On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

重箱堆场地下管网施工

重箱堆场作为集装箱码头后方的存储腹地,对集装箱的储运起着十分重要的作用。文章表明,在重箱堆场施工过程中,对地下管网施工,如何选择有效的施工方法,安排控制好相关工序的衔接,是保证重箱堆场工程有条不紊进行,确保施工进度与质量的重中之重。     

曹妃甸港区规划测量水位控制的探讨

唐山港曹妃甸港区规划工程测量项目,测量范围东起大清河口(捞鱼尖),西至南堡西侧,向南测量至-20 m等深线附近水域,其岸线长达61 km,测量面积达到1 148 km<'2>,是一项超大型的测量工程.结合曹妃甸港区规划工程测量,主要阐述如何对临时水位站进行布设,以及如何解决曹妃甸理论最低潮面与当地理论最低潮面的转换关系.     

无砟轨道线路临时架空装置现场应用与测试

无砟轨道线路临时架空技术是在轨道病害修复过程中保障列车正常运行的关键。本文结合一高速铁路车站无砟轨道沉降整治工程,研发了适用于无砟轨道线路的临时架空装置。该装置以钢垫梁作为架空主体,可采用1片钢垫梁替换1块轨道板架设临时线路,也可采用多片钢垫梁替换连续多块轨道板,构成多跨连续的架空结构。架空装置施工便捷,稳定性好,安全可靠。现场应用测试结果表明,列车通过临时线路时的脱轨系数、减载率、轮轴横向力以及钢垫梁的跨中竖向、横向挠度等指标均小于相应限值。该装置所架设的临时线路能够满足高速铁路列车以速度45 km/h通行的要求。     

上海地铁车辆的临修技术[1]——走行部分及制动系统的临修

阐述了地铁车辆的临修概念及其实施流程,详细介绍了上海地铁车辆走行部与制动系统的临修技术。     

南京火车站下地铁车站修建技术

介绍南京地铁一期工程南京站用矿山法通过铁路站场的安全控制技术,即站场轨道采用施工便梁加固,大管棚超前支护,隧道施工采用CRD法。     

哈大客运专线大连枢纽列控系统方案探讨

对与CTCS-0车站相衔接的大连CTCS-3枢纽的列控系统配置、级间转换及临时限速问题进行分析,提出不同的解决方案,并分析比较不同方案的优缺点。     

BIM正向设计在高速公路互通立交工程中的应用

针对目前BIM设计普遍采用"翻模"而导致效率低下的问题,首先对BIM互通设计的要点作了阐述,其次以上浦高速互通段落为工程背景,基于Civil 3D和Revit,对地形曲面、三维道路模型以及桥梁族库的创建三个BIM正向设计的关键步骤做出分析。研究结果表明,得益于BIM设计独有的可视化操作以及动态更新机制,设计人员在设计的精确性以及设计效率上都有极大的提高。     

自锚式悬索桥钢-混结合段施工技术

南京长江隧道工程右汉独塔自锚式悬索桥,边跨混凝土箱梁与主跨钢箱梁通过钢混结合段进行连接,钢混段采取PBL剪力键及抗剪焊钉、预应力等相应措施克服因材质不同、温度等因素对梁体的影响,使全桥混凝土与钢箱梁形成一个整体,满足结构受力需要。     

拱桥有支架施工加载程序优化设计

结合和平大桥工程实例,开展了施工单位拟定的拱架加载程序变形与应力计算。针对加载程序中拱架出现的"W"型变形和应力不均匀等问题,提出了有支架施工加载程序优化的一般原则和在加载过程中拱顶临时压重的方法,在此基础上对原有拱架加载程序进行了优化。分析结果表明,优化后的加载程序使拱架变形和应力趋于合理,达到了加载程序优化设计的目的。