“天麒”船自动三缆定位控制系统的设计与实现

为满足绞吸式挖泥船在风浪条件下的施工需求,针对三缆定位控制系统进行了深入研究,开发出一套适合绞吸式挖泥船的自动三缆定位系统,并将该系统成功应用于“天麒”船。该系统采用双PID控制思想,对变频器速度环进行有效控制,可以使得船舶在步进过程中既能保证按施工线方向行走,又可减少风浪流对定位过程的影响,从而实现船舶快速定位,提高施工效率。     

大型船舶重力抛锚控制系统设计

结合船用锚机使用要求和结构特点,研制一种闭环重力抛锚控制系统,使船舶重力抛锚过程实现自动控制;给出抛锚控制函数及其物理意义;开展实船抛锚试验。结果表明,所研制的系统能有效完成重力抛锚自动控制,满足船舶使用要求。     

山区峡谷非均匀风场下大跨度斜拉桥静风稳定性分析

为研究山区峡谷地形下非均匀风场对大跨度桥梁静风稳定性的影响,以一座跨越典型山区峡谷地形的大跨度斜拉桥为工程背景,首先,采用计算流体动力学（CFD）软件Fluent对桥址区地形的风场特性进行分析,计算出沿主梁方向的非均匀风速和非均匀风攻角分布;然后,采用ANSYS APDL技术实现能考虑非均匀风速和非均匀风攻角下大桥静风稳定性的非线性分析方法。在此基础上,综合考察非均匀风攻角分布、非均匀风速分布、非均匀风速非均匀风攻角分布等风场条件对大桥静风稳定性的影响,分析各工况下主梁的静风变形与跨中处拉索刚度变化。研究结果表明：与均匀风场条件下的静风响应不同,非均匀风攻角或非均匀风速下主梁静风响应最大值点位于风荷载峰值点与跨中之间,在针对非均匀风场下大桥的静风稳定性分析时,应更注重静风响应最大值点而不是跨中处;非均匀风攻角下大桥的静风失稳临界风速要远低于均匀风攻角的静风失稳临界风速,且其静风稳定性能主要受最大风攻角而不是主跨部分非均匀风攻角的平均值来控制;非均匀风速下大桥的静风失稳临界风速主要由主跨部分的风速平均值和最大值共同影响;主梁的竖向位移和扭转角形状主要由风攻角因素来控制,而横向位移的变化规律相对较独立,其形状基本上以跨中线对称,且其值主要由风速因素来决定。     

混行非机动交通流车速离散特性研究

我国城市非机动道路内的交通现象通常为电动自行车与人力自行车混合行驶状况,车速离散是该类道路内交通流的重要特征。结合杭州市的调查数据,采用统计学方法定量分析混合非机动交通流车速离散特性,分别建立车速离散特性评价参数与各主要影响因素之间的回归关系。结果表明,归一化车速离散度分别与各影响因素成线性回归关系;除电动自行车比例因素之外,车速变异系数与其它各因素成线性回归关系。     

新建隧道爆破施工振动影响研究

文章以新建库鲁塔格隧道爆破施工为例,通过进行爆破振动测试,分析爆破施工过程中既有隧道的爆破振动速度与微应变之间的相互关系,研究新建隧道爆破施工对临近既有隧道的影响。     

Evaluating the effects of green port policy: Case study of Kaohsiung harbor in Taiwan

The paper evaluates the effectiveness of strategies designed to reduce these pollutants in port areas, based on a newly developed assessment model to calculate emissions. The case study found that the strategy of reducing the ship’s speed to 12 knots is most effective in cutting fuel consumption and costs, as well as emissions. Adopting an onshore power supply system could reduce CO₂ emission by 57.16% and PM by 39.4%. By adopting the strategies of both reduced speed and cold ironing emissions control, a reduction in emissions of 71% to 91% can be achieved with a 20 nautical mile reduced speed zone. Therefore, the goals of reductions in emissions to improve port areas air quality could be achieved through adopting a green port policy in the future.     

Expertise in decision-making for large infrastructure projects: from UK trunk roads to High Speed Rail 2

At the decision-making stage, a large-scale infrastructure project is essentially a broad concept, and this means the expert analyses will differ from each other and become contested over time, leading to the emergence of rival narratives. It is only where there is a limited range of expert analyses that the bases for decision-making will remain relatively clear-cut. Over time the contested nature of expertise can significantly inhibit the construction of effective narratives, either for or against the project, and also make decision-making more complex and problematic. Decision makers may also seek greater clarification through the construction of narratives that rise above these disputed areas of expertise, and the scientific evidence becomes less important. This paper examines the changing nature of contested expertise through a comparative analysis of political decision-making between UK trunk roads policy and the case of High Speed Rail 2, through the framework of epistemic communities.     

Intermittent automatic train protection using an infrared system

Automatic train protection (ATP) is a vital part of the signalling system that prevents collisions between trains, especially on densely trafficked lines. Conventionally, ATP uses a transponder to communicate between an onboard train device and a trackside device. In Indonesia, ATP is not yet implemented and all trains are currently operated by drivers. It has now become a necessity to install ATP in Indonesia in order to protect train operations. However, as in many tropical and developing countries there are some environmental problems, especially heavy rain, as well as the theft of trackside equipment that influences performance. Installed trackside devices must therefore meet certain criteria such as low-cost configuration, minimalized devices on the track, ease of maintenance, etc. To address the necessity of ATP and to meet these criteria for trackside devices, we develop ATP using an infrared system. This type of ATP – the intermittent ATP system – consists of onboard devices and infrared sensors as trackside equipment. This approach to ATP offers a cost-effective solution and ensures the safety of train movements.     

高速船尾部喷水推进局部振动分析

针对高速船尾部采用喷水推进装置的局部振动问题,建立了船体尾部包含喷水推进泵的有限元模型。考虑附连水质量的影响,将船体尾部离散成甲板,底板,喷水推进泵,尾板等局部结构,采用规范经验公式估算以及有限元分析的方法分别对各局部结构的板、板格、板架进行固有频率计算,将其结果与轴频和叶频激励频率进行储备频率校核,判断尾部采用喷水推进装置在振动问题上是否满足规范标准,并为下一步的船体设计提供参考。     

重载情况下船舶及主机加速问题分析

针对目前一些船舶在恶劣海况下遇到的加速问题,以及通过转速禁区时间过长的问题,从螺旋桨匹配和主机内部设计两方面进行原因分析。围绕转速禁区功率裕度,结合相关案例,从轻螺旋桨裕度、转速禁区及MAN主机输出扭矩能力等方面入手,提出改进措施。