A G/G(n)/C/C state‐dependent simulation model for metro station corridor width design

Metro station corridor and passengers are described as a G/G(n)/C/C state‐dependent queuing system with a general random arrival interval G and a general random and state‐dependent service time G(n) to offset the shortcomings in existing design methods. The corresponding G/G(n)/C/C state‐dependent discrete event simulation model is developed, and its high‐fidelity is tested. Then the optimization algorithm based on the simulation model is designed to determine corridor width. The proposed simulation optimization method and the existing analytical optimization methods, based on M/G(n)/C/C and D/D/1/C queuing models, are applied to design corridor width in a numerical example of 48 combinations of passenger flow rates and level of service (LOS). The designed corridor widths are tested in a micro‐simulation model, and the performance measure is compared. The result shows that the corridor widths obtained by the new method are 0.357 m (7.4%) larger than that of the other two methods on average; the area per passenger of the new method increases 10.53% and 11.63%, respectively, compared with that of the other two methods; the widths designed by the new method satisfy the requirement of LOS under various passenger flows, whereas 93% of the corridor widths obtained by the other two methods fail to meet the requirement of LOS, and the corridor widths designed by the new method have high elasticity coefficients of LOS‐width. Copyright © 2015 John Wiley & Sons, Ltd.     

不确定性时滞系统时滞相关鲁棒镇定

讨论了具有状态时滞的数值界不确定性线性系统的时滞相关鲁棒控制问题.将矩阵分解的思想应用于线性时滞系统的控制综合,利用Lyapunov-Krasovskii泛函方法,通过牛顿-莱布尼茨各项相互关系引入"0"阵,得到了系统的一种新的经过状态反馈控制后可鲁棒镇定的、基于LMI的、保守性较低的时滞相关条件.该方法既不需要对原系统进行模型变换,也不需要对交叉项进行界定.用算例说明了该方法的有效性.     

基于遗传算法的混凝土热学参数反分析与反馈研究

混凝土热学参数主要是通过室内试验得到的,不能真实地反应施工现场的混凝土热学性能.针对这一问题,结合工程现场实测的混凝土温度,利用遗传算法对混凝土温度场进行反演计算,并将计算值和实测值进行对比,分析计算结果的合理性,得到反映混凝土真实热学性能的参数.结合混凝土温度场应力场的基本原理和水管冷却的精确算法,利用这些参数,通过三维有限元仿真计算程序对施工现场混凝土温度场进行反馈计算.确定温控防裂措施,指导后续施工.结果表明t该方法可成为替代用室内试验和经验公式选取热学参数的有效途径.     

机车电路动态图形仿真系统开发平台的研究

针对现有机车电路过程的计算机动态图形仿真系统不能为机车设计人员使用,只能用于学员培训,且由内机型的迅速变化,程序人员不得不重复笥地编写和输入逻辑控制程序,费时费力这一现状,提出了根据输入电路原理图由计算机自动生成,逻辑仿真文件的开发平台的设计方法。     

永电模式的形成和发展

本文通过对“永电模式”形成和发展的分析 ,提出国有企业管理和改革的根本出路     

水泥砼路面机械化施工系统理论应用研究(Ⅰ)——系统数学描述

根据高等级公路水泥砼路面机械化施工工艺,利用随机服务系统理论,提出了水泥砼路面机械化施工系统的数学模型,动态地描述了水泥砼路面机械化施工系统机械运行的一般规律．     

基于状态空间方法的显式GPC算法全局收敛性分析

采用状态方程的方法给出了基于ＣＡＲＭＡ模型的显式,ＧＰＣ算法的稳定性及收生证明,辨识算法采用增广最小二乘法。     

普速铁路繁忙干线钢轨服役现状的调查分析

针对普速铁路繁忙干线,测试了累计通过总质量800～1100 Mt线路钢轨的硬度、廓形、磨耗和锈蚀深度、焊接接头平直度,调研了钢轨使用和伤损情况.结果表明:钢轨踏面中心硬化率不大于7％;打磨后钢轨实测廓形与60N标准廓形在轮轨接触区域竖向偏差不大于0.2 mm;钢轨垂直磨耗在3.0～5.7 mm,轨底角边缘厚度在8.35...     

粘性土物理状态与力学特性间的灰色关联度分析

鉴于实际工程中,低液相粘性土之一的亚砂土的稠度划分与其力学特征之间普遍存在矛盾的现象,采用灰理论中的关联度分析,对粘性土物理状态指标与力学特征指标之间的相关性进行分析是比较合理贴切的,且对今后的研究与工程应用有重要的参考价值.     

Flexural fatigue behavior of butt-welded circular concrete-filled double skin steel tube (CFDST)：Experimental study and numerical modeling

Detailed understandings on the fatigue behavior of the concrete-filled double skin steel tubes (CFDSTs) under multiaxial stress states are essential to promote their applications in marine structures. A systematical investigation consisting both the experimental study and the according numerical modeling has been conducted. Physical tests were carried out to investigate the flexural fatigue behavior of the butt-welded hollow steel tubes (HSTs), concrete-filled steel tubes (CFSTs) and CFDSTs, in which the development of fatigue cracks and the fatigue life were captured. The feasibility of applying the existing S–N curves originally obtained from the HSTs to the constitutive steel tubes within the CFDSTs has been consequently verified. A two-stages simulation method was developed to analyze the full range development of fatigue cracks based on both the damage mechanics and the extended finite element method (XFEM). The influence of the multiaxial stress states on the fatigue behavior for the constitutive steel tubes was studied quantitatively, considering the offshore application scenarios where the steel tubes within the CFDSTs were subjected to larger external hydrostatic pressure or internal transmitted content pressure. The results show that the existence of the infilled concrete can effectively improve the fatigue behavior of the steel tubes. The life prediction models for both the fatigue crack initiation stage and propagation stage have been proposed, where the crack initiation life of the steel tube may reduce by 30% when its stress triaxiality increases from 0.36 to 0.48.