复杂地质和环境条件下水闸围堰工程设计技术

在河流中建设水闸、船闸,其围堰工程是保证主体工程安全干施工的重要前提和保障。结合某水闸工程设计,针对围堰设计遇到的地质和环境条件复杂、施工场地狭窄、施工期不断流等难题,开展围堰总体布置、纵横向围堰结构设计、支护围堰结构设计、围堰止水墙设计等一系列关键技术问题研究。采用研究成果设计的方案不仅可以减少围堰工程量、节约工期,而且能确保项目顺利安全实施。     

船用造水机常见故障原因及对策

远洋运输船舶上的造水机对于运输的经济效益和航情变化的应对能力具有十分重要的意义。一旦遇到造水机发生故障,不仅影响船员的正常生活,还会危及船舶的运输安全,因此保证造水机正常工作,提供充足的淡水就显得非常必要。文章对造水机常见故障的原因进行了分析,并提出了一些对策措施,对提高航运的经济性和安全性,具有重要意义。     

挂篮底模纵梁受力简化计算方法及承重分配系数

以一桥梁施工工程实例为依托,采用有限元软件ANSYS对桥梁悬臂施工中使用的菱形挂篮进行仿真分析.提出3种简化模式计算底模纵梁的承重分配,对比发现将底模纵梁承受的外荷载简化为集中荷载,并分配至挂篮下前后横梁的方法是最优简化计算方法.在此基础上对挂篮底模纵梁承重分配系数进行优化,从而简化了繁琐的挂篮底模纵梁受力分析计算,保证了挂篮结构设计和施工的安全.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

整平机升降系统设计与分析

本文依托一种自浮式水下基床整平机,对该整平机上的重要的组成部分——升降系统进行了设计与分析,提出了一种结构简单、运行可靠的升降系统；对组成升降系统的升降机构提出了液压环梁插销式升降机构、齿轮齿条式升降机构和液压缸升降机构,对支撑机构考虑了十字转动支撑机构和万向球轴承支撑机构,对锁紧机构提出了楔块锁紧机构和棘爪锁紧机构,通过对各种方案进行分析论证,最终确定了升降系统由液压缸升降机构、十字转动支撑机构和棘爪锁紧机构组成；最后对棘爪锁紧机构进行了瞬态动力学计算,计算结果得出棘爪锁紧机构所受最大应力为154.52MPa小于其许用应力172.5MPa,验证了棘爪锁紧机构的强度满足要求。     

Locating emergency vehicles with an approximate queuing model and a meta-heuristic solution approach

In this paper, the location of emergency service (ES) vehicles is studied on fully connected networks. Queuing theory is utilized to obtain the performance metrics of the system. An approximate queuing model the (AQM) is proposed. For the AQM, different service rate formulations are constructed. These formulations are tested with a simulation study for different approximation levels. A mathematical model is proposed to minimize the mean response time of ES systems based on AQM. In the model, multiple vehicles are allowed at a single location. The objective function of the model has no closed form expression. A genetic algorithm is constructed to solve the model. With the help of the genetic algorithm, the effect of assigning multiple vehicles on the mean response time is reported.     

基于AR模型的并靠两船相对运动预报研究

根据两船相对运动的特点,利用两船模相对运动的测量数据,运用基于自回归模型的时间序列分析法,建立了两船相对运动的数学模型,并给出了运动姿态的预报值.通过本方法的研究,可以得到满意的相对运动预报精度,为两船补给波浪、补偿装置的开发打下了理论基础.     

大学计算机基础课程教学方式的改革与实践

随着信息技术和计算机技术迅速发展和普及，传统的计算机基础教学方式面临新的挑战。本文探讨了当前形势下大学计算机基础课程教学模式的改革方向，根据多年的教学实践，探讨了高校计算机基础教学改革模式。     

A novel approach for the modelling of air quality dynamics in underground railway stations

Indoor air quality in subterranean train stations is a concern in many places around the globe. However, due to the specificity of each case, numerous parameters of the problem remain unknown, such as the braking discs particle emission rate, the ventilation rate of the station or the complete particle size distribution of the emitted particles. In this study the problem of modelling PM₁₀ concentration evolution in relation with train traffic is hence addressed with a particle-mass conservation model which parameters are fitted using a genetic algorithm. The parameters of the model allow to reproduce the dynamics and amplitude of four field data sets from the French and Swedish underground contexts and comply with realistic bounds in terms of emissions, deposition and ventilation rate.