悬拼梁段长线台座吻合法预制施工关键技术探讨

深圳湾公路大桥非通航孔桥梁体施工,设计为分段预制,海上拼装,预制施工线形控制和梁段间吻合匹配,这些是其关键技术。重点介绍采用长线台座吻和法预制梁段时吻和匹配施工工艺,线形控制方法,台座设计检算及施工中易出现的问题等。     

基于CIMS背景的CAPP系统体系结构的研究

本文在总结ＣＡＰＰ各单元技术发展状况和其他有关的计算机技术发展状况的基础上，结合ＣＡＰＰ系统各周边环境目前的发展状况，在对ＣＩＭＳ背景下如何考虑ＣＡＰＰ系统的体系结构问题进行了详细的论述，对若干难于处理的技术关键提出了的对策。     

B_0-B_0机车转向架直线运行横向轮/轨力和蛇行稳定性的理论研究(上)

本文根据轮/轨蠕滑理论提供了计算和分析B_0—B_0机车转向架直线运行横向轮/轨力的方法,并以SS4型电力机车作为验证实例,理论计算和实际测试的结果相接近。作者采用这种方法对轮/轨力进行可靠的分析,旨在论证我国现有电力机车转向架蛇行稳定性所要求的最佳轮对定位刚度。本文论证结果符合于作者在文献[1]中提出的轮对定位新方案,它可适用于最大运行速度为100km/h的现有SS型电力机车。     

Driver requirements and road traffic informatics

Initially the driver's role as a link in the driver-vehicle-road-traffic control-chain is discussed in a historical perspective. The gradual changes and the advantages and problems arising from these changes are discussed from behavioural point of view.Then the driver tasks are analyzed. A separation is made between trip planning, navigation, road following, traffic interaction, rule compliance, other than traffic tasks, car handling and speed choice. The relations between and the weights of these subtasks are discussed. Some existing driver behaviour models are reviewed in relation to the above mentioned tasks.Finally an effort is made based on the analyses of driver tasks and driver models to specify some general and some more specific potential advantages and problems with expected future RTI-systems.     

聚合物改性水泥混凝土路面的施工工艺

结合实际施工经验，对聚合物改性水泥混凝土路面的施工准备，混合料拌和、运输、摊铺及养生等环节进行了论述，提出了在施工中应注意的事项和完整的施工工艺方案。实践证明，聚合物改性水泥混凝土路面性能良好．成本较低，符合环境友好、资源节约型路面的理念，具有良好的社会效益和经济效益。     

基于模糊可靠性理论的高速线材轧辊优化设计研究

工作时受交变应力的作用,高速线材轧辊断裂问题时有发生.文章利用模糊可靠性理论,探讨在随机变量和模糊变量组合时轧辊的模糊可靠性设计方法.设计实例和生产实践证实了该方法具有优化设计的效果,使轧辊使用寿命显著提高.     

Finite-difference simulation of green water impact on fixed and moving bodies

A numerical method was developed to predict the water impact pressure caused by green water phenomena. The density function method was employed in the framework of a locally refined overlapping grid system. The simple problem of a rectangular body placed in regular waves was considered and the simulation results were compared with tank experiments. Good agreement with experiment was shown for wave–body interactions and for the pressure values at three different positions on the body. The case of a rectangular body with a vertical wall on the deck was also considered and the comparison showed satisfactory agreement. It was demonstrated that this method could be extended to a moving body problem, in which the body was free to undergo heave, pitch, and surge motions.     

总纵强度耦合作用下船体板架振动计算

船体在海上营运时，船体产生中拱状态弯曲和中垂状态弯曲，所以船体板架是处在复杂弯曲状态。以往船体板架振动计算都忽略了这种影响。本文讨论用有限元方法和原理应用于这类计算，推导了板架局部振动的计算方法，给出了计算实例。通过计算表明，本文方法可用于实际，为舰船振动校核计算提供了手段。     

液化天然气(LNG)接卸港工程

介绍了LNG国际贸易、接收站建设、LNG运输船、接卸港口工程的选址及设计、分销输运方式，讨论了关于《液化天然气码头设计规程》（试行）的修订意见。     

CAD／CAM技术在船舶减摇鳍设计制造中应用的思考

介绍了CAD／CAM技术以及如何应用CAD／CAM技术为减摇鳍的设计开发提供更有效的设计平台。