某型汽轮机超速脱扣试验浅析

某型汽轮机的超速保护装置采用脱扣结构,文章针对该汽轮机的超速脱扣结构进行分析,总结此种超速脱扣装置的装配要求和试验方法,以利于该型汽轮机的生产。     

Hydroelastic analysis of oblique irregular waves with a pontoon-type VLFS edged with dual inclined perforated plates

The fluid-structure interaction of oblique irregular waves with a pontoon-type very large floating structure (VLFS) edged with dual horizontal/inclined perforated plates has been investigated in the context of the direct time domain modal expansion theory. For the hydroelastic analysis, the boundary element method (BEM) based on time domain Kelvin sources is implemented to establish water wave model including the viscous effect of the perforated plates through the Darcy’s law, and the finite element method (FEM) is adopted for solving the deflections of the VLFS modeled as an equivalent Mindlin thick plate. In order to enhance the computing efficiency, the interpolation-tabulation scheme is applied to assess rapidly and accurately the free-surface Green function and its partial derivatives in finite water depth, and the boundary integral equation of a half or quarter VLFS model is further established taking advantage of symmetry of flow field and structure. Also, the numerical solutions are validated against a series of experimental tests. In the comparison, the empirical relationship between the actual porosity and porous parameter is successfully applied. Numerical solutions and model tests are executed to determine the hydroelastic response characteristics of VLFS with an attached anti-motion device. This study examines the effects of porosity, submerged depth, inclined angle and gap distance of such dual perforated anti-motion plates on the hydroelastic response to provide information regarding the optimal design. The effects of oblique wave angle on the performance of anti-motion and hydroelastic behavior of VLFS are also emphatically examined.     

基于模糊综合评价法的城市综合管廊结构健康评价方法研究

为解决城市综合管廊结构健康状况评估结果无法量化和指导运维的问题，通过分析模糊综合评价理论在交通隧道结构健康评价方法研究中的应用，依照类比思想，利用该理论建立城市综合管廊结构健康状况评价体系。首先，依据有关养护规定和调研结果，基于不同需求分别建立管廊结构的本体完好状况和本体结构状况评价指标体系； 其次，以交通隧道和综合管廊养护经验为基础，划分各指标的分级判定标准； 然后，采用层次分析法，计算评价指标的权重分配； 最后，采用柯西分布型隶属函数和矩阵型隶属函数确定各指标的隶属度，建立一级和二级模糊综合评价模型，赋予评价向量中各评语相应分值，将评价向量单值化，判定管廊结构健康状况。采用所提出的评价方法应用于实际工程，所得评价结果与经验评判得到的结果相同。     

轨道安全监测中传感器优化配置研究

为了研究轨道结构安全监测中传感器的合理配置方法,确保城市轨道交通安全运营,通过建立桥上交叉渡线道岔模型和钢轨应变传递误差最小的目标函数,提出传感器测点选择依据和监测方案评价标准,保证监测方案的经济性、合理性。结论表明:模型数据曲线可以指导监测系统的测点位置选择;随着传感器测点数量增加,监测误差逐渐减小,但在误差比率的"拐点"后增加单位个数传感器带来的收益降低;通过建立误差最小准则的目标函数,结合误差指标可以评价和优化传感器布设方案;钢轨位移、附加力等指标的监测方案也可以通过本文方法确定。     

马鞍山长江公路大桥钢塔线形控制技术

马鞍山长江公路大桥左汊主桥为（360＋2×1080＋360） m的三塔两跨悬索桥，中塔采用钢－混叠合、塔梁固结门式结构，下塔柱为预应力钢筋混凝土结构，上塔柱为钢结构，钢塔共分21个节段，首节采用浮吊安装，标准节段长6 m ，最大起吊重达235 t ，采用塔吊进行安装。为确保钢塔线形满足要求，对影响钢塔安装精度因素进行分析，形成以控制钢塔制造质量为核心、钢塔首节段安装精度为基础的线形控制流程，对钢塔节段进行工厂制造控制和现场安装控制。工厂制造控制包括零部件加工、块体制作、节段组拼、端面机加工、预拼装；现场安装控制包括首节段安装、标准节段安装、横梁与钢塔的连接。实践表明，该桥采用以控制钢塔制造精度为核心的钢塔线形控制技术进行钢塔架设施工，施工过程中钢塔制造精度和安装精度满足要求，实现了钢塔线形控制的目的。     

广西普通高等教育经费来源结构的变化与分析——以2001-2011年教育经费统计数据为例

近十年来，广西普通高等教育经费来源结构已呈现出多元化趋势。但是普通高等教育经费总量仍显不足；经费来源结构不尽合理，二元格局明显；科研经费拨款所占比例过小；过于依赖学杂费的增加。广西高等教育未来发展所需的经费保障，要求必须真正实现经费来源的多元化。     

Detection of nonlinearity effects in structural integrity monitoring methods for offshore jacket-type structures based on principal component analysis

The detection of changes in the dynamic behavior of structures is an important issue in structural safety assessment. The development of detection methods assumes greater significance in the case of offshore platforms because the inherent problems are compounded by the harsh environment. Here, we describe an instrumented physical model for the structural health monitoring of an offshore jacket-type structure and the results of tests in several different damage scenarios. In a comparative investigation of two different methods, we discuss the difficulties of implementing damage detection techniques for complex structures, such as offshore platforms. The combined algorithm of a fuzzy logic system and a model updating method are briefly discussed, and a method based on stochastic autoregressive moving average with exogenous input is adopted for the structure. The consideration of uncertainties and the effects of nonlinearity were major objectives. So, the methods were also investigated based on the test scenarios consisting of the physical model with a geometric nonlinearity. The principal component analysis method was utilized for the detection of nonlinearity in the recorded data. The results show that the developed methods are suitable for damage classification, but the quality of the acquired signals must be considered an important factor influencing successful classification. The development of these methods may be extremely useful, as such technologies could be applied for offshore platforms in service, enabling damage detection with fewer false alarms.     

国Ⅴ柴油机SCR系统结构对尿素结晶影响研究

针对某国Ⅴ商用柴油车SCR系统中出现的结晶问题,综合应用CFD模拟和台架试验进行分析研究,提出一系列结构优化和改进方案,改善了SCR前流场状态以及流体的流动均匀性和尿素均匀性,基本消除了排气系统在实际工况下的结晶风险,提高了全系统的抗结晶能力,保证了SCR系统的正常运行。通过对模拟结果和台架试验数据的比对分析,研究了流场分布以及混合器结构对结晶形成产生的影响。     

桥面铺装复合梁的有限元分析

采用三维有限元法,分析了复合梁试件模型和实体桥面铺装模型中沥青混凝土铺装层表面的受力特性及其变化趋势。计算结果表明,复合梁模型和实体桥面铺装模型中的沥青铺装层表面的受力状态相同,变化趋势一致,采用试验可控性较好的复合梁试验能够模拟不同结构组合的桥面铺装层受力特性,为大跨径桥梁桥面铺装层结构设计、材料选择提供依据。     

高速公路中收费和清分的动态解决方案

在高速公路收费和清分过程中,由于新增的高速公路和收费站点特别是环型路段的增加使得原有的静态算法已经不适宜于现实情况。本文提出了高速公路中基于最短路径和环型路段的动态收费和清分解决方案,并给出了详细的基于环型路段的动态算法。环型路段问题解决后,可以判知车辆实际行车路线,从而大幅提高收费及清分的准确性和效率。