Influence of uneven rail irregularities on the dynamic response of the railway track using a three-dimensional model of the vehicle–track system

A mathematical model of the vehicle–track interaction is developed to investigate the coupled behaviour of vehicle–track system, in the presence of uneven irregularities at left/right rails. The railway vehicle is simplified as a 3D multi-rigid-body model, and the track is treated as the two parallel beams on a layered discrete support system. Besides the car-body, the bogies and the wheel sets, the sleepers are assumed to have roll degree of freedom, in order to simulate the in-plane rotation of the components. The wheel–rail interface is treated using a nonlinear Hertzian contact model, coupling the mathematical equations of the vehicle–track systems. The dynamic interaction of the entire system is numerically studied in time domain, employing Newmark's integration method. The track irregularity spectra of both the left/right rails are taken into account, as the inputs of dynamic excitations. The dynamic responses of the track system induced by such irregularities are obtained, particularly in terms of the vertical (bounce) and roll displacements. The numerical model of the present research is validated using several benchmark models reported in the literature, for both the smooth and unsmooth track conditions. Four sample profiles of the measured rail irregularities are considered as the case studies of excitation sources, examining their influences on the dynamic behaviour of the coupled system. The results of numerical simulations demonstrate that the motion of track system is significantly influenced by the presence of uneven irregularities in left/right rails. Dynamic response of the sleepers in the roll direction becomes more sensitive to the rail irregularities, as the unevenness severity of the parallel profiles (quantitative difference between left and right rail spectra) is increased. The severe geometric deformation of the track in the bounce–pitch–roll directions is mainly related to such profile unevenness (cross-level) in left/right rails.     

T91与钢102异种钢焊接接头氢致裂纹研究

用甘油法分别测定了CM-9Cb、R347和国内新研制的T91专用焊条熔敷金属中的护散氢含量，通过阴极电解渗氢和定载延迟开裂试验，研究了选用不同焊条焊接时、T91与钢102异种钢接头的氢致裂纹倾向，确定了临界启裂应力。     

Network equilibrium models with battery electric vehicles

The limited driving ranges, the scarcity of recharging stations and potentially long battery recharging or swapping time inevitably affect route choices of drivers of battery electric vehicles (BEVs). When traveling between their origins and destinations, this paper assumes that BEV drivers select routes and decide battery recharging plans to minimize their trip times or costs while making sure to complete their trips without running out of charge. With different considerations of flow dependency of energy consumption of BEVs and recharging time, three mathematical models are formulated to describe the resulting network equilibrium flow distributions on regional or metropolitan road networks. Solution algorithms are proposed to solve these models efficiently. Numerical examples are presented to demonstrate the models and solution algorithms.     

船体结构火工矫正工艺热弹塑性分析

在对船体结构火工矫正工艺的温度场进行数值分析的基础上,进而对火工矫正工艺的热弹塑性进行了分析,并对板厚及加热速度对残余应力及变形的影响做了研讨.     

Fe—21Ni—4Mn合金磁场诱发马氏体形貌和惯习面

本文采用强脉冲磁场、光学显微镜和 H.R.Pak 等提出的惯习面确定方法研究了 Fc-21Ni-4Mn 合金中磁场诱发马氏体形貌和惯习面.结果表明,Fe-21Nj-4Mn 合金冷却形成板条马氏体,而在 Ms 温度以上,磁场诱发形成多片状而少板条马氏体,且随温度升高,磁场诱发马氏体形貌为蝶状.磁场诱发马氏体惯习面与冷却形成的马氏体相同,均为(225),对于蝶状马氏体发现了一种新的对称面(110).     

Smarter and more connected: Future intelligent transportation system

Emerging technologies toward a connected vehicle-infrastructure-pedestrian environment and big data have made it easier and cheaper to collect, store, analyze, use, and disseminate multi-source data. The connected environment also introduces new approaches to flexible control and management of transportation systems in real time to improve overall system performance. Given the benefits of a connected environment, it is crucial that we understand how the current intelligent transportation system could be adapted to the connected environment.     

辊压成型设备在客车蒙皮制造中的应用

介绍几种不同结构的辊压成型设备及其在客车蒙皮制造中的应用，以满足客车不同部位蒙皮成型的要求。     

客车底盘纵梁数控冲孔生产线

简要介绍客车底盘纵梁数控冲孔生产线的发展历史与现状；着重介绍SPU12—32-4型汽车U型纵梁三面数控冲孔生产线和SPTB120—10型纵梁数控平板冲孔生产线的特点。     

基于定量分析的城市轨道交通与土地利用一体规划研究

随着城市化进程的加快,大都市交通拥堵现象日益严重,规划建设城市轨道交通已经成为许多城市解决交通拥堵、促进经济发展的迫切需求。城市轨道交通建设与城市土地利用是互馈关系,文章介绍3种定量研究方法,在定量分析的基础上,探讨了轨道交通车站、线路和线网的定量一体规划,最后提出轨道交通与土地利用定量一体规划以点、线、面分级考虑的一些建议。     

铁路交通中基于通信的无线定位问题分析

简要阐述无线定位的基本原理和在铁路交通中的具体应用和发展趋势 ,对定位误差进行了分析 ,并结合铁路交通定位的特殊性 ,提出适合铁路交通的单、双基站定位方案 ,在定位精度和抗NLOS等方面对各方案进行比较分析。提出建立自适应列车运动轨迹预测模型 ,并对如何提高定位精度进行了分析。