预测结果的误差评价体系,求解各单项预测模型的权值贡献指数,得到最优组合权值;然后利用后验差检验、残差检验和关联度检验构建预测精度校验体系,对组合预测结果进行检验,评价预测模型的有效性;最后,结合工程实例,对多元体系组合预测模型在特大断面隧道中的变形预测效果进行检验。结果表明:多元评价体系组合模型预测相对误差值均小于2%,具有较高的预测精度,且较单一预测模型具有更高的预测精度,也一致通过相关检验,验证了多元体系组合预测模型的有效性。