基于可拓切换控制方法的智能车辆车道保持系统研究（双语出版）

针对道路曲率变化范围较大时，智能车辆在大曲率道路工况车道保持控制精度低的问题，提出一种基于可拓切换控制理论的智能车辆车道保持控制系统，该车道保持系统由上层可拓控制器和下层控制器两部分组成。在上层可拓控制器中，通过车道线检测得到车辆相对于道路的位置信息和道路曲率信息。根据可拓集合理论，选取预瞄点处横向位置偏差和前方道路曲率值作为可拓集合的特征值并划分可拓集合，求解关联函数，并根据关联函数值将车辆-道路系统状态分为经典域、可拓域和非域。在下层控制器中，在经典域采用基于横向位置偏差和航向偏差的PID反馈控制器，在可拓域中采用基于前方道路曲率的PID前馈-反馈控制器，非域中车辆-道路系统处于完全失控状态，采取紧急制动。2种仿真工况结果表明：相比于单一PID反馈控制，提出的车道保持控制系统，有效抑制了在大曲率道路下的跟踪误差值，提高了智能驾驶汽车在时变曲率的道路工况下车道保持控制精度和工况适应性。     

Robust optimization for the correlated MIMO downlink with imperfect channel state information

To reduce the performance deterioration induced by imperfect channel state information (CSI) in cor-related multiple input multiple output(MIMO) downlink, the linear transmit/receive filters should be optimized to be robust to imperfect CSI. A sub-optimization algorithm based on minimizing sum MSE conditional on available imperfect CSI estimates subject to a per-user power constraint is proposed. The algorithm adapts the existing MMSE algorithm from uncorrelated single-user MIMO system with perfect CSI to correlated MIMO downlink with imperfect CSI. Simulation shows that the suboptimal algorithm can effectively mitigate the performance loss induced by imperfect CSI and has a good convergence performance. In addition, the effect of spatial correlation on the performance of the proposed algorithm is also simulated.     

论新形势下大型国有施工企业的安全管理

近年来,中国的经济增长和结构调整,及加速城市化进程等方面的需求,极大地增加了对于基础设施服务的市场需求和投资需求,国家基建投资大幅上扬,建筑企业的安全生产管理工作压力突显。该文结合当前建设市场形势下建筑施工企业尤其是国有施工企业中出现的安全管理问题,提出了一些对策性研究,以便和同行交流。     

基于高频PWM整流逆变技术的能量回馈装置研究

结合高频PWM整流逆变电路高功率因数、低谐波特性,提出了一种可实现再生能量回馈利用的装置。文中介绍了该装置的主电路拓扑结构和工作原理,并根据它的等效电路和功率平衡关系建立了数学模型。从实现单位功率因数有源逆变控制出发,设计了双闭环直接电流控制系统,利用Ziegler-Nichols整定算法得到内外环PI调节器的参数。通过Matlab/Simulink仿真表明,方案设计合理,控制系统有良好的动静态性能。     

Nonlinear feedforward–feedback control of clutch-to-clutch shift technique

To improve the shift quality of the vehicle with clutch-to-clutch gear shifts, a nonlinear feedforward–feedback control scheme is proposed for clutch slip control during the shift inertia phase. The feedforward control is designed based on flatness in consideration of the system nonlinearities, and the linear feedback control is given to accommodate the model errors and the disturbances. Lookup tables, which are widely used to represent complex nonlinear characteristics of powertrain systems, appear in their original form in the designed feedforward controller, while the linear feedback controller is calculated through linear matrix inequalities such that the control system is robust against the parameter uncertainties. Finally, the designed controller is tested on an AMESim powertrain simulation model, which contains a time-variant model of clutch actuators.     

基于NI CompactDAQ的轨道状态分布式在线监测系统

针对日益增加的城市轨道交通线路钢轨安全和减振降噪方面的需求,介绍一种基于NI Compact DAQ的轨道状态分布式在线监测系统。阐述了系统的基本组成、功能和软硬件总体设计。系统采用以NI Compact DAQ为核心的机箱,通过对关键路段不同站点间的振动、噪声、脱轨系数、钢轨动态位移、轨道结构沉降等动态参数进行实时在线监测,为实时掌握轨道动态参数建立一个开放式的监测平台。     

论国库集中支付制度执行的障碍及对策

随着国库集中支付制度的推行，预算单位通过实拨资金帐户办理支付的业务将萎缩，各项业务将主要通过财政直接支付和授权支付。本文分析了阻碍国库集中支付制度改革的各种原因，并提出了应对措施。     

共振弦检测技术在舰船轴系状态监测中的应用探讨

文章对应用共振弦检测技术进行舰船轴系状态的监测进行了初步研究，探讨了共振弦力敏传感器用于轴系状态检测的方法。该技术采用同步旋转非接触方式，将轴体产生的机械性微扭变量转换成相应电气参数频率的变化量，解决了传统的应变片检测因电源波动、环境条件恶劣以及信号传递损失等引起的测量误差和对轴系直径的限制，使轴系状态综合监测成为可能。     

Fault-tolerant control of heavy-haul trains

The fault-tolerant control (FTC) of heavy-haul trains is discussed on the basis of the speed regulation proposed in previous works. The fault modes of trains are assumed and the corresponding fault detection and isolation (FDI) are studied. The FDI of sensor faults is based on a geometric approach for residual generators. The FDI of a braking system is based on the observation of the steady-state speed. From the difference of the steady-state speeds between the fault system and the faultless system, one can get fault information. Simulation tests were conducted on the suitability of the FDIs and the redesigned speed regulators. It is shown that the proposed FTC does not explicitly worsen the performance of the speed regulator in the case of a faultless system, while it obviously improves the performance of the speed regulator in the case of a faulty system.     

A Novel Approach to Vehicle Dynamics using the Theory of a Cosserat Point and its Application to Collision Analyses of Platooning Vehicles

A fully three-dimensional, computationally inexpensive vehicular model is presented. In contrast to traditional rigid body models, the vehicle's sprung mass is modeled as a (nonlinearly) deformable body. The formulation of the equations of motion is based on a continuum theory known as the theory of a Cosserat point. These equations largely preserve the relative simplicity of rigid body dynamics but incorporate deformable features. The ease of computer implementation permits the simultaneous simulation of vehicle and collision dynamics of multiple vehicles and highway objects. In this paper, the theory of a Cosserat point is summarized and its general application to vehicle and collision dynamics is illustrated. A three-dimensional collision algorithm is discussed with emphasis on small closing velocities (negligible residual crush, elastic rebound). The novel model is compared to standard procedures.