辐射式仿真试验三元组天线阵元张角对被试设备性能仿真影响研究

分析天线阵球半径和三元组阵元张角在辐射式半实物仿真试验中对雷达天线性能的影响,给出在暗室设计中这两个重要参数选择的理论依据,并在工程实践中得到了应用。     

MAX7219在船舶操舵模拟器中的应用

本文基于S7-200PLC硬件平台,利用MAX7219实现船舶操舵模拟器的LED显示器。介绍了MAX7219的工作原理,实现MAX7219与S7-224CPU的硬件连接和软件编程。     

杆式破片不同攻角垂直侵彻硬铝靶板数值模拟

采用LS-DYNA显示分析,研究了杆式破片在不同攻角垂直侵彻硬铝靶板的响应,得出了不同着靶角度下破片侵彻能力,分析了临界速度、剩余速度、破口直径以及靶板塑性区域等参数,并总结了这些参数的变化规律。     

竖轴推进器两种控制机构叶片角的探讨

本文研究了用于竖轴推进器控制叶片自转的正统机构和VSP机构的叶片角特性。VSP机构是机架长度可调的双曲柄六杆机构。本文首先指明了它的独立几何参数,并提出一套求解其叶片角的简化公式。力了与正统机构比较,引出了伪偏心率、瞬时偏心率、平均偏心率和放大系数的概念。最后通过实例计算,比较了VSP机构和正统机构的叶片角特性。     

Sensitivity analysis of side-slip angle observer based on a tire model

We investigated the sensitivity of an observer based on a tire model using simulation in linear and nonlinear regions. In the linear region, we investigated the influence of vehicle speed by doing the same simulation at three speed levels. In the nonlinear region, the simulation condition was set such that the vehicle became unstable. In the linear region, steering input and cornering stiffness have a relatively large effect on the estimation error because these quantities determine tire side force. In the nonlinear region, the road surface's friction coefficient becomes a crucial factor. In both the regions, the observer is sensitive to yaw rate and longitudinal speed.     

增大协同反导区域的舰艇位置优化配置

协同反导是水面舰艇编队在反导防御中的一种常用方法,在对两艘舰艇协同反导区域计算的基础上,采用Matlab数学工具,对两舰的位置进行优化配置分析,增大两舰的协同反导区域,从而提高作战防御效果。     

磁阻式传感器在EPS中的应用

为解决接触式转角和扭矩传感器在使用寿命及测量精度方面的问题,研制出一种非接触式的传感器,在测量角度的同时,还能测出系统被施加的扭矩。本文介绍了一种基于磁阻式的,集成了转角和方向以及扭矩测量的传感器系统,并对该系统的结构进行相关设计,以实现同时测量转角和扭矩的功能。     

基于MSC1210单片机的汽车电动助力转向ECU系统的开发

阐述采用MSC1210Y3单片机控制汽车电动助力转向系统的工作原理、硬软件开发,对电机的双H桥驱动电路硬件以及车速和发动机转速测量软件等进行重点介绍。     

Common underlying steering curves for motorcycles in steady turns

We study the steady turn behaviours of some light motorcycle models on circular paths, using the commercial software package ADAMS-Motorcycle. Steering torque and steering angle are obtained for several path radii and a range of steady forward speeds. For path radii much greater than motorcycle wheelbase, and for all motorcycle parameters including tyre parameters held fixed, dimensional analysis can predict the asymptotic behaviour of steering torque and angle. In particular, steering torque is a function purely of lateral acceleration plus another such function divided by path radius. Of these, the first function is numerically determined, while the second is approximated by an analytically determined constant. Similarly, the steering angle is a function purely of lateral acceleration, plus another such function divided by path radius. Of these, the first is determined numerically while the second is determined analytically. Both predictions are verified through ADAMS simulations for various tyre and geometric parameters. In summary, steady circular motions of a given motorcycle with given tyre parameters can be approximately characterised by just one curve for steering torque and one for steering angle.     

Sideslip angle estimation based on input–output linearisation with tire–road friction adaptation

An adaptive sideslip angle observer considering tire–road friction adaptation is proposed in this paper. The single-track vehicle model with nonlinear tire characteristics is adopted. The tire parameters can be easily obtained through road test data without using special test rigs. Afterwards, this model is reconstructed and a high-gain observer (HGO) based on input–output linearisation is derived. The observer stability is analysed. Experimental results have confirmed that the HGO has a better computational efficiency with the same accuracy when compared with the extended Kalman filter and the Luenberger observer. Finally, a road friction adaptive algorithm based on vehicle lateral dynamics is proposed and validated through driving simulator data. As long as the tires work in the nonlinear region, the maximal friction coefficient could be estimated. This algorithm has excellent portability and is also suitable for other observers.