地铁车站装配式铺盖体系设计

论述北京地区首次在地铁9号线丰台北路站应用装配式铺盖体系。从结构计算方法、荷载选取、方案设计、铺盖板的设计及试验和支撑体系计算等方面,系统阐述装配式铺盖体系的设计要点。实践表明,装配式铺盖法能够有效降低地铁施工对周边环境和交通的影响,临时路面效果理想,同时大部分构件能够重复利用,具有良好的经济性与适用性。     

地铁地下车站公共区防排烟设计相关探讨

通过对广州、深圳等城市已通车地铁地下车站工程的分析,从设计本身以及最新规范的相关防排烟条文出发,论述地铁地下车站公共区的防排烟模式和排烟风机的选择,提出防排烟设计在防排烟模式、防烟分区划分以及排烟风机选择方面应注意的事项,并给出相应的建议.     

上海卢浦大桥施工临时索塔设计

卢浦大桥是主跨 5 5 0 m的全钢结构中承式系杆拱桥。本文介绍卢浦大桥施工中最关键的施工设备——临时索塔的设计、构造、制作及相关规范     

Theory of safety surrogates using vehicle trajectories in macroscopic and microscopic settings: Application to dynamic message signs controlled traffic at work zones

This paper presents a new mathematical framework for obtaining quantitative safety measure using macroscopic as well as microscopic traffic data. The safety surrogate obtained from the macroscopic data is in terms of analysis performed on vehicle trajectories obtained from the macroscopic data. This method of obtaining safety measure can be used for many different types of applications. The safety surrogate for the traffic dynamics are developed in terms of a new concept of Negative Speed Differentials (NSD) that involve a convolution of vehicle speed function obtained from vehicle trajectories and then performing the integration of the square of the output for its negative values. The framework is applicable to microscopic traffic dynamics as well where we can use car following models for microscopic dynamics or the LWR model for macroscopic dynamics. This paper then presents the use of this new safety surrogate on the development of a feedback control law for controlling traffic in work zones using Dynamic Message Signs. A hybrid dynamics model is used to represent the switching dynamics due to changing DMS messages. A feedback control design for choosing those messages is presented as well as a simple simulation example to show its application.     

成昆铁路矮塔斜拉桥索梁锚固区模型试验研究北大核心

为研究铁路矮塔斜拉桥索梁锚固区的受力形式,以成昆铁路金沙江大桥为工程背景,针对该桥采用的新型梁顶混凝土锚固构造,通过缩尺模型试验研究其在不同荷载下的应力分布和开裂特征。结果表明:在斜拉桥成桥恒载索力作用以及最不利荷载组合索力作用下,C7锚固块更容易发生破坏,将其作为试验构件开展缩尺模型试验,发现锚固块在不同张拉荷载作用下张拉至设计索力的过程中,应变增幅基本上线性增加,卸载后同样呈线性减小,说明混凝土受力处在线弹性阶段,且应力在规范要求范围内。在试验荷载加载至140%设计索力时,锚固块前端倒角位置开始出现细小裂纹且随荷载的增加不断开展。当荷载卸载至0时,之前出现的裂缝随荷载的减小逐渐闭合,宽度肉眼不可见,表明该构造能够满足正常使用要求且具备足够的安全储备。     

大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。     

“s”型覆岩空间结构的冲击地压危险区预测

基于微地震监测和覆岩空间结构理论，以山东华丰矿1410工作面为例，分析了“s”型覆岩空间结构的形成，利用理论方法和微地震监测预测并圈定了华丰矿1410工作面发生冲击地压的危险区域，研究了“s”型覆岩空间结构的冲击地压危险区分布规律，为现场预测和控制冲击地压灾害提供了理论基础。     

铁路工程建设通用参考图《混凝土拌和站》内容要点及应用解析

混凝土拌和站是铁路建设中数量最多的大临工程之一,规划与设计是其建设的基础工作,为实现混凝土拌和站建设的规范化和标准化设计,中铁第五勘察设计院集团有限公司主持编制铁路工程建设通用参考图《混凝土拌和站》〔通临(2012)8401〕。结合相关科研课成果和工程设计实践,对通用参考图《混凝土拌和站》的编制原则、设计参数、主要内容、适用范围及注意事项进行论述,以求更好地对通用参考图宣贯和释义。     

Obsolete Maps and Coastal Management: Case Studies from Northwest Ireland

On dynamic coastal sites, subject to rapid and sometimes unpredictable shoreline changes, management problems can be aggravated if legally authoritative maps are obsolete. These difficulties are illustrated by two case studies from County Donegal in northwest Ireland. The first case study outlines the problems that arise where statutory functional area boundaries are based on a near century-old map. The second case study deals with the problems of planning development on a site where a customized map only a few years old has been rendered obsolete by rapid coastal erosion. Other problems are caused by the inappropriate use of maps. Suggestions are made to mitigate the effects of outdated maps.     

大跨度连续钢桁架拱桥半悬臂拼装临时墩合理标高计算

当大跨度连续钢桁架拱桥采用支架法施工时，其临时支墩标高的合理设定对大桥的拼装线形和安全顺利拼装具有重要影响。结合钢桁梁桥的制造线形和架设过程中的钢梁线形变化，较系统地研究了临时墩的标高计算，推导了实用的计算公式。然后将该方法应用于某大跨度钢桁梁柔性拱组合结构桥梁，现场拼装和拆除结果表明：考虑预留50mm的设置方法，能更方便临时墩拆除，为类似桥梁施工计算提供借鉴。