VDR图像压缩方法研究

简单介绍了船载航行数据记录仪(VDR)的基本功能、系统结构和工作原理,并对其图像压缩方法作了详细介绍.先分别介绍了离散余弦变换(DCT)和嵌入式零树小波编码(EZW)的优缺点,针对VDR图像压缩的具体情况,提出采用DCT和EZW相结合的方法,可发挥它们的优势,克服缺点,达到更好的压缩效果.     

京杭运河的船闸设计研究

简要介绍京杭运河的建设情况,分析京杭运河船闸的总平面布置设计要点及船闸输水系统和主体机构的设计要点。     

热胀冷缩法在修船工程中的应用

文章就几种应用热胀冷缩法进行安装和拆卸的实例进行分析,叙述其技术要点,找出其理论估算公式,为在施工前验证工程可行性提供了理论依据,有利于提高维修效率。     

软刚臂单点系泊装置监测预报系统的设计及实现

为进一步保障浮式生产储油装置(FPSO)的作业安全,通过海洋环境条件测量、FPSO运动和单点系泊系统(SPM)状态监测以及理论计算等手段,实现了软刚臂单点系泊监测预报系统的方案设计,并成功应用于渤海油田。经现场应用验证,该系统能够实现对FPSO及SPM运行情况的监测,为作业者提供FPSO操作指导及预警,有效的降低了作业风险。     

建设广西和谐水运的思考

“十一五”时期是我区经济由艰难爬坡向经济起飞转变的重要时期,也是我区加强加快建设、深化改革、加快航运事业发展的黄金发展期,更是我区实现由传统航运向现代航运转变的战略机遇期。文章回顾了“十五”期间广西水运建设的发展,提出“十一五”时期广西建设和谐水运应重点关注的若干问题。     

下穿既有公路的土江冲隧道双层管棚设计及监测分析

位于常—吉高速公路上的土江冲隧道是一座下穿既有公路的四车道连拱隧道,施工中为了控制地面沉降,在洞口段采用双层管棚作为辅助施工方法,保证了隧道施工安全和319国道的畅通;在隧道开挖过程中,掌子面附近的管棚变形最大,隧道开挖纵向影响范围为1.5~2.0倍开挖高度。文章介绍了管棚设计、施工情况和监测结果。     

成品油管道水击保护

长距离成品油管道在密闭输送过程中,出现非正常停泵、误关阀门及混油界面经过泵等均会引起水击现象发生。水击波沿管道传播,极易导致管道局部超压而造成管道破裂、损坏设备等,故水击保护成为成品油管道密闭输送关键性的工艺技术之一。金嘉湖成品油管道在全线水击保护控制方面采用了进出站压力调节系统、分输站分油流量调节系统、出站压力超高泄放系统、进站低压泄放保护系统、进出站压力超限停泵联锁保护系统来保证管道事故工况时的安全。     

Differences in single heavy vehicle crashes at intersections and midblocks

The objective of this research is to identify the factors differentiating between single heavy vehicle collisions at intersections and midblocks by using a binary logit model. Our results show that single vehicle crashes involving heavy vehicle at intersections are more likely to occur on main roads and highways, whereas crashes at midblocks are more likely to occur on divided two‐way roads, roads with special facilities or features (e.g. bridge) and roads with a higher percentage of heavy vehicle traffic. Intersection crashes are also more likely to involve vehicles that are turning left or right, resulting in angle crashes and vehicle overturn, whereas midblock crashes are more likely to involve vehicles on higher posted speed roads. Copyright © 2017 John Wiley & Sons, Ltd.     

海底单层保温管线总传热系数分析

总传热系数K是海底热油管道的运行管理中的一个非常关键的参数.文中通过对中海油涠洲11 -1油田至涠洲12 -1油田之间的海底管道总传热系数进行理论计算,并与投产前根据实际预热数据反算的总传热系数进行对比,得出理论计算的总传热系数与实际预热反算得到的总传热系数相近,同时指出海管接口的散热损失较大,海底管线应对接口部分进行...     

A practical capacity model of a single track line

The paper presents a model for determining the practical capacity of a single track line, i.e. the maximum number of trains which can be run along it in a time unit under the condition that each train enters its bottleneck segment with a definite delay.

The input data used in the model are: geometrical characteristics of the bottleneck segment of the line under study, the intensity and structure of demand expressed by a number of trains which are run over the line in a given time unit, the scenario of traffic running over the line under study and the operational tactics of individual train categories processing on the bottleneck segment.

(Two tactics can be applied in the train processing on the line under study; first, the trains of individual categories are given different priorities in the processing, and second, all the trains have the same priority).

The output results of the model are average delays of trains of each category occurring within the train processing performed on the bottleneck segment of the line under study in a given time unit.