市政给中水管道设计优化分析

市政给排水管道结构设计是一项关乎管道安全的重要设计,设计人员往往根据以往经验和常规做法进行管道设计,忽略了管道安全计算,这将直接影响城市市政道路给排水管道工程的质量。结合实际项目,对给水、中水管道的常规管材球墨铸铁管进行结构计算分析,并根据计算结果选择相应的措施,进一步完善市政管道设计,在满足设计规划、规范和要求的基础上,提高设计质量,确保城市道路市政给排水管道正常、高效地运行。     

威海双岛湾科技城一号桥主索鞍设计

根据以往国内大型悬索桥的设计经验,对威海双岛湾科技城一号桥主索鞍设计进行了探讨;并通过ANSYS进行有限元分析,对主索鞍座受力进行了分析。经过对计算结果的分析和比较发现,高应力区都集中在连接部位和接触部位,随着远离接触点,应力迅速下降。该次计算的应力结果较为均匀,基本满足规范要求。     

浅析高速公路机电系统的防雷保护

通过对高速公路机电系统雷害进行分析,提出了高速公路机电系统的防雷原则和具体措施,强调了系统性防雷的重要性。     

浅谈我国汽车零部件工业现状及发展策略

通过对当前零部件工业的分析,针对目前存在的诸多问题,提出一些建议,希望能对有关企业的战略发展,以及有关部门的宏观调控有所帮助。     

山区高速公路边坡稳定性评价方法浅析

山区高速公路边坡的稳定性对道路交通安全具有重要影响,通过对国内外很多边坡稳定性评价方法的介绍,指出了各种边坡稳定性评价方法存在的缺陷,并提出了一些建议。     

高速公路改扩建边坡工程的稳定性数值分析

针对某高速公路改扩建过程中对边坡工程的二次开挖卸荷的稳定性问题进行分析,采用有限元软件midas／gts对边坡的开挖支护过程进行模拟,得出了开挖边坡过程中的应力场变化规律,开挖同时应对边坡及时支护。并求得了支护后的边坡安全系数。     

Second best toll and capacity optimisation in networks: solution algorithm and policy implications

This paper looks at the first and second best jointly optimal toll and road capacity investment problems from both policy and technical oriented perspectives. On the technical side, the paper investigates the applicability of the constraint cutting algorithm for solving the second best problem under elastic demand which is formulated as a bilevel programming problem. The approach is shown to perform well despite several problems encountered by our previous work in Shepherd and Sumalee (Netw. Spat. Econ., 4(2): 161–179, 2004). The paper then applies the algorithm to a small sized network to investigate the policy implications of the first and second best cases. This policy analysis demonstrates that the joint first best structure is to invest in the most direct routes while reducing capacities elsewhere. Whilst unrealistic this acts as a useful benchmark. The results also show that certain second best policies can achieve a high proportion of the first best benefits while in general generating a revenue surplus. We also show that unless costs of capacity are known to be low then second best tolls will be affected and so should be analysed in conjunction with investments in the network.

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

Vulnerability analysis for large-scale and congested road networks with demand uncertainty

To assess the vulnerability of congested road networks, the commonly used full network scan approach is to evaluate all possible scenarios of link closure using a form of traffic assignment. This approach can be computationally burdensome and may not be viable for identifying the most critical links in large-scale networks. In this study, an “impact area” vulnerability analysis approach is proposed to evaluate the consequences of a link closure within its impact area instead of the whole network. The proposed approach can significantly reduce the search space for determining the most critical links in large-scale networks. In addition, a new vulnerability index is introduced to examine properly the consequences of a link closure. The effects of demand uncertainty and heterogeneous travellers’ risk-taking behaviour are explicitly considered. Numerical results for two different road networks show that in practice the proposed approach is more efficient than traditional full scan approach for identifying the same set of critical links. Numerical results also demonstrate that both stochastic demand and travellers’ risk-taking behaviour have significant impacts on network vulnerability analysis, especially under high network congestion and large demand variations. Ignoring their impacts can underestimate the consequences of link closures and misidentify the most critical links.     

穿越古滑坡川主寺隧道围岩破坏特征及稳定性研究

文章以川主寺隧道所处的工程地质条件为基础,通过现场调研分析了隧道围岩变形破坏形式主要为坍塌、掉块以及剥落.围岩稳定性三维有限元数值模拟结果显示,碎裂围岩自稳能力差,围岩变形以弹塑性变形、松弛变形为主;H型钢拱架支护结构对碎裂围岩稳定性起到积极的作用,并通过典型洞段现场位移监测数据分析结果得以证实.