水泥混凝土搅拌输送车液压传动系统设计

以8 m3水泥混凝土搅拌输送车为例,介绍了混凝土搅拌输送车驱动方案和液压系统主要参数的确定,传动系统原理图的拟定以及各液压元件的选型及功率、扭矩校核,并对整个系统的扭矩和功率流程进行了校核,保证了整个系统设计的合理性和可靠性.     

车辆高速行驶安全的思考

分析了轮胎等汽车部件对行车安全的作用，论述了对ABS和车轮定位参数日常检测的必要性．介绍了电涡流中央制动器的制动原理和使用成本。     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

整平机升降系统设计与分析

本文依托一种自浮式水下基床整平机,对该整平机上的重要的组成部分——升降系统进行了设计与分析,提出了一种结构简单、运行可靠的升降系统；对组成升降系统的升降机构提出了液压环梁插销式升降机构、齿轮齿条式升降机构和液压缸升降机构,对支撑机构考虑了十字转动支撑机构和万向球轴承支撑机构,对锁紧机构提出了楔块锁紧机构和棘爪锁紧机构,通过对各种方案进行分析论证,最终确定了升降系统由液压缸升降机构、十字转动支撑机构和棘爪锁紧机构组成；最后对棘爪锁紧机构进行了瞬态动力学计算,计算结果得出棘爪锁紧机构所受最大应力为154.52MPa小于其许用应力172.5MPa,验证了棘爪锁紧机构的强度满足要求。     

Model based urban traffic control,part II: Coordinated model predictive controllers

The present paper describes how to use coordination between neighbouring intersections in order to improve the performance of urban traffic controllers. Both the local MPC (LMPC) introduced in the companion paper (Hao et al., 2018) and the coordinated MPC (CMPC) introduced in this paper use the urban cell transmission model (UCTM) (Hao et al., 2018) in order to predict the average delay of vehicles in the upstream links of each intersection, for different scenarios of switching times of the traffic lights at that intersection. The feedback controller selects the next switching times of the traffic light corresponding to the shortest predicted average delay. While the local MPC (Hao et al., 2018) only uses local measurements of traffic in the links connected to the intersection in comparing the performance of different scenarios, the CMPC approach improves the accuracy of the performance predictions by allowing a control agent to exchange information about planned switching times with control agents at all neighbouring intersections. Compared to local MPC the offline information on average flow rates from neighbouring intersections is replaced in coordinated MPC by additional online information on when the neighbouring intersections plan to send vehicles to the intersection under control. To achieve good coordination planned switching times should not change too often, hence a cost for changing planned schedules from one decision time to the next decision time is added to the cost function. In order to improve the stability properties of CMPC a prediction of the sum of squared queue sizes is used whenever some downstream queues of an intersection become too long. Only scenarios that decrease this sum of squares of local queues are considered for possible implementation. This stabilization criterion is shown experimentally to further improve the performance of our controller. In particular it leads to a significant reduction of the queues that build up at the edges of the traffic region under control. We compare via simulation the average delay of vehicles travelling on a simple 4 by 4 Manhattan grid, for traffic lights with pre-timed control, traffic lights using the local MPC controller (Hao et al., 2018), and coordinated MPC (with and without the stabilizing condition). These simulations show that the proposed CMPC achieves a significant reduction in delay for different traffic conditions in comparison to these other strategies.     

车用摇枕铸钢件浇冒口切割打磨自动化系统的设计

铸钢件毛坯浇冒口切割及打磨时存在噪音大、弧光强烈、粉尘污染严重,增加了人工操作时的劳动强度,并严重影响操作人员的身体健康。本文针对这些问题,拟以铁路车辆摇枕铸钢件浇冒口切割及打磨为例,提出了单工位打磨、流水线式多工位合作的打磨清理方案,设计了自动化打磨单元,实现机械化、自动化操作,既提高了铸件打磨清理的质量和生产率,又大大改善了工人操作条件,减轻了工人的劳动强度,达到了“以机代人”的目的,对铸钢件实现绿色化乃至智能化生产具有重要意义。     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

流线型钢箱梁涡激振动机理与气动控制措施

以某主跨390 m的独塔流线型钢箱梁斜拉桥为工程依托，采用风洞试验与计算流体动力学（Computational Fluid Dynamics，CFD）相结合的方法对流线型钢箱梁涡激振动机理与气动控制措施进行研究。首先，采用几何缩尺比为1∶30的主梁节段模型进行主梁涡振性能与气动控制措施优化研究；其次，采用CFD方法对主梁涡振响应进行流固耦合计算，将Newmark-β算法嵌入ANSYS Fluent用户自定义函数（User Defined Functions，UDFs）实现主梁结构振动响应求解，同时结合动网格技术实现主梁断面流固耦合分析；并根据判断条件来检索箱梁壁面上的网格单元，以获得主梁断面振动过程中的表面压力，然后结合主梁结构振动响应、表面压力以及流场特征等对主梁涡激振动机理进行分析。结果表明：该桥主梁原设计方案存在涡激共振现象，将梁底检修车轨道内移120 cm可有效抑制主梁涡振响应；主梁涡激振动响应的数值模拟结果与风洞试验结果吻合较好；检修车轨道内移120 cm后主要改变了箱梁下表面平均压力系数分布特性，且箱梁表面各测点脉动压力卓越频率不一致，有效减小了主梁涡激振动响应；流线型箱梁靠近迎风侧的“被动区域”对结构涡振响应贡献较小，背风侧“驱动区域”发生周期性旋涡脱落是影响流线型箱梁涡振的主要因素。     

高职院校公共《计算机基础》课程实践教学研究

对高职院校公共《计算机基础》实践教学效果及其存在的问题进行剖析,针对这些问题所采取的应对措施进行了探索和研究。提出加强实践教学改革的方案和具体方法,使高职院校的计算机基础教育能更好地与市场接轨。     

钩形外锁闭装置锁闭框组优化的探讨

钩形外锁闭装置在实践中逐步暴露出一些诸如转换不畅、卡阻,磨耗严重,适应尖轨窜动性不良等问题.为此研究探讨对既有的外锁闭装置锁闭框组（包括锁闭框、锁闭铁、耐磨板等）进行优化,提高道岔转换的可靠性.