矿山法隧道拱部装配式衬砌结构设计研究

为解决矿山法铁路隧道施工拱部常出现的衬砌背后脱空、二次衬砌厚度及强度不足等质量缺陷问题，提出矿山法隧道拱部采用装配式预制管片结构的新思路，并基于时速350 km双线铁路隧道，采用数值计算分析研究拱部装配式衬砌结构的系列设计参数。主要研究结论有： 1）提出拱部装配式衬砌环向不分块的整体预制形式，综合考虑理论计算结果、行车安全分析、机械设备运输及拼装能力、拱部衬砌承载能力等，确定拱部管片环向弦长8.6 m、纵向幅宽2 m、衬砌厚度50 cm的结构尺寸及配筋设计参数； 2）提出拱部预制管片之间环缝采用螺栓连接、拱部预制管片与现浇边墙采用“L”型榫接头的接头形式及其设计参数； 3）为保证拱部管片的顺利安装，“L”型榫接头应考虑一定的施工误差，同时拱部预制管片与初期支护间应预留安装空间，后期通过管片背后纵向注浆填充密实。隧道拱部装配式衬砌技术成功应用于重庆胡家沟隧道，总体实施效果较好。     

Pragmatic regularization of element-dependent effects in finite element simulations of ductile tensile failure initiation using fine meshes

For the evaluation of the structural response in accidental scenarios like ship collisions, the simulation of tensile failure initiation is inevitable. Here, one difficulty is that the process of failure initiation is a very local process, which cannot be simulated in its details at present due to the computing effort which would be required. However, there are various approaches how the failure initiation can be simplified and simulated in finite element models of large thin-walled structures. A short overview of these approaches is given. A pragmatic approach, which is suitable for relatively small elements for the simulation of failure initiation in uniaxial to biaxial stress states, is chosen within this paper for further investigations regarding the applicability for thin-walled steel structures. Exemplary simulations with solid and, in particular, shell elements are used to demonstrate how the effects of element size and other element properties can be considered in the simulation of failure initiation. The focus is also on imperfections that are relevant in simulations with small elements. For this purpose, an indentation experiment is simulated with different imperfections.     

地铁隧道二次衬砌钢筋网防裂性能研究

为了定量分析防裂钢筋网提高隧道衬砌结构抗裂性能的机理和幅度,以地铁双线隧道二次衬砌结构为研究对象,采用荷载结构法和杆系有限元数值模拟方案,定量分析二次衬砌结构不设置与设置钢筋网这2种情况下的开裂临界荷载。其中素混凝土结构以达到极限拉应变为临界状态,衬砌结构增设钢筋网后以达到GB 50157-2013《地铁设计规范》允许的最大裂缝宽度0.2mm为临界状态。分析结果表明,配置防裂钢筋网后,Ⅲ级和Ⅳ级围岩衬砌结构抗裂性能可分别提高22.4%和19.3%,Ⅴ级围岩衬砌结构抗裂性能提高15.2%;Ⅲ级和Ⅳ级围岩二次衬砌结构的破坏形式由脆性破坏变为延性破坏,从而提高了其安全性能。     

隧道口减光设施对照明的影响研究

近年来,伴随着我国基础设施建设的不断推进,隧道里程不断增多,隧道照明系统的重要性日益突出,因此对隧道洞口驾驶员视觉特性、减光设施的特点及减光效果进行研究,具有重要的意义。本文通过对隧道洞口驾驶员的视觉特性进行研究,分别论述各种洞口减光设施的特点,并以南京扬子江路隧道、富贵山隧道、双龙街立交隧道的检测数据为基础,计算减光设施对洞口亮度的影响,以及隧道内加强照明的亮度需求的降低程度,进一步分析得出采用减光设施对照明设施建设的投资影响以及可节约的照明养护成本等。     

Numerical study on the dynamic response of a truncated ship-hull structure under asymmetrical slamming

Dynamic response of ship-hull structure under slamming has tracked widespread attention in the marine structural design. However, our understanding on the dynamic characteristics largely relies on the symmetrical slamming cases. This paper presented a preliminary numerical investigation on the dynamic response of a truncated ship-hull structure under asymmetrical slamming based on the uncoupled CFD-FE method. Asymmetrical slamming loads were predicted through combining the seakeeping analysis and CFD method. In there, three kinds of motions (vertical, horizontal and roll motions) of 2D ship sections were obtained through the seakeeping analysis and then the slamming pressure was predicted through simulating the water entry with various motions based on CFD method. The dynamic response was analyzed through finite element method. Numerical predictions including ship motions, slamming loads and dynamic analysis were validated against published experimental data and numerical calculations. The characteristics of asymmetrical slamming loads were analyzed showing obvious asymmetry in space, and the dynamic characteristic of the ship bow structure was further clarified through discussing the deformation and stress distribution. These results are useful for readers for better understanding the dynamic characteristics of the bow structure under slamming.     

激光焊接技术在轨道交通车辆中的应用

为解决轨道交通车辆不锈钢车体电阻点焊的外观质量差、密封性差、效率低等缺点,对部分熔透激光焊接工艺在不锈钢车体焊接中的应用开展了研究。研究包括:部分熔透激光叠焊原理、参数优化试验、显微组织分析、疲劳性能分析,以及激光焊接不锈钢车辆侧墙的结构改进。研究结果表明,不锈钢车体焊接中采用部分熔透激光叠焊工艺,可以获得高质量的表面状态及疲劳强度,车体结构强度高于EN12663标准中的要求。     

Determinants of airport retail revenue: a review of literature

ABSTRACT

As the airport retail industry continues to grow due to increasing travel demands, airport operators are increasingly developing their retail revenue potential to ensure financial viability. This study aims to provide a review of airport retail literature and identify the salient factors associated with passenger shopping behaviour. The paper presents a review of contemporary airport retail literature, covering a total of 50 studies from 1998 to 2018. The review identified 26 factors, which could broadly be grouped into five categories: airport/operator related; passengers' demographic related; passengers’ travel related; passengers’ psychological related and passengers’ resources related. In addition to providing a summary of the statistically significant factors across studies, the review identifies and discusses potential approaches for future research. These include the importance of considering both “to spend or not” decision and how much to spend and how most empirical studies focussed on the former; the gap in empirical analysis on the impact of airport terminal design layout on retail performance; and the gap in application of general consumer shopping behavioural models to airport retail problems. The paper concludes with the suggestion that we can build on the existing studies to develop a hybrid approach to solve several of the identified gaps simultaneously.     

隧道内列车振动对近接建筑物的影响分析北大核心

针对运营列车通过隧道时引起近接建筑物地面振动进行了现场测试,并对测试数据进行了功率谱、Z振级及1/3倍频程分析。在此基础上,利用有限元软件建立了围岩-隧道-轨道结构振动模型,对运营列车引起的建筑物振动进行了计算分析。结合实测与计算结果,对近接建筑物的振动特性进行了评价。结果表明:列车以速度300 km/h通过隧道时,地面振动功率谱主频白天集中在33.0 Hz左右,夜间集中在42.7 Hz左右,夜间的主频比白天大;地面各测点处Z振级的总体趋势是先波动式上升,再平缓波动,后逐渐波动式下降,地面Z振级主要集中在20~80 dB;1/3倍频程分频最大振级白天位于48.4~60.8 dB,夜间位于47.4~59.4 dB;列车通过隧道时基础处振动速度峰值整体呈波浪形分布,引起的地面振动速度小于0.045 mm/s,小于规范限值要求,对建筑物基础以及人体舒适度的影响较小;在缺乏大量实测结果的条件下,结合小样本实测结果,采用有限元计算结果进行振动响应评价具有一定的可行性。     

真空断路器用单稳态永磁机构概述

本文对单稳态永磁机构与传统机构以及双稳态永磁机构的特点进行了对比,对其结构与工作原理进行了简单说明,并对其发展前景进行了简要探讨。     

船舶差异化监管选船机制研究——以青岛黄岛海事处为例

该文通过简要介绍黄岛辖区概况以及面临的监管压力,全面分析目前选船标准的现状及存在的3方面问题,并提出了3方面改进建议,最终以青岛黄岛海事处为例探索建立了以部海事局选船标准为基础,同时将货物、环境、码头3方面纳入其中,符合辖区监管特点的选船机制。