液压转向系统冷启动沉故障机理及测试方法研究

液压转向系统冷启动沉故障在北方冬季是比较常见的一个故障,论文针对故障产生的机理进行了深入分析,并对产生故障的常见原因及改进方法进行了简单介绍,最后对如何确定故障源从测试方面提供了方法.     

Experimental and numerical investigation on the derailment of a railway wheelset with solid axle

This paper presents the results of an experimental and numerical investigation on the derailment of a railway wheelset with solid axle. Tests were carried out under quasi-steady-state conditions, on a full-scale roller rig, and allowed to point out the effect of different parameters like the wheelset's angle of attack and the ratio between the vertical loads acting on the flanging and non-flanging wheels. On the basis of the test results, some existing derailment criteria are analysed in this paper and two new criteria are proposed. A model of wheel–rail contact is proposed for the mathematical modelling of the flange climb process, and numerical vs. experimental comparisons are used to obtain model validation.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.     

How well a single-track linear model captures the lateral dynamics of long combination vehicles

ABSTRACT

The effect of centre-of-gravity heights on the high-speed performance measures of long combination vehicles including truck with double centre-axle trailers, Nordic, and A-double combination vehicles is investigated. The high fidelity three-dimensional models, used in this research, are validated against physical test data. These models are often accurate in terms of the actual dynamic behaviours of the vehicle. On the other hand, the simple yaw-plane single-track models with linear tires require less number of vehicle parameters. In this paper, it is investigated how accurate the estimations of performance measures are at high forward speeds by such single-track linear (STL) models. The influence of load height is especially studied. The high-speed performance-based standard or PBS measures considered are rearward amplifications of both lateral acceleration and yaw velocity; lateral load transfer; yaw damping and high-speed transient offtracking. The results show that tire relaxation has a large effect and it is rather easy to add to an STL model, so it is assumed to be modelled in STL. With realistically high payload and a required accuracy of PBS measures of approximately 10%, only the accuracy of rearward amplification of yaw velocity calculated by the frequency response is fulfilled by the STL. With low payload, the same statement is valid, but with around 5% in required accuracy. The roll dynamics effects are more important than the tire non-linearities.     

格拉斯磁环匀强磁场分析

以毕奥-萨伐尔定律为基础,建立亥姆霍兹线圈以及格拉斯磁环中心磁场分布模型,并计算了它们内部的轴向磁感应强度分布,绘出了空间分布图,分析了轴向磁感应强度与x、y坐标的关系,分析结果得到了亥姆霍兹线圈和格拉斯磁环内部匀强磁场分布区域,通过比较得到格拉斯磁环内部的匀强磁场区域比亥姆霍兹线圈内部的匀强磁场分布区域更大的结论。     

网络计划工期－费用的动态规划决策

关键路线法中网络计划工期－费用优化，可以化为一系列单阶段决策，构成确定性离散优化决策问题，本文试用动态规划处理这一过程。     

柴油机船舶推进装置的建模和实时仿真

本文根据准稳态的概念建立了适用于实时仿真的二冲程柴油机船舶推进装置的多阶一性模型。在充分多的试验数据的基础上，结合工作原理建立了各子系统及整个装置的动态模型，这种模型既能反映柴油机内部各参数，精度较高，计算工作量也比较适中。文中提出了一些经验公式，使模拟得以有效地简化。最后，作为实例给出了３５０００吨油船推进装置的实时仿直     

有限体积法在一维平底溃坝问题研究中的应用

以一维平底溃坝问题为例,讨论了有限体积法的应用。从溃坝基本方程入手,采用Roe方法计算界面数值通量,采用空间一阶、时间二阶格式（预测校正二步格式）计算溃坝问题,得到了满意的结果。     

可吊双40 ft箱的岸边集装箱起重机

目前世界上的集装箱起重机一次只能吊起一个40ft箱或2个20ft箱,ZPMC针对超巴拿马型船而开发的双40岸桥1次可吊起2个40ft箱。双40岸桥的重要特色是开发了专用的差动型起升齿轮减速箱,它可以根据电机和制动器的不同工作组合工况,实现功率的分解和叠加,既可2套吊具同时起升,也可2套吊具各自独立起升或1套吊具起升1套吊具不动,使用1套吊具时也能实现高速高效。该机是对成熟常规岸桥的改进与创新,设备成本增加不多,轮压增加不大,理论上可使装卸效率提高50% ~60%。     

大水位差集装箱码头新型装卸搬运设备方案

依托重庆寸滩集装箱码头建设条件,对山区河流大水位差条件下专业集装箱码头新型装卸搬运设备进行分析研究,提出了多个先进的、有特点的方案,供西部地区集装箱码头建设参考。