基于分段单孔反演的隧址区多断层地应力分布特征

目前，针对具有多个原位地应力测试钻孔的隧址区初始地应力场反演，往往一次性将全部实测值用以计算值的回归反分析，没有考虑到隧道纵向长度远超其他方向且钻孔分布较远的特点，单个钻孔表征的临近区域地应力分布特征或反演精度被其余钻孔实测值“拉低”，导致整体反演结果容易陷入局部优解。依托拉林铁路桑珠岭隧道、叙毕铁路斑竹林隧道、沿江高速火山隧道、木寨岭公路隧道等工程，采用多元线性回归法结合最小二乘法寻优准则，分析了隧址区仅有单个钻孔反演精度较高的原因，提出了对具有多个钻孔的隧址区分段并分别进行单钻孔回归反演的新方法。在此基础上，重点讨论了木寨岭公路隧道断层破碎带区域地应力分布特征。结果表明：分段单孔反演较多孔反演进一步提高了反演精度；地应力的分布在断层前后呈现出先急剧增大后急剧减小的特征；除自重应力与埋深存在一定关联外，两项水平主应力随断层间距或厚度的增大突变性加剧；断层之间间距、断层倾角、断层厚度均是影响地应力方向偏转大小的重要因素，断层之间间距或断层倾角越小、断层越厚，地应力方向偏转越显著。     

地铁专用回流轨牵引供电系统应用方案

分析了常规地铁牵引供电系统采用走行轨兼做回流轨存在的问题,以及杂散电流腐蚀问题带来的严重危害。针对目前专用回流轨技术方案发展现状,推荐采用网轨混合牵引供电系统的应用方案。通过对该方案中重点问题的分析,推荐采用专用回流轨和接触网同位置设置电气分段的方案,在牵引供电上网点和回流点处设双极隔离开关;推荐在负极对地之间设置单向导通装置作为漏电保护装置;推荐设置绝缘监测装置对各区段的专用回流轨对地绝缘状况进行定期监测,以便及早发现绝缘薄弱点并清查处理。     

氢能源产业技术标准化发展现况

氢能作为一种高效、清洁、可持续利用的二次能源被认为是构建未来以可再生能源为主的多元能源结构的重要载体,以其开发和利用技术为主逐渐形成全球化氢能产业规模,氢能产业技术发展离不开氢能技术标准的推动和支撑,纵观国内外氢能技术标准化的发展及现况,我国氢能技术与国外还存在很大的差距,在液氢制取与储运、船用氢能燃料电池动力系统、加氢站关键设备及部件等技术方面需要加大科研投入,预研相关技术标准,提前谋划布局,以标准引领我国氢能技术及产业快速、高质量发展。     

含初始变形船体加筋板有效宽度及剩余极限强度研究

为了评估舰船结构损伤后的剩余强度,对船体加筋板出现初始几何变形后,参与总纵强度的有效宽度和加筋板剩余极限强度进行研究。将加筋板受到垂直于平面压力后的变形,作为其初始几何变形,改变变形的方向和大小,利用有限元软件Ansys对加筋板结构进行线性和非线性分析。定义了板有效宽度计算方法,对不同变形方向和变形幅值时板的有效宽度和加筋板的极限强度进行对比分析,并拟合得到了计算板有效宽度和加筋板极限强度的经验公式。结果表明,初始几何变形会削弱加筋板结构的强度。在对损伤后船体结构强度进行分析和校核时,提出的经验公式可以直接用来计算板的有效宽度和加筋板的极限强度。     

海洋核动力平台全频段舱室噪声预报与降噪方案研究

随着新规范对船舶及海上工作平台提出了更高要求，舱室噪声的控制及优化设计越来越受到人们的关注。本文首先对全频段舱室噪声预报软件——VA One软件统计能量分析理论及软件概况进行了阐述，其次应用该软件对海洋核动力平台进行几何建模与仿真计算。通过对舱室仿真计算结果与标准指标要求的对比分析，在设计阶段提出了海洋核动力平台舱室空气噪声综合治理降噪方案，该措施可以缩短建造周期、降低制造成本，提高海洋核动力平台的舒适性与安全性，具有十分重要的经济效益和社会效益。     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

Integrated models of land use and transportation for the autonomous vehicle revolution

ABSTRACT

The advent of the autonomous vehicle (AV) will affect not only the transportation system, but also future patterns of land development. Integrated land use and transportation models will be critical tools in assessing the path forward with this technology. Key questions with respect to land use impacts of AVs arise from potential changes in sensitivity to travel and reduced demand for parking. It is an open question whether AVs will induce urban sprawl, or whether spatial economies of agglomeration will mitigate any reductions in travel time sensitivity. The deployment of shared fleets of AVs would likely reduce parking demand, producing yet to be explored impacts on property development within existing urban footprints. We perform a critical assessment of currently operational models and their ability to represent the adoption of AVs. We identify the representation of time in such models as a vital component requiring additional development to model this new technology. Existing model applications have focused on the discrete addition of new infrastructure or policy at a fixed point in time, whereas AV adoption will occur incrementally through time. Stated adaptation surveys are recommended as tools to quantify preferences and develop relevant model inputs. It is argued that existing models that assume comparatively static equilibrium have been convenient in the past, but are insufficient to model technology adoption. In contrast, dynamic model frameworks lack sufficient structure to maintain reasonability under large perturbations from base conditions. The ongoing advancement of computing has allowed models to move away from being mechanistic aggregate tools, towards behaviourally rich depictions of individual persons and firms. However, much work remains to move from projections of existing conditions into the future, to the evolution of the spatial economy as it evolves through time in response to new technologies and exogenous stresses. Principles from complex and evolutionary systems theory will be important in the development of models with the capacity to consider such dynamics.     

铁路牵引供电系统安全防护与优化技术方案硏究

为了提高铁路牵引供电系统安全防护等级,加强防范强电侵入的能力,减少雷击事故对铁路运输以及设备维护造成的经济损失,本文分析了牵引变电所常见的强电侵入类型及途径,针对现有问题逐一提出了优化技术方案,并阐述了研究思路及方案具体实施方法。     

基于Cognex视觉的机器人自动搬运控制

针对企业原有生产圆盘类连接轴的工艺,设计了基于Cognex视觉的机器人自动搬运系统,将S7-300 PLC、Cognex视觉系统和FANUC机器人系统集成在一起,实现了1台机器人同时为铣床和车床2个加工系统自动上下料;通过Profibus总线和Ethernet通讯将PLC技术、视觉技术与工业机器人结合起来,发挥了工业以太网传输速度快、信号稳定的优势,提高了机器人的柔性取料能力;目前已应用在企业当中,提高了企业的自动化程度及生产效率,降低了企业的用工支出。