夹具设计中的误差计算问题

提出了工件定位时定位基准理想位置的概念，有助于正确理解和计算工件定位误差，以及准确界定工件定位误差与夹具对刀误差。     

ADAMS与PRO/E的结合在汽车四轮转向模式仿真中的应用

结合PRO/E ADAMS软件,建立汽车四轮转向系统模型,并对其进行运动仿真研究,其结果可为四轮转向系统的设计与开发提供依据.     

民航机务维修差错及其预警专家系统构建

通过对航空机务维修差错控制研究现状的分析,指出存在的问题,提出了以SHEL模型作为维修差错相关信息收集的工具,REASON模型作为分析这些信息的框架,从"人、机、环境、管理"四个方面进一步对维修差错的诱因进行分类的新思路.在此基础上,将Agent技术和基于规则的不确定性推理的预警方法应用于民航机务维修领域,构建了预警专家系统,阐述了其体系结构和系统功能.     

基于基础知识进行的转向传动轴运动布置校核

运用CATIA三维数字模型"DMU Kinematics"模块,分别对转向管柱及转向传动轴相关件进行约束,获得转向传动轴运动模型及转向传动半轴运动包络、转向传动轴当量夹角,用于验证转向传动轴与周边件间隙及其力矩波动是否符合设计要求,进而为布置设计转向传动轴十字轴位置提供理论依据。     

High-speed optimal steering of a tractor–semitrailer

A high-speed optimal trailer steering controller for a tractor–semitrailer is discussed. A linear model of a tractor–semitrailer with steered trailer axles is described, and an optimal trailer steering controller is introduced. A path-following controller is derived to minimise the path-tracking error in steady-state manoeuvres using active trailer steering. A roll stability controller is introduced by adding the lateral acceleration of trailer centre of gravity as another objective in the steering controller, so as to improve roll stability in transient manoeuvres. A strategy to switch between these two control modes is demonstrated. Simulation results show that the steering controller can ensure good path tracking of articulated vehicles in steady-state manoeuvres and improve roll stability significantly in transient manoeuvres, while maintaining the path-tracking deviation within an acceptable range. Tests with an experimental tractor–semitrailer equipped with a high-bandwidth active steering system validate the controller design and simulation results. The roll stability controller reduces the measured rearward amplification by 27%.     

Asymptotic sideslip angle and yaw rate decoupling control in four-wheel steering vehicles

This paper shows that, for a four-wheel steering vehicle, a proportional-integral (PI) active front steering control and a PI active rear steering control from the yaw rate error together with an additive feedforward reference signal for the vehicle sideslip angle can asymptotically decouple the lateral velocity and the yaw rate dynamics; that is the control can set arbitrary steady state values for lateral speed and yaw rate at any longitudinal speed. Moreover, the PI controls can suppress oscillatory behaviours by assigning real stable eigenvalues to a widely used linearised model of the vehicle steering dynamics for any value of longitudinal speed in understeering vehicles. In particular, the four PI control parameters are explicitly expressed in terms of the three real eigenvalues to be assigned. No lateral acceleration and no lateral speed measurements are required. The controlled system maintains the well-known advantages of both front and rear active steering controls: higher controllability, enlarged bandwidth for the yaw rate dynamics, suppressed resonances, new stable cornering manoeuvres and improved manoeuvrability. In particular, zero lateral speed may be asymptotically achieved while controlling the yaw rate: in this case comfort is improved since the phase lag between lateral acceleration and yaw rate is reduced. Also zero yaw rate can be asymptotically achieved: in this case additional stable manoeuvres are obtained in obstacle avoidance. Several simulations, including step references and moose tests, are carried out on a standard small SUV CarSim model to explore the robustness with respect to unmodelled effects such as combined lateral and longitudinal tyre forces, pitch, roll and driver dynamics. The simulations confirm the decoupling between the lateral velocity and the yaw rate and show the advantages obtained by the proposed control: reduced lateral speed or reduced yaw rate, suppressed oscillations and new stable manoeuvres.     

转向机构冲击试验台发射机构的开发

按国标GB11557的规定,在进行转向机构冲击试验时,须将规定质量的上半身假人以规定的速度水平发射到转向机构上.文中就这项试验所需的发射机构进行研究,设计了一种钢丝绳牵引式发射机构,并对其关键技术进行探讨.     

电动助力转向器的设计要求

为了促进国家标准或行业标准的旱日制定，文章提出了电动助力转向器的一些设计方面的要求。介绍了电动助力转向器的结构，阐述了其基本性能、工作环境及安全性要求，表明电动助力转向器具有结构简单、动力消耗小和节约能源等显著优势。指出目前国内许多自主品牌轿车都已安装了自己研发的电动助力转向器，其蓬勃的发展势头必将使电动助力转向器取代液力助力转向器成为可能。     

Theory and experimental research on six-track steering vehicles

The structural characteristics and steering behaviour of a six-track vehicle are described in this paper. Kinematic analysis for skid steering of a six-track vehicle under steady-state conditions on firm ground is conducted, with the relationship between thrust force and speed instantaneous centre of the track–terrain interface taken into consideration. A mechanical model for steady steering of a six-track vehicle is also presented based on the kinematic analysis. In this model, the steering inaccuracy and efficiency are defined to evaluate steering performance. The steering performance of a six-track vehicle is numerically simulated to analyse the effect of the structural parameters and deflection angles on tracks. A virtual prototype model is established based on the multi-body dynamics software RecurDyn for steering simulation and the findings coincide well with theoretical results. The theory and the virtual prototype simulations presented are verified by a power test of a bucket-wheel excavator. The method for analysing the steering performance of a six-track vehicle proposed in this paper provides a basis for designing a six-track vehicle.