爆破荷载下岩质直立边坡预应力锚板墙动力响应机理

以重庆沙坪坝铁路枢纽综合改造工程开挖形成的岩质直立边坡为原型,利用FLAC3D软件建立数值计算模型,分析预应力锚板墙边坡支护结构在不同开挖位置的爆破荷载作用下的动力响应特性。在此基础上,讨论锚杆预应力大小、爆破峰值荷载和锚固段长度几种参数对于支护结构受力状态和结构变形的影响。计算结果表明:爆破作用下锚杆轴力增量分布与静力作用下相似,并且锚杆轴力增量和板墙位移都在边坡中部达到最大,而上下位置较小。对比锚杆轴力增量和板墙水平位移增量的数值模拟和理论计算结果,验证了板—锚结构之间存在的变形协调现象。通过各种影响因素的计算结果分析得到了岩质边坡预应力锚板墙支护在爆破作用下的动力变化规律。     

Research on the Influence of Vertical Deformation of Bridge on the Track RegularityEI北大核心

Research purposes: The vertical deformation of high-speed railway (HSR) bridge will cause the track irregularity, which threatens the safe and efficient operation of the HSR. Taking the 32 m simple supported beam bridge as the research object, based on the existing mapping analytical model for bridge vertical deformation and rail geometry, the influence of the track regularity of the CRTS Ⅰ slab ballastless track structure caused by the key parameters such as the bridge vertical deformation amplitude, the hanging length of the beam end and the vertical stiffness of mortar layer were studied, and the corresponding measures to control the rail deformation were proposed, to provide theoretical reference for comprehensive treatment of rail deformation of HSR bridge. Research conclusions:(1) The pier settlement, the vertical rotation of the beam end and the beam fault will cause the rail to follow the beam deformation, and "up-warping" of the rail on the vertical deformation boundary will appear. (2) The rail deformation is directly proportional to the vertical deformation amplitude of the bridge and the key to control the rail deformation is to reduce the vertical deformation of the bridge. (3) The rail deformation can be controlled by reducing the hanging length of beam and vertical stiffness of mortar layer. (4) The research results can provide a theoretical reference for controlling the vertical rail deformation of high-speed railway bridges. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

The Reinforcement Analysis of Prestressed Anchor Frame Beam in the Deep Cutting Slope under Three Dimensional Strong EarthquakeEI北大核心

Research purposes: In order to further study the reinforcement of prestressed anchor frame beam in the deep cutting slope under three dimensional strong earthquake, a model of the deep cutting slope is built through FLAC 3D simulation software, the seismic wave to the model from three directions of x,y and z is input, and the dynamic response of the slope is analyzed. Then, the prestressed anchor frame beam reinforcement measures are applied to the model, and this paper analyzes the reinforcement effect of the prestressed anchor frame beam to the deep cutting slope under three dimensional strong earthquake. Research conclusions:(1) The prestressed anchor frame beam has a good effect on restraining the horizontal displacement of the deep cutting slope. (2) Under the three dimensional strong earthquake, the prestressed anchor frame beam has a good effect on the horizontal acceleration and horizontal velocity of the deep cutting slope, which reduces the peak of horizontal acceleration and horizontal velocity. (3) Through the comparison of the response before and after the reinforcement of the prestressed anchor frame beam is given under the 9 degrees three dimensional strong earthquake, it can be concluded that the prestressed anchor frame beam can provide good reinforcement effect to the deep cutting slope. (4) This research can be used for reference to the earthquake resistance of the slope engineering. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

单相电压型脉冲整流器中二次谐振电路的研究

从单相电压型脉冲整流器工作原理的介绍着手,分析了脉冲整流器输出存在的二次谐波电流现象,提出了二次谐振电路的设计方法,并对二次谐振电路及参数偏移时对系统产生的影响进行了详细分析,最后采用仿真与试验对分析结果进行了验证。     

集装箱中心站装卸作业线接触网终点设计

在接触网终点设计常规下锚结构形式下,集装箱中心站龙门吊装卸作业线股道接触网终点的有效行车距离无法满足电力机车直接摘挂货物列车要求。本文针对该问题提出了新型的接触网终点下锚结构形式,改进后的下锚结构形式能在不影响龙门吊作业的前提下延长接触网终点有效行车距离,满足电力机车直接摘挂取送货物列车的要求。     

基于双参数雨流法的地铁车辆转向架构架寿命评估

采用双参数雨流法对在线实测的地铁车辆转向架构架载荷时间历程进行计数统计,分离出完整的应力循环和半循环,表征了构架服役过程的随机载荷谱块。根据名义应力法理论及miner疲劳损伤累积理论,估算出了地铁车辆转向架构架的疲劳寿命。分析结果表明,测点处的寿命为13.4年左右。     

基于利益相关者理论的城市轨道交通项目需求分析

城市轨道交通项目的定位及其价值的实现,是建立在项目各方的利益需求得到平衡与满足的基础之上,因此全面识别与城市轨道交通项目紧密相关的单位或群体,并分析其各自的利益需求,对城市轨道交通项目的定位及其价值的实现显得至关重要。此文基于利益相关者理论,通过对城市轨道交通项目利益相关者的识别、核心相关者的确定及其利益需求分析,以期为城市轨道交通项目建设工作提供帮助。     

丹阳北二环大桥斜拉索施工技术

在丹阳北二环大桥斜拉索施工中,总结多座跨径小于150m的斜拉桥斜拉索施工技术,针对此前大型斜拉索施工技术进行了优化改进,特别是斜拉索的展索、挂索及张拉技术。     

紧邻既有线城际铁路路基稳定性计算与分析

紧邻既有线城际铁路建设,既需考虑既有线安全运行,又需保证新线按时保质施工。针对既有线路基边坡在新线建设开挖过程中的稳定性问题,模拟现场可能出现的不利工况,采用固结有效应力法等3种方法,计算施工开挖影响下既有线路基稳定性,采用数值分析法对其进行对比验证,并提出对地基处理方式与施工方法的修改建议,对现场施工具有一定的指导意义。     

列车集便污水好氧处理工艺试验研究

以某动车段化粪池实际出水为原水样本,采用SBR工艺重点对COD、氨氮的去除效率进行了研究,确定了列车集便污水活性污泥法好氧处理曝气时间、DO值、进水主要污染物指标浓度范围等参数。试验表明SBR工艺对列车集便污水化粪池出水中的COD仅有50%的去除效果,曝气时间超过8 h对COD去除效果的提高作用不大;集便污水NH3-N浓度在1 500 mg/L以上时,停留时间为24 h,曝气时间达到12 h,去除率可以达到70%左右;NH3-N浓度为500 mg/L时,曝气8 h,可达到80%的去除效果;SBR反应器对TP的去除率在10%～40%之间。当进水为吹脱稀释原水,COD浓度在1 000～1 500 mg/L,保持DO值在2～3 mg/L,反应周期8 h,能够达到SBR反应器的最佳运行工况,COD去除率可达80%。